• Journal of the Korea Institute of Building Construction
• /
• v.19 no.4
• /
• pp.307-312
• /
• 2019

Sludge generated in the production of ready-mixed concrete is classified as waste and processed at a high cost. In particular, small and medium-sized ready-mix manufacturer are burdened with such costs, and some companies are illegally processing them. Therefore, the purpose of this study is to suggest a method for recycled remicon sludge as a concrete block composition. When the remicon sludge is simply dried, the residual chemical admixture and ettringitee contained in the sludge are present, so that the compressive strength of the concrete block and the compressive strength after freezing and thawing are largely deteriorated to meet the quality standards of the concrete shore and retaining wall block It was not possible to do. As a method for satisfying the physical performance, it was found that the remicon sludge was calcined at a high temperature of about $900^{\circ}C$. to decompose ettringite and residual chemical admixture and then used it.

• Journal of the Society of Disaster Information
• /
• v.18 no.3
• /
• pp.495-506
• /
• 2022

Purpose: When a serious disaster occurred in East Japan on March 11, 2011, some evacuees in shock failed to avoid danger to the best of their ability. Why did they hesitate and waste their time? And why didn't they choose correct escaping routes? This study attempts to classify human behavior through psychological point of view and cognitive science and to interpret behavioral patterns based on animal behaviors from the field of biology. Method: This study first conceptually categorized walking behavior into intellectualization, automaticity and instinct based on the existing literature and matched these with empirical data. Result: The actual walking patterns observed failed to be compatible with these categories and consequently, this study suggests the following five categories: normal, busy, fast & straight, freezing and tizzy. This new classification of walking behavior is based on speed, variation of speed and change of direction. Conclusion: The method used in this study and the results can be applied to simulations of walking behavior and analysis of behavior in emergency situations.

• Korean Journal of Plant Resources
• /
• v.35 no.4
• /
• pp.428-434
• /
• 2022

Glycyrrhizae Radix is an herbal medicine vulnerable to fungi. So there are regulations on mycotoxins. Therefore, in this study, the affect of various drying methods and additional gamma irradiation (10 kGy) was studied to suppress the microbial generation of Glycyrrhizae Radix. As a result of detecting and comparing microorganisms using the dry film method for samples prepared by each of natural, hot air, freezing, microwave drying and gamma irradiation, the affect of reducing microorganisms by microwave drying and gamma irradiation was confirmed. There was no statistically significant change in the content of the active compounds between the treatment groups.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.3
• /
• pp.91-98
• /
• 2024

In this paper, we present a particle-grid blending framework based on a geometric approach to efficiently represent opaque ice spheres with air bubbles. The water temperature is diffused through the grid and the air bubbles represented inside the ice through the particles. To solve the problem of previous methods that generate noisy dissolved air fields, we use levelsets to lighten the algorithm, i.e., the number of active particles and the initial amount of dissolved oxygen can be used to efficiently control the termination conditions of heat diffusion. We also extend the previous dissolved air field method, which only computes near air bubbles, to transparent regions to represent realistic ice spheres, and introduce a levelset-based approach to accurately compute the orientation of particles. As a result, the method presented in this paper is about three times faster than the existing methods and shows visually improved visualization of opaque ice spheres, which can be used in the field of representing physical virtual ice forms.

• Korean Journal of Poultry Science
• /
• v.40 no.3
• /
• pp.207-216
• /
• 2013

This study was conducted to establish the method for preserving PGCs that enables long-term storage in liquid nitrogen for developmental engineering or preservation of species. The purpose of this study is to clarify the effects of freeze-thaw treatment on viability of PGCs in chickens. PGCs were collected separately from a germinal gonad of an early embryo of 5.5~6 day (stage 28) of Isa brown, Korean Oge (KO), White Leghorn and Commercial breeds. PGCs separated from a germinal gonad of an early embryo of 5.5~6 day (stage 28) are suspended in a freezing medium containing a freezing and protecting agents (e.g. dimethyl sulfoxide (DMSO), ethylene glycol (EG) and glycerol). The PGCs were then purified using magnetic activated cell sorting (MACS) method. The viability of PGCs after thawing was $87.4{\pm}0.4%$ and $89.4{\pm}0.2%$ with the 10% EG treatments with no significant difference between the Isa brown and Commercial breeds. The viability of PGCs after freeze- thawing was significantly higher for Isa brown ($87.4{\pm}0.4%$) and Commercial breeds ($89.4{\pm}0.2%$) than Korean Oge (KO) ($77.6{\pm}1.1%$) and White Leghorn ($76.2{\pm}0.9%$)(p<0.05) using 10% EG cryoprotectant. This study established a method for pre- serving chicken PGCs that enables systematic storage and labeling of cryopreserved PGCs in liquid ($LN_2$) at agermplasm repository and ease of entry into a data base. In the future, the importance for this new technology is that poultry lines can be conserved while work is being conducted on improving the production of germline chimeras.

• Restorative Dentistry and Endodontics
• /
• v.34 no.4
• /
• pp.356-363
• /
• 2009

The purpose of this study was to evaluate the viability of periodontal ligament cells in rat teeth using slow cryo-preservation method under pressure by means of MTT assay and WST-1 assay. Eighteen teeth of Sprague-Dawley white female rats of 4 week-old were used for each group. Both sides of the first and second maxillary molars were extracted as atraumatically as possible under Tiletamine anesthesia. The experimental groups were group 1 (Immediate control), group 2 (Cold preservation at $4^{\circ}C$for 1 week), group 3 (Slow freezing), group 4 (Slow freezing under pressure of 3 MPa). F-medium and 10% DMSO were used as preservation medium and cryo-protectant. For cryo-preservation groups, thawing was performed in $37^{\circ}C$water bath, then MTT assay and WST-1 assay were processed. One way ANOVA and Tukey method were performed at the 95% level of confidence. The values of optical density obtained by MTT assay and WST-1 were divided by the values of eosin staining for tissue volume standardization. In both MTT and WST-1 assay, group 4 showed significantly higher viability of periodontal ligament cells than group 2 and 3 (p < 0.05), but showed lower viability than immediate control group. By the results of this study, slow cryo-preservation method under pressure suggests the possibility for long term cryo-preservation of the teeth.

• Korean Journal of Animal Reproduction
• /
• v.15 no.1
• /
• pp.49-57
• /
• 1991

This study was carried out to investigate the effect of equilibration time, precooling and straw loading method on the post-thaw survival rates of mouse embryos cryopreserved by vitrification method. The effect of the vitrification procedure on the damage of the embryos was also examined by the straining of nuclei using Hoechst 33342. The results obtained were summarized as follows; 1. The equilibration in Medium-1 for 10 minutes was considered to be the optimum equilibration time. Embryos equilibrated in Medium-1 for 10 minutes(81.0%) showed significantly(P<0.05) higher survival rates than those equilibrated for 5 minutes(40.0%) or 15 minutes(74.1%). 2. The survival rate of embryos cryopreserved using the double Medium-2 column(81.0%) was significantly(P<0.01) higher than that using the single Medium-2 column, whish was considered to be due to the double Medium-2 column method being more reliable for preventing contamination of diluent solution of 1M sucrose. 3. The survival rate of compacted morula stage embryos cryopreserved with the precooled and non-precooled Medium-2 was not significantly(P<0.05) different. 4. The number of blastomeres of embryos at late blastocyst stage after culture of mouse morulae for 24 to 28hours was significantly(P<0.05) decreased by freezing embryos using vitrification(53.3${\pm}$1.6 vs 41.4${\pm}$1.5), which was considered to be due to the damage of embryos during vitrification and the delay of embryo development by handling in vitro. 5. The vitrification procedure is considered to be a very simple and efficient method for cryopreservation of embryos at early developmental stage.

• Journal of Plant Biotechnology
• /
• v.49 no.3
• /
• pp.187-192
• /
• 2022

The repeated monthly or weekly subculture of plant callus is labor intensive and increases the risk of somaclonal variation from the parental callus line. The most effective method for preserving plant callus is cryopreservation, which involves storage in liquid nitrogen. However, this method cannot be applied to the callus of different plant species in the same manner, so it is difficult to develop a standardized cryopreservation method. In addition, the survival rate of the frozen callus after thawing and the regeneration rate after survival are uncertain. Therefore, it is necessary to develop a method to extend the subculture interval of plant callus in an active state. In this study, active plant calli of various species without freezing was incubated at 15℃ for 4 to 12 weeks without subculture. After 12 weeks, 8 lines of plant callus grew less than 2-fold when cultured at 25℃, but at least 2 times as much when cultured at 15℃. Moreover, total antioxidant activity did not differ significantly between plant callus recovered at 25℃ after culturing at 15℃ or at 25℃. These results show that the subculture interval can be extended at a temperature of 15℃ without need for modified medium composition or additional processes. In addition, positive results in all calli of several plant species are expected to reduce labor as well as somaclonal variation by increasing the subculture.

• International Journal of Highway Engineering
• /
• v.17 no.3
• /
• pp.85-95
• /
• 2015

PURPOSES : Recently, bonded concrete overlay has been used as an alternative solution in concrete pavement rehabilitation since its material properties are similar to those of the existing concrete pavements. Deteriorated concrete pavements need rapid rehabilitation in order to prevent traffic jams on Korean expressways. Moreover, speedy and effective repair methods are required. Therefore, the use of bonded concrete overlay with ultra-rapid hardening cement has increased in an effort to reopen promptly the expressways in Korea. However, mobile mixer is required for ultra-rapid hardening cement concrete mixing in the construction site. The use of mobile mixer causes various disadvantages aforementioned such as limitation of the construction supply, open-air storage of mixing materials, increase in construction cost, and etc. In this study, therefore, hydration accelerator in-situ mixing on polymer modified concrete produced in concrete plant is attempted in order to avoid the disadvantages of existing bonded concrete overlay method using ultra-rapid hardening cement. METHODS : Bonded concrete overlay materials using ultra-rapid hardening cement should be meet all the requirements including structural characteristics, compatibility, durability for field application. Therefore, This study aimed to evaluate the application of hydration accelerator in-situ mixing on polymer modified concrete by evaluating structural characteristics, compatibility, durability and economic efficiency for bonded concrete overlay. RESULTS : Test results of structural characteristics showed that the compressive, flexural strength and bond strength were exceed 21MPa, 3.15MPa and 1.4MPa, respectively, which are the target strengths of four hours age for the purpose of prompt traffic reopening. In addition, tests of compatibility, such as drying shrinkage, coefficient of thermal expansion and modulus of elasticity, and durability (chloride ions penetration resistance, freezing-thawing resistance, scaling resistance, abrasion resistance and crack resistance), showed that the hydration accelerator in-situ mixing on polymer modified concrete were satisfied the required criteria. CONCLUSIONS : It was known that the hydration accelerator in-situ mixing on polymer modified concrete overlay method was applicable for bonded concrete overlay and was a good alternative method to substitute the existing bonded concrete overlay method since structural characteristics, compatibility, durability were satisfied the criteria and its economic efficiency was excellent compare to the existing bonded concrete overlay methods.

• Journal of Pharmaceutical Investigation
• /
• v.25 no.3
• /
• pp.249-264
• /
• 1995

Although liposome has many advantages as a pharmaceutical dosage form, its application in the industrial field has been limited because of some problems such as preparation method, reproducibility, scale-up, stability and sterilization etc. Liposomes prepared by microemulsification method had defined size, narrow size distribution, reproducibility and high entrapment efficiency. For enhancing the stability, the dry form of liposome was recommended. These types of liposome are proliposome and freeze-dried liposome. The liposome must have some properties for preparing of freeze-dried liposome; small size $(50{\sim}200\;nm)$, narrow size distribution and cryoprotectant. In this experiment, the liposomes containing 5-Fluorouracil(5-FU) and its prodrug(pentyl-5-FU-1-acetate; PFA, hexyl-5-FU-1-acetate; HFA) were made with soybean phosphatidylcholine, cholesterol, stearylamine(SA) and dicetyl phosphate(DCP) employing hydration method or microemulsification method using $Microfluidizer^{TM}$. Both or liposome types were MLV and MEL. After preparation, freeze drying and rehydration were performed. In the process of freezing, trehalose(Tr) was added as a cryoprotectant. Their evaluation methods were as follows; entrapment efficiency, mean particle size and size distribution, dissolution test, retain of entrapment efficiency and turbidity after freeze-drying. The results are summarized as belows. The entrapment efficiency of 5-FU was dependent on total lipid concentration and cholesterol content but that of PFA and HFA was decreased when cholesterol was added. When DCP and SA were added, entrapment efficiency was decreased. As the partition coefficient of drug was increased, entrapment efficiency was increased. Under the same condition, entrapment efficiency of MEL is similar to that of MLV. The mean particle size and size distribution of MEL were smaller than those of MLV. Dissolution rates of drug from both liposome types were comparatively similar. Dissolution rates of drugs with serum and liver homogenate were faster than without these material. After preparation of liposome, free drug was removed efficiency by Dowex 50W-X4. When liposome was freeze-dried and then rehydrated in the presence of Tr, characteristics of liposome were maintained well in MEL than MLV. Tr Was used successfully as a cryoprotectant in the process of freeze drying and the optimal ratio of Tr:Lipid was 4:1(g/g).