• Journal of Advanced Navigation Technology
• /
• v.12 no.4
• /
• pp.332-340
• /
• 2008

In this paper, comparisons of the superimposition schemes for orthogonal frequency division multiplexing (OFDM) system are made. The time domain superimposition of data (TDSD) has a tradeoff between the degree of freedom for data transmission and inter-carrier interference (ICI). While SPPT and APSB experiences the increases of interference as the transmit data rate increases, TDSD can effectively improve spectral efficiency by exploiting preprocessing structures which prevents interference between the signals in the different domain. TDSD which we proposed is compared with the conventional superimposition schemes or OFDM, such as SPPT (the superimposed periodic pilot in the time domain) and APSB (the added pilot semi-blind channel estimation) by simulation. As the result, comparing the conventional OFDM, TDSD can increase the spectral efficiency up to about 20% with the superimposition factor M=16 while SPPT has the similar efficiency. APSB has the worst efficiency.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.385-387
• /
• 1994

Optical interconnections are more attractive than electronic interconnections because of their higher speed, freedom from planar constraints, immunity to electromagnetic interference effects and higher interconnection capacity. Volume hologram is one of the best way to implement optical interconnections. Diffraction efficiency and crosstalk effect are very important things for ensuring independent interconnections. Recently, a general systematic method that can handle a large number of superposed volume gratings in anisotropic host material is presented. In this study for numerical analysis of diffraction, above method is programmed in general form near Bragg angle. Diffraction orders for variation of grating strength are determined by comparing with the coupled-mode method. The effects of parameter variation are considered. Parameters include vertical and azimuthal incident angle, wavelength and interaction length. Diffraction analyses are also performed for intra-mode and inter-mode diffractions.

• Journal of computational fluids engineering
• /
• v.16 no.1
• /
• pp.36-41
• /
• 2011

Numerical simulation of air-launched rockets from a helicopter was conducted to investigate the aerodynamic interference between air-launched rocket and helicopter. For this purpose, a three-dimensional inviscid flow solver has been developed based on unstructured meshes. An overset mesh technique was used to describe the relative motion between rocket and rocket launcher. The flow solver was coupled with six degree-of-freedom equation to predict the trajectory of free-flight rockets. For the validation, calculations were made for the impinging jet with inclined plate. The rotor downwash of helicopter was calculated and applied to simulation of air-launched rocket. It is shown that the rotor downwash has non-negligible effect on the air-launched rocket and its plume development.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.6
• /
• pp.121-126
• /
• 2006

Snap-fit is being used in manufacture of plastic products. Integral features using snap-fit are classified as locks, locators and enhancements. Locking features complete the process of attachment by providing physical interference to prevent separation. Looking feature pairs consist of two components, i.e., a flexible latch and a rigid catch and require particular care and attention for their selection. We can make several locking feature pairs by selecting latch and catch, but some parts restrict freedom of selection. Therefore, part designers must know the characteristic properties of generic locking feature forms as considering a specific design problem. In this paper, it has been presented about problem of small size products using locking feature and then introduced new locking feature applicable to small parts.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.9
• /
• pp.2358-2367
• /
• 1994

This paper presents techniques for evaluation and compensation of total measuring errors in a commercial CMM. The probe errors as well as the machine geometric errors are assessed from probing of the mechanical artefacts such as shpere, step, and rings. For the error compensation, the integrated volumetric error equations are considered, including the probe error adn the machine geometric error. The error compensation is performed on the absolute scale coordinate system, in order to overcome the redundant degree of freedom in the CMM with multi-axis probe. A interface box and corresponding software driver are developed for data intercepting/correction between the machine controller and machine, thus the volumetric errors can be compensated in real time with minimum interference to the operating software and hardware of a commercial CMM. The developed system applied to a practical CMM installed on the shop floor, and demonstrated its performance.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.13 no.6
• /
• pp.279-288
• /
• 2018

As a result of the technological advances in the E / E system, automotive system can provide advanced functions for safety and comfort. In addition, mechanical systems is changed to the electronic system. And the systems perform cooperative functions through communication. So the E / E system becomes more complicated as the size of the system increases. In order to secure the safety of complicated E / E system, ISO26262 standard require that Freedom from Interference and Sufficient Independence be met. In this paper, we propose a software scheduling method that can guarantee the independence between decomposed components after software decomposition and software development of ASIL D level EPB (Electronic Parking Brake) system.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1991.10a
• /
• pp.124-130
• /
• 1991

5-axis NC machining of sculptured surface using non-ballendmill cutters (eg. facemilling cutters) is widely used in the machining of turbine blades and marine propellers. Since there are more degrees of freedom in 5-axis machining than in 3-axis machining, generating "optimum" cutter paths and finding desirable cutter positions become very important in order for an efficient use of 5-axis NC machines. Also critical in 5-axis NC machining are collision avoidance, gouging checking, and efficient kinematic solutions. In this paper we discuss the above issues in generating 5-axis CL data. They are : kinematics modeling of NC machine; inverse kinematics solution; interference between machine component and surface; cutter gouging. A unique search method for obtaining optimal CL data is proposed. The proposed method has been successfully implemented in the machining of marine propellers on a dual 5-axis (ie, 9-axis) NC machine.C machine.

• Journal of Communications and Networks
• /
• v.18 no.6
• /
• pp.884-891
• /
• 2016

The wireless mesh network (WMN) has attracted significant interests as a broadband wireless network to provide ubiquitous wireless access for broadband services. Especially with incorporating multiple orthogonal channels and multiple directional antennas into the WMN, each node can communicate with its neighbor nodes simultaneously without interference between them. However, as we allow more freedom, we need a more sophisticated algorithm to fully utilize it and developing such an algorithm is not easy in general. In this paper, we study a joint channel assignment, link scheduling, routing, and rate control problem for the WMN with multiple orthogonal channels and multiple directional antennas. This problem is inherently hard to solve, since the problem is formulated as a mixed integer nonlinear problem (MINLP). However, despite of its inherent difficulty, we develop an algorithm to solve the problem by using the generalized Benders decomposition approach [2]. The simulation results show the proposed algorithm provides the optimal solution to maximize the network utility, which is defined as the sum of utilities of all sessions.

• International journal of advanced smart convergence
• /
• v.8 no.3
• /
• pp.61-68
• /
• 2019

Spatial modulation (SM) is the first proposed space modulation technique. By further utilizing the quadrature spatial dimension, quadrature spatial modulation (QSM) has been developed as an amendment to SM system to enhance the overall spectral efficiency. Both techniques are capable of entirely eliminating interchannel interference (ICI) at the receiver. In this paper, we propose a simple adaptive hybrid switching transmission scheme to obtain better system performance than SM and QSM systems under a fixed transmission date rate. The presented modulator selection criterion for switching between spatial modulator and quadrature spatial modulator is based on the larger received minimum distance of spatial modulator and quadrature spatial modulator to exploit the spatial channel freedom. It is shown through Monte Carlo simulations that the proposed hybrid SM and QSM switching system yields lower error performance than the conventional SM and QSM systems under the same fixed data rate and thus can provide signal to noise ratio (SNR) gain.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.11a
• /
• pp.217-218
• /
• 2010

본 논문은 3-사용자 X 채널 상황에서 다중안테나를 이용하여 간섭을 완벽하게 제어하는 기법에 대해 제안한다. 기존에 제안된 방식이 빔포밍(beamforming) 벡터를 다수의 채널을 사용하여 만드는데 따른 비현실적인 문제와 간섭을 완벽하게 제어하기 위한 무한한 채널 사용의 필요성에 따른 문제점을 본 논문에서는 다중안테나를 이용하여 공간적 특성을 이용한 빔포밍 벡터를 형성하고 채널의 확장 없이 간섭을 완벽히 제어하도록 하는 시스템을 제안한다. 제안한 시스템은 9개의 DOF(Degrees of freedom)을 얻을 수 있음을 모의실험 결과를 통해 확인할 수 있다.