• 제목/요약/키워드: Free-formed

검색결과 944건 처리시간 0.032초

Label-free Femtomolar Detection of Cancer Biomarker by Reduced Graphene Oxide Field-effect Transistor

  • Kim, Duck-Jin;Sohn, Il-Yung;Jung, Jin-Heak;Yoon, Ok-Ja;Lee, N.E.;Park, Joon-Shik
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
    • /
    • pp.549-549
    • /
    • 2012
  • Early detection of cancer biomarkers in the blood is of vital importance for reducing the mortality and morbidity in a number of cancers. From this point of view, immunosensors based on nanowire (NW) and carbon nanotube (CNT) field-effect transistors (FETs) that allow the ultra-sensitive, highly specific, and label-free electrical detection of biomarkers received much attention. Nevertheless 1D nano-FET biosensors showed high performance, several challenges remain to be resolved for the uncomplicated, reproducible, low-cost and high-throughput nanofabrication. Recently, two-dimensional (2D) graphene and reduced GO (RGO) nanosheets or films find widespread applications such as clean energy storage and conversion devices, optical detector, field-effect transistors, electromechanical resonators, and chemical & biological sensors. In particular, the graphene- and RGO-FETs devices are very promising for sensing applications because of advantages including large detection area, low noise level in solution, ease of fabrication, and the high sensitivity to ions and biomolecules comparable to 1D nano-FETs. Even though a limited number of biosensor applications including chemical vapor deposition (CVD) grown graphene film for DNA detection, single-layer graphene for protein detection and single-layer graphene or solution-processed RGO film for cell monitoring have been reported, development of facile fabrication methods and full understanding of sensing mechanism are still lacking. Furthermore, there have been no reports on demonstration of ultrasensitive electrical detection of a cancer biomarker using the graphene- or RGO-FET. Here we describe scalable and facile fabrication of reduced graphene oxide FET (RGO-FET) with the capability of label-free, ultrasensitive electrical detection of a cancer biomarker, prostate specific antigen/${\alpha}$ 1-antichymotrypsin (PSA-ACT) complex, in which the ultrathin RGO channel was formed by a uniform self-assembly of two-dimensional RGO nanosheets, and also we will discuss about the immunosensing mechanism.

  • PDF

All-trans Retinoic Acid Release from Surfactant-free Nanoparticles of Poly(DL-lactide-co-glycolide)

  • Jeong, Young-Il;Kim, Don-Gon;Jang, Mi-Kyeong;Nah, Jae-Woon;Kim, Yong-Bae
    • Macromolecular Research
    • /
    • 제16권8호
    • /
    • pp.717-724
    • /
    • 2008
  • In this study, we prepared all-trans retinoic acid (ATRA)-encapsulated, surfactant-free, PLGA nanoparticles. The nanoparticles were formed by nanoprecipitation process, after which the solvent was removed by solvent evaporation or dialysis method. When a nanoparticle was prepared by the nanoprecipitation - solvent evaporation method, the nanoparticles were bigger than the nanoparticles of the nanoprecipitation - dialysis method, despite the higher although loading efficiency. Nanoparticles from the nanoprecipitation - dialysis method were smaller than 200 nm in diameter, while the loading efficiency was not significantly changed. Especially, nanoparticles prepared from DMAc, 1,4-dioxane, and DMF had a diameter of less than 100 nm. In the transmission electron microscopy (TEM) observations, all of the nanoparticles showed spherical shapes. The loading efficiency of ATRA was higher than 90% (w/w) at all formulations with exception of THF. The drug content was increased with increasing drug-feeding amount while the loading efficiency was decreased. In the drug release study, an initial burst was observed for $2{\sim}6$ days according to the variations of the formulation, after which the drug was continuously released over one month. Nanoparticles from the nanoprecipitation - dialysis method showed faster drug release than those from the nanoprecipitation - solvent evaporation method. The decreased drug release kinetics was observed at lower drug contents. In the tumor cell cytotoxicity test, ATRA-encapsulated, surfactant-free, PLGA nanoparticles exhibited similar cytotoxicity with that of ATRA itself.

등방성 직사각형의 3변 고정 1변 자유 얇은 탄성판에 대한 기존 해석해의 분석 (Analysis of the Existing Analytical Solutions for Isotropic Rectangular Thin Elastic Plates with Three Edges Clamped and the Other Free)

  • 서승남
    • 대한토목학회논문집
    • /
    • 제26권1A호
    • /
    • pp.117-132
    • /
    • 2006
  • 3변 고정 1변 자유 직사각형 얇은 판에 대한 기존 해석해를 무차원식으로 유도하고 특성을 분석하였다. Timoshenko와 Woinowsky-Krieger의 방법(1959)은 변장비가 1보다 작은 경우에만 제한적으로 해가 존재하여 처짐 특성에 대한 실용적인 해가 되지 않음을 밝혔다. 굴정(堀井)와 본(本)의 방법(1968)에 수치안정을 위한 항을 추가하여 최대 150개 항까지 구성된 급수해를 구하였고 이로부터 계산한 휨 모멘트의 수렴을 분석하였다. 수정 굴정(堀井)와 본(本)의 방법은 모든 변장비에 대한 처짐 특성을 구할 수 있으나 고정단과 자유단이 접하는 교차점에서의 모멘트 계산은 자유단 경계조건을 만족하지 않으며 그 원인을 분석하였다.

리플로우 솔더링 공정 조건에 따른 Sn-Bi-Ag와 Sn-Ag-Cu 복합 무연 솔더 접합부 특성 연구 (A Study on Properties of Pb-free Solder Joints Combined Sn-Bi-Ag with Sn-Ag-Cu by Conditions of Reflow Soldering Processes)

  • 김자현;천경영;김동진;박영배;고용호
    • 마이크로전자및패키징학회지
    • /
    • 제29권3호
    • /
    • pp.55-61
    • /
    • 2022
  • 본 연구에서는 용융온도가 중온계 무연 솔더인 Sn-3.0Ag-0.5Cu(SAC305)와 저온계 무연 솔더인 Sn-57Bi-1Ag를 사용하여 형성된 복합 무연 솔더 접합부의 특성에 대하여 보고 하였다. SAC305 솔더볼이 형성된 ball grid array(BGA) 패키지와 Sn-57Bi-1Ag 솔더 페이스트가 도포된 flame retardant-4(FR-4) 인쇄회로기판(printed circuit board, PCB)을 리플로우 솔더링 공정을 이용하여 복합 무연 솔더 접합부를 형성 하였다. 공정 온도 프로파일을 두 가지 형태로 달리하여 리플로우 솔더링 공정을 진행하였으며 리플로우 솔더링 공정 조건에 따른 계면 반응, 금속간화합물(intermetallic compound, IMC)의 형성, Bi의 확산 거동 등 복합 무연 솔더 접합부 계면 특성을 비교 분석 하였다. 또한, 열 충격 시험을 통하여 리플로우 솔더링 공정에 따른 복합 무연 솔더 접합부의 신뢰성 특성을 비교하고 열 충격 시험 전후 전단 시험을 진행하여 접합부의 기계적 특성 변화를 분석하였다.

진공성형을 이용한 삼엽식 고분자 심장판막의 제작과 혈류역학적 성능평가 (Assessment of Hemodynamic Properties of Trileaflet Polymer Heart Valve Manufactured By Vacuum Forming Process)

  • 김경현;황창모;정기석;안치범;김범수;이정주;남경원;선경
    • 대한의용생체공학회:의공학회지
    • /
    • 제27권6호
    • /
    • pp.418-426
    • /
    • 2006
  • In the artificial heart application, productivity and hemodynamic properties of artificial heart valves are crucial in successiful application to long term in vivo trials. This paper is about manufacture and assessment of trileaflet polymer heart valves using vacuum forming process(VFP). The VFP has many advantages such as reduced fabrication time, reproducibility due to relatively easy and simple process for manufacturing. Prior to VFP of trileaflet polymer heart valves, polyurethane(Pellethane 2363 80AE, Dow Chemical) sheet was prepared by extrusion. The sheets were heated and formed to mold shape by vacuum pressure. The vacuum formed trileaflet polymer heart valves fabrication is composed of two step method, first, leaflet forming and second, conduit forming. This two-step forming process made the leaflet-conduit bonding stable with any organic solvents. Hydrodynamic properties and hemocompatibility of the vacuum formed trileaflet polymer heart valves was compared with sorin bicarbon bileaflet heart valve. The percent effective orifice area of vacuum formed trileaflet polymer heart valves was inferior to bileaflet heart valve, but the increase of plasma free hemoglobin level which reflect blood damage was superior in vacuum formed trileaflet polymer heart valves Vacuum formed trileaflet polymer heart valves has high productivity, and superior hemodynamic property than bileaflet heart valves. Low manufacturing cost and blood compatible trileaflet polymer heart valves shows the advantages of vacuum forming process, and these results give feasibility in in vivo animal trials in near future, and the clinical artificial heart development program.

Cu-Ni 첨가형 열연강판의 열간균열현상에 관한 연구 (A Study on the Hot Cracking Phenomena of Cu-Ni Bearing Hot Rolled Steels)

  • 윤인택;조열래;김순호;김인배
    • 한국재료학회지
    • /
    • 제9권4호
    • /
    • pp.335-340
    • /
    • 1999
  • The hot cracking phenomena and phase behaviors during hot working process of Cu-Ni bearing hot rolled steels were investigated by a $90^{\circ}$bending tests, BSE image analysis and EDS analysis. For aNi-free 1.2% Cu bearing steel, the surface hot cracking occurred about $1100^{\circ}C$ due to a liquid state Cu-enriched phase formed continuously at the interface between oxide scale and matrix. The liquid Cu-enriched phase penetrated into austenite grain boundaries and caused surface cracking during the hot working. In case of 0.6% Ni containing 1.2% Cu-Ni bearing steel, solid state Cu-Ni-riched phase existed at the scale/matrix interface as a discontinuous type. But the higher addition of 1.2% Ni, solid state Ni-Cu-riched phase was formed dominantly in the oxide scale. It was found that the addition of Ni suppressed the surface cracking of 1.2% Cu bearing steel by eliminating the liquid state Cu-enriched phase.

  • PDF

Copolymerization of N-Vinyl Pyrrolidone with Functionalized Vinyl Monomers: Synthesis, Characterization and Reactivity Relationships

  • Vijaykumar, S.;Prasannkumar, S.;Sherigara, B.S.;Shelke, N.B.;Aminabhavi, Tejraj M.;Reddy, B.S.R.
    • Macromolecular Research
    • /
    • 제17권12호
    • /
    • pp.1003-1009
    • /
    • 2009
  • Copolymers of N-vinylpyrrolidone (NVP) comonomer with styrene (St), hydroxypropyl methacrylate (HPMA) and carboxyphenyl maleimide (CPMI) were synthesized by free radical polymerization using 2,2'-azobisisobutyronitrile (AIBN) initiator in 1,4-dioxane solvent. The copolymers formed were characterized by FTIR, $^1H$ NMR and $^{13}C$ NMR techniques and their thermal properties were studied by DSC and TGA. Copolymer composition was determined by $^1H$ NMR and/or by elemental analysis and monomer reactivity ratios (MRR) were estimated by the linear methods of Kelen-Tudos (K-T) and extended Kelen-Tudos (EK-T) and the non-linear approach. Copolymers of St and HPMA with NVP formed blocks of one of the monomer units, whereas alternating copolymers were obtained in CPMI-NVP, depending upon the side chain substitution. The MRR values are discussed in terms of monomer structural properties such as electronegativity and electron delocalization. The sequence distribution of monomers in the copolymers was studied by statistical method based on the average reactivity ratios obtained by EK-T method.

홍삼 Ext 수용액의 살균과 저장 중 성분의 변화와 생성된 침전물의 이화학적 특성 (Changes in Chemical Components of Red Ginseng Extract Solution and Physicochemical Properties of Precipitates Formed During Pterilization and Storage)

  • 김나미;이종태;양재원
    • Journal of Ginseng Research
    • /
    • 제20권1호
    • /
    • pp.54-59
    • /
    • 1996
  • Red Ginseng extracts sol'n was sterilized at 85f for 20 mins and/or stored at 4$0^{\circ}C$ for 6 months and centrifuged for 20 mins at 8,500xg in order to investigate the changes in chemical components of supernatants and the properties of precipitates. Contents of crude saponin and ginsenoside-$Rb_1$, -$Rg_1$, -Re were partially decreased during heating and storage. Starch contents were decreased from 26.81% in red ginseng extracts to 17.50-8.81% in supernatants, whereas free sugar contents were increased from 15.50% to 20.29~21.35% by heating and storage. The contents of protein and minerals in supernatants were decreased, but acidic polysaccharides and polyphenol compounds were not changed. pH values of supernatants and precipitates were decreased. The absorbances of brown color precursor and brown pigment in precipitates, detected at 285 nm and 440 nm were remarkably increased. The Overa11 data suggest that precipitates in red ginseng extracts sol'n formed during steilization and storage are provably the brown pigments resulting from Maillard reaction of amino compounds with reducing sugar which could be released from starch and protein matrix and $Cu^+$, $Ca^{2+}$ and $Fe^{3+}$ ions are implicated with the reaction incorporated.

  • PDF

유성오염의 세척성에 관한 연구(제3보) -액수형성에 의한 액체유성오염의 세척성- (Studies on the Detergency of Oily Soils (Part III) -Detergency of Liquid Oily Soils by the Formation of Liquid Crystal-)

  • 김영희;정두진
    • 한국의류학회지
    • /
    • 제19권3호
    • /
    • pp.425-425
    • /
    • 1995
  • The interaction and detergency between liquid oily soil and surfactant solution were studied by the mechanism of formation of liquid crestal(LC). Samples used were triolein as a triglyceride, oleic acid as a free fatty acid and sodium dodgily sulfate (SDS) as a surfactant. The results were as follows: In the phase diagram of SDS/oil/Water system, the area of liquid crystalline phase region were in the order of SDS/trillion/water< SDS/oleic acid/water< SDS/mixture of trillion and oleic acid/water. In the system of oleic acid alone or mixture of trillion and oleic acid contacted with SDS solution, the LC phase was formed right after or after some time with SDS concentration. But in a case of trillion alone, the LC phase was not formed although the concentration of the SDS solution was relatively high. The detergency of model oily soils were seldom changed with temperature, and the detergency of oleic acid was very high compared to that of the trillion. The detergency of mixed soil was improved with the increase of the ratio of oleic acid in the mixture.

유성오염의 세척성에 관한 연구(제3보) -액수형성에 의한 액체유성오염의 세척성- (Studies on the Detergency of Oily Soils (Part III) -Detergency of Liquid Oily Soils by the Formation of Liquid Crystal-)

  • 김영희;정두진
    • 한국의류학회지
    • /
    • 제19권3호
    • /
    • pp.426-433
    • /
    • 1995
  • The interaction and detergency between liquid oily soil and surfactant solution were studied by the mechanism of formation of liquid crestal(LC). Samples used were triolein as a triglyceride, oleic acid as a free fatty acid and sodium dodgily sulfate (SDS) as a surfactant. The results were as follows: In the phase diagram of SDS/oil/Water system, the area of liquid crystalline phase region were in the order of SDS/trillion/water< SDS/oleic acid/water< SDS/mixture of trillion and oleic acid/water. In the system of oleic acid alone or mixture of trillion and oleic acid contacted with SDS solution, the LC phase was formed right after or after some time with SDS concentration. But in a case of trillion alone, the LC phase was not formed although the concentration of the SDS solution was relatively high. The detergency of model oily soils were seldom changed with temperature, and the detergency of oleic acid was very high compared to that of the trillion. The detergency of mixed soil was improved with the increase of the ratio of oleic acid in the mixture.

  • PDF