• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.104-117
• /
• 1991

When a body starts to move, the flow near the intersection point between a body and a free surface changes violently and rapidly in a very short initial time interval. This flow phenomena must be investigated whenever one treats the interaction between a body and a fluid, such as the motion of a floating body, sloshing in a tank, wave maker problem, entry of a body into a fluid etc.. Until Roberts(1987), it was widely accepted that a singularity exists at the intersection point. However, he showed that the singularity does not exist if a body moves non-impulsively. In this paper, an analytical solution cosistent for the case of impulsive motion of a body is obtained by including the effect of surface tension. From the characteristics of the newly obtained solution, a critical value associated with an oscillating phenomenon is found, and further more, it is shown that the oscillating phenomenon does not appear in the region where the distance form the intersection point is less than this critical value.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.5
• /
• pp.642-648
• /
• 1999

The digestive tract of the black sea bream, Acanthopagrus schlegeli is composed of esophagus, stomach, intestine, anus and four or five pyloric caeca. Pyloric caecum is a blind sac in shape and originated from pyloric portion of the stomach. Relative length of But (RLG), that is length of digestive tract to standard length, is 1.04 (n=10). Histological layer of the digestive tract is composed of serous membrane, muscular layer, undeveloped submucosal layer and mucosal layer. The mucosal folds of the esophagus are regular branched form, Esophageal muscularis mucosae is well-developed. Mucosal epithelial layer is composed of cuboidal or columnar epithelium and mucous secretory cell. Microvilli are absent in the free surface of mucosal epithelium. The mucosal folds of the stomach are regular unbranched form. The stomach has a well-developed muscular layer and muscularis mucosae. Microvilli are present in the free surface of mucosal surface epithelium. The fundic portion of the stomach have a well-developed gastric gland and more numerous secretory granules than the other parts. The mucosal folds of the pyloric caeca and the intestine are irregular branched form, Intestine is divided into the anterior, mid and posterior intestines with length of mucosal folds and histological features, Posterior intestine has a more developed striated border and goblet cells than the other parts. Mid intestine has a more abundant absorptive cells than the other parts in the intestine and pyloric caeca.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.157-157
• /
• 2022

Plants being sessile are prone to various abiotic challenges, including salinity. Plants generally cope with salt stress by regulating their endogenous NO levels. NO exogenously applied in various forms also successfully impedes the salt stress, but its small size, short half life, and high volatility rate hamper its application in agriculture. NO application via CS as a nanocarrier is an alternate option to ensure the optimal kinetic release of NO for a long period compared to the free NO form. Herein, we synthesized and characterized GSNO-CS NP by ionic gelation of TPP with CS and then reacting with GSH, followed by reaction with NaNO₂ suspension. The synthesized NPs were characterized using non-destructive analytical techniques such as DLS, FTIR, and SEM to ensure their synthesis and surface morphology. NO-release profile confirmed optimal kinetic NO release for 24 h from NO-CS NP as compared to free NO form. The efficiency of NO-CS NP was checked on Arabidopsis plants under salinity stress by gauging the morphological, physiological, and enzymatic antioxidant system and SOS pathway gene expression levels. Overall, the results revealed that NO-CS NP successfully mitigates salinity stress compared to free GSNO. Concluding, the findings provide sufficient experimental evidence for the application of nanotechnology to enhance NO delivery, thus inducing more benefits for the plants under stress conditions by mitigating the deleterious impacts of salt stress on the morphological and physiological status of the plants, and regulating the ions exchange by overexpression of SOS pathway candidate genes.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.9
• /
• pp.89-99
• /
• 2019

In the representation of buildings with continuous changes in the curved shape of the surface, countless plans or sections are required, or none of the traditional drawings can explain the geometry of it. In other words, in no case can an ordinary drawing achieve the efficient and clear communication capability which is inherent function of the drawings. As a result, the current architects are introducing their own way of drawing technique which is developed in accordance with a specific curved shape, construction method or company resources, but this is not what can be applied to other cases because it has not been ever shared or agreed in the industry. In this process, the drawing or construction of curved building has been recognized as the exclusive property of a specific expert, or the design and construction without the in-depth understanding of the technology have resulted in the appearance of poor buildings. Therefore, this study aims to present an elements and method that can convey shape information more effectively and clearly in the drawing representation of non-linear buildings and, thus, contributes to lowering the barriers to entry into the field by providing the information to be easily applied to related projects. In order to attain this goal, the drawings of recently completed projects of free form building are analyzed to reveal the method used to effectively express the shape information of the building and to derive new drawing elements that have not been applied to the existing drawings.

• Journal of the Korea Furniture Society
• /
• v.14 no.2
• /
• pp.1-12
• /
• 2003

This study was carried out to determine the mechanical and physical properties of particle boards glued with condensed tannin (Wattle Tannin) powder that was single-molecule phenolic compounds like powdered phenolic resin. Our findings are; 1) It is necessary to spray water on the chip surfaces for effective application of powdered -form tannin resin. It shows that the best and optimum mat moisture increase is 14% of water spray on the surface of chips for developing PB properties. 2) In general, for both liquid and powdered tannin adhesives, their physical and mechanical properties has been proportional to the increase of resin level. But, the most efficient addition ratio is 16% of resin on dry basis. Specially, it is found that the resin level influences on the amount of free formaldehyde emission. The higher the resin level is, the lower the emission is. These phenomena seem to result from the increase of hexamine or formaline in the adhesives used as a hardener, that reduce the free-formaldehyde amount by reaction of tannin of poly-molecule and water. 3) The optimum condition for manufacturing PBs is the condition of hexamine of 5% and formaline of 6% in mechanical and physical properties. Hexamine is superior to formaline in mechanical and physical properties along with the control of the free formaldehyde emission amount. The result of NaOH's addition is insignificant in all experiments of both mechanical and physical properties.

• Geomechanics and Engineering
• /
• v.18 no.6
• /
• pp.605-614
• /
• 2019

The present paper seeks to investigate propagation and reflection of waves at free surfaces of homogeneous, anisotropic and rotating micropolar fibre-reinforced medium with voids. It has been observed that, in particular when P-wave is incident on the free surface, there exist four coupled reflected plane waves traveling in the medium; quasi-longitudinal displacement (qLD) wave, quasi-transverse displacement (qTD) wave, quasi-transverse microrotational wave and a wave due to voids. Normal mode Analysis usually called harmonic solution method is adopted in concomitant with Snell's laws and appropriate boundary conditions in determination of solution to the micropolar fibre reinforced modelled problem. Amplitude ratios which correspond to reflected waves in vertical and horizontal components are presented analytically. Also, the Reflection Coefficients are presented using numerical simulated results in graphical form for a particular chosen material by the help of Mathematica software. We observed that the micropolar fibre-reinforced, voids and rotational parameters have various degrees of effects to the modulation, propagation and reflection of waves in the medium. The study would have impact to micropolar fibre-reinforecd rotational-acoustic machination fields and future works about behavior of seismic waves.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.4
• /
• pp.658-665
• /
• 2012

Micro-EDM is widely used in metallic pattern, electronics, nuclear power and industry in the form of precision process. The improvement of Electro Discharge Machining has been on a steady progress since $19^{th}$ century. The technology has overcome the limits of the traditional precision process, enabling micro-EDM, micro electrolytic machining, micro drilling, micro punching and laser beam machining, which create versatile products with smaller sizes. What have been known about the major feature of Micro-EDM is high thermal energy so that their products are free from the hardness of their products as long as they are electrical conductor. However, each metal is suspected to have different features and natures even if they are created through the same procedure. In this thesis, the methodology of Micro-EDM and how to categorize them are explained. Also, the nature of the examined materials with surface shape and surface roughnes are analyzed. The results of the experiments are expected to understand surface roughness and workability of other materials for Micro-EDM.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.5
• /
• pp.375-380
• /
• 2014

To enhance biocompatibility between the orthopedic implant stem and obsteoblast cells, bone-forming cells, micro-size holes are patterned in Ti plate surface. Initially, the house built laser power stabilization system is applied to the laser micro patterning machine to convince repeatable result. Various pulse widths are irradiated Ti plate and relationship between diameters of patterned holes and pulsed width is derived. Effect of multi pulse is observed and optimal pulse number is considered to avoid heat affected zone. After MG-63 osbeoblast cells are cultured, micro patterned Ti plates are compared with control plates. In SEM image, cells are well aligned and aggregation is observed in both 60, and $100{\mu}m$ patterned plates. Finally, free form surface stem model is prepared to test micro hole patterning.

• Journal of the Korea Computer Graphics Society
• /
• v.13 no.1
• /
• pp.1-6
• /
• 2007

Although free-form surfaces can represent smooth shapes with only a few control points contrary to polygonal meshes, graphics hardware does not support surface rendering currently. Since modern programmable graphics pipeline can be used to accelerate various kinds of existing graphics algorithms, this paper presents a method that utilizes the graphics processing unit (GPU) to render blending surfaces with arbitrary topology fast. Surface parameters sampled on the control mesh and geometric data for local surfaces are sent to the graphics pipeline, and then the vertex processor evaluates the surface positions and normals with these data. This method can achieve very high performance rather than CPU-based rendering.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.3
• /
• pp.161-167
• /
• 1993

This paper deals with a new method for the machining of a die cavity defined by sculptured surfaces. In machining die cavities or pockets, process planners have been faced with some troulbes. One of the troubles ius to rebove a great deal of material within a given boundary while avoiding cutter interference. Cutter interference is a ciritical problem in NC machining of a die cavity. Even though this cavity machining has been implemented in many CAM systems, most of them can handle limited shapes of cavities or pockets. In this paper, a procedure has been developed to machine die cavity or pocket of a sculptured surface. The offset surfaces of the part surfaces and boundary surfaces are determined to calculate the intersection curves. These intersection curves form a FACE on the part surface, and the interference free tool pathe is generated by eliminating the points outside the FACE when computing the cutter contact (CC) data. Additionally, the cutter location (CL) data obtained from the CC data convert to an NC data. The NC data generated through this algorithm are verified on the CINCINNATI milling machine. A propotype die cavity machining system has been implemented in FORTRAN language and FIGARO graphics library on IRIS workstation.