• Transactions of Materials Processing
• /
• v.28 no.5
• /
• pp.257-265
• /
• 2019

Multi-axial forging (MAF), a severe plastic deformation technique, is known to be difficult to obtain materials with homogeneous microstructures. Recently, multi-axial diagonal forging (MADF) process has been developed to solve this problem. In this study, in order to compare the microstructural and mechanical homogeneities of the MAFed and MADFed samples, oxygen-free copper (OFC) cubes measuring 25 mm in length were deformed through MAF and MADF processes and the average grain size and hardness were measured at the edge, face, and center regions of the samples. In the MAFed samples, ultrafine grains were formed at the center region, but a considerable amount of coarse grains remain at the face region. Therefore, the MAFed samples showed a high inhomogeneity in regards to grain size and hardness. On the contrary, in the case of the MADFed sample, the grain sizes at the edge, face, and center regions were similar and the hardness in all the regions are almost similar. This indicates that the MADFed sample has a homogeneous microstructure and uniform mechanical properties, which can be attributed to the homogeneous distribution of the effective strain throughout the material. The results of this study suggests that the MADF is a suitable process in the fabrication of high-strength copper materials with a homogeneous and ultrafine grain structure.

• Progress in Superconductivity and Cryogenics
• /
• v.23 no.2
• /
• pp.6-9
• /
• 2021

Heterostructures fabricated by various combinations of van der Waals (vdW) materials enable us to investigate disorder-free physical properties and realize novel functional devices. Superconducting vdW junctions have attracted a lot of attention because of its simple structure without a barrier layer. In superconducting vdW junction, without extra fabrication effort, a natural barrier can be formed, whose character is sensitive to distance and angle of lattice between two superconducting vdW materials. Using high-quality single crystals and the dry transfer technique, we fabricated the vertically stacked NbSe₂/NbSe₂ and FeSe/FeSe vdW junctions and investigated their Josephson junction properties. We found that in the FeSe junctions, Josephson coupling is extremely sensitive to the fabrication conditions, in contrast to the NbSe₂ junctions. We attributed this distinct character of the FeSe junctions to surface instability and small Fermi surface of FeSe.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.222-222
• /
• 2012

Metal oxide gas sensors based on semiconductor type have attracted a great deal of attention due to their low cost, flexible production and simple usability. However, most works have been focused on n-type oxides, while the characteristics of p-type oxide gas sensors have been barely studied. An investigation on p-type oxides is very important in that the use of them makes possible the novel sensors such as p-n diode and tandem devices. Monoclinic cupric oxide (CuO) is p-type semiconductor with narrow band gap (~1.2 eV). This is composed of abundant, nontoxic elements on earth, and thus low-cost, environment-friendly devices can be realized. However, gas sensing properties of neat CuO were rarely explored and the mechanism still remains unclear. In this work, the neat CuO layers with highly ordered mesoporous structures were prepared by a template-free, one-pot solution-based method using novel ink solutions, formulated with copper formate tetrahydrate, hexylamine and ethyl cellulose. The shear viscosity of the formulated solutions was 5.79 Pa s at a shear rate of 1 s-1. The solutions were coated on SiO2/Si substrates by spin-coating (ink) and calcined for 1 h at the temperature of $200{\sim}600^{\circ}C$ in air. The surface and cross-sectional morphologies of the formed CuO layers were observed by a focused ion beam scanning electron microscopy (FIB-SEM) and porosity was determined by image analysis using simple computer-programming. XRD analysis showed phase evolutions of the layers, depending on the calcination temperature, and thermal decompositions of the neat precursor and the formulated ink were investigated by TGA and DSC. As a result, the formation of the porous structures was attributed to the vaporization of ethyl cellulose contained in the solutions. Mesoporous CuO, formed with the ink solution, consisted of grains and pores with nano-meter size. All of them were strongly dependent on calcination temperature. Sensing properties toward H2 and C2H5OH gases were examined as a function of operating temperature. High and fast responses toward H2 and C2H5OH gases were discussed in terms of crystallinity, nonstoichiometry and morphological factors such as porosity, grain size and surface-to-volume ratio. To our knowledge, the responses toward H2 and C2H5OH gases of these CuO gas sensors are comparable to previously reported values.

• Journal of Powder Materials
• /
• v.9 no.6
• /
• pp.394-408
• /
• 2002

Nanostructured high strength metastable Al-, Mg- and Ti-based alloys containing different amorphous, quasicrystalline and nanocrystalline phases are synthesized by non-equilibrium processing techniques. Such alloys can be prepared by quenching from the melt or by powder metallurgy techniques. This paper focuses on one hand on mechanically alloyed and ball milled powders containing different volume fractions of amorphous or nano-(quasi)crystalline phases, consolidated bulk specimens and, on the other hand. on cast specimens containing different constituent phases with different length-scale. As one example. $Mg_{55}Y_{15}Cu_{30}$- based metallic glass matrix composites are produced by mechanical alloying of elemental powder mixtures containing up to 30 vol.% $Y_2O_3$ particles. The comparison with the particle-free metallic glass reveals that the nanosized second phase oxide particles do not significantly affect the glass-forming ability upon mechanical alloying despite some limited particle dissolution. A supercooled liquid region with an extension of about 50 K can be maintained in the presence of the oxides. The distinct viscosity decrease in the supercooled liquid regime allows to consolidate the powders into bulk samples by uniaxial hot pressing. The $Y_2O_3$ additions increase the mechanical strength of the composites compared to the $Mg_{55}Y_{15}Cu_{30}$ metallic glass. The second example deals with Al-Mn-Ce and Al-Cu-Fe composites with quasicrystalline particles as reinforcements, which are prepared by quenching from the melt and by powder metallurgy. $Al_{98-x}Mn_xCe_2$ (x =5,6,7) melt-spun ribbons containing a major quasicrystalline phase coexisting with an Al-matrix on a nanometer scale are pulverized by ball milling. The powders are consolidated by hot extrusion. Grain growth during consolidation causes the formation of a micrometer-scale microstructure. Mechanical alloying of $Al_{63}Cu_{25}Fe_{12}$ leads to single-phase quasicrystalline powders. which are blended with different volume fractions of pure Al-powder and hot extruded forming $Al_{100-x}$$(Al_{0.63}Cu_{0.25}Fe_{0.12})_x$ (x = 40,50,60,80) micrometer-scale composites. Compression test data reveal a high yield strength of ${\sigma}_y{\geq}$700 MPa and a ductility of ${\varepsilon}_{pl}{\geq}$5% for than the Al-Mn-Ce bulk samples. The strength level of the Al-Cu-Fe alloys is ${\sigma}_y{\leq}$550 MPa significantly lower. By the addition of different amounts of aluminum, the mechanical properties can be tuned to a wide range. Finally, a bulk metallic glass-forming Ti-Cu-Ni-Sn alloy with in situ formed composite microstructure prepared by both centrifugal and injection casting presents more than 6% plastic strain under compressive stress at room temperature. The in situ formed composite contains dendritic hcp Ti solid solution precipitates and a few $Ti_3Sn,\;{\beta}$-(Cu, Sn) grains dispersed in a glassy matrix. The composite micro- structure can avoid the development of the highly localized shear bands typical for the room temperature defor-mation of monolithic glasses. Instead, widely developed shear bands with evident protuberance are observed. resulting in significant yielding and homogeneous plastic deformation over the entire sample.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.2
• /
• pp.69-73
• /
• 2018

Crystal growth of ${\alpha}-Fe_2O_3$ nanosized particles of 80~90 nm in size, which were hydrothermally prepared from 0.03 M $FeCl_3$ solution at $100^{\circ}C$, was investigated in Pb-containing and Pb-free frit. By heating ${\alpha}-Fe_2O_3$ nanosized particles in two frits at $800^{\circ}C$, the average diameter of particles in frits was increased to 200~210 nm and 150~160 nm, respectively, and the crystal growth due to the aggregation and sintering of several ${\alpha}-Fe_2O_3$ particles was observed. Formation ratios of larger particles over 100 nm in diameter were 54 % in Pb-free frit and 85 % in Pb-containing frit. After heating ${\alpha}-Fe_2O_3$ particles in frits at $800^{\circ}C$, 7~9 nm in average diameter of pores were formed in particles. Theses pores were derived from the porous structure of original ${\alpha}-Fe_2O_3$ particles and confined in particles during sintering.

• Cartoon and Animation Studies
• /
• s.49
• /
• pp.589-610
• /
• 2017

This study aimed at examining the music world of the composer Muczynski, who played an important and meaningful role in the various experimental trends of music which began to appear in the early $20^{th}$ century, and his works, thereby understanding his relationship with the development of music of various genres today. In the study, his pieces of piano music among his works, which formed the basis for his music, were analyzed. The study examined stylistic characteristics, that is techniques of various types including form, melody, harmony, tonality, rhythm and structure, and introduced the composer's growth in terms of music and philosophical background. Muczynski, the composer who showed the characteristics of neoclassicism, neoromanticism and neobaroque in contrast to the various forms of the $20^{th}$ music, namely music of free styles including atonal music, twelve-tone technique, avant-garde music and electronic music, used traditional forms. However, the characteristics of his works are very free. In addition, in the 1960s, he participated in the production of documentary movie music, creating very creative and sensational music. Muczynski's music has the features of tonality and shows neoclassic and neoromantic features including economical idea, lyrical melody, bitonality and nine-note scale. His music, therefore, is being evaluated as very creative and valuable and is largely significant in that it has provided a good basis for the development of modern movie music and jazz music today.

• Korean Journal of Plant Tissue Culture
• /
• v.25 no.2
• /
• pp.135-139
• /
• 1998

Reciprocal interspecific hybrids between N. glauca(2n=24) and N. langsdorffii(2n=18) were obtained by intercrossing. One hundred percent of F$_1$ seeds was produced from intercrossing of N. glauca $\times$ N. langsdorffii, whereas the frequency of F$_1$ hybrid seed formation from N. langsdorffii $\times$ N. glauca was very low. However, all the hybrid seeds were germinated well and then grown to normal plantlets. All the plants of F$_1$ hybrids have chromosome number of interspecific hybrids (2n=21). From observation of morphological characteristic, the structure of petrol, leaf, flower, and the morphology of pollen have characteristics of F1 hybrid. Spontaneous tumors (genetic tumor) were formed from each F$_1$ hybrid; the genetic tumor arose at the reproductive phase when the maternal type of F$_1$ hybrid came from N. glauca, while the genetic tumor arose only after reproductive phase when the maternal type of F$_1$ hybrid came from N. langsdorffii. The genetic tumor actively proliferated on hormone-free medium and produced numerous teratoma shoots. In addition, normal leaf or stem explants of F$_1$ hybrid produced calli on hormone-free medium after 15 days of culture, the calli produced new numerous teratoma shoots after 30 days. The frequency of teratoma shoot formation from rnterspecific hybrid was higher in the N. glauca $\times$ N. langsdorffii than in the N. langsdorffii $\times$ N. glauca. Root development from the teratoma shoots was hardly obtained. Teratoma shoots without roots in vitro can form genetic tumor at the vegetative growth phase after tissue culture.

• Applied Microscopy
• /
• v.25 no.2
• /
• pp.39-52
• /
• 1995

Pinealocytes in the lower vertebrate are known to have photoreceptive function. These photoreceptor cells have been characterized morphologically in various species of lower vertebrates. No such ultrastructural studies, however, were reported in fresh water turtle. The purpose of this study is to characterize the pinealocytes and the phylogenetic evoluton of these cells is discussed in terms of functional analogy. I. Light microscopy: The pineal body was divided into incomplete lobules by connective tissue septa containing blood vessels, and parenchymal cells were arranged as irregular cords or follicular pattern. In the lobules, glandular lumina were present and contained often densely stained materials. II. Electron microscopy: The pineal parenchyma had three categories of cells: photoreceptor cells, supportive cells and nerve cells. The photoreceptor cells had darker cytoplasm compared to the supportive cells, and the enlarged apical cytoplasm(inner segment) containing abundant mitochondria and dense cored vescles protruded into the glandular lumen in which lamellar membrane stacks(outer segment), dense membranous materials, and cilia were present. Some of these lamellated membrane stacks appeared to be dege-nerating while others were apparently newly formed. Constricted neck portion of the photoreceptor cells contained longitudinally arranged abundant microtubules. centrioles and cross-striated rootlets. Cell body had well developed Golgi apparatus, abundant mitochondria, dense granules($0.5{\sim}1{\mu}m$), dense cored vesicles($70{\sim}100nm$), and rough endoplasmic reticulum occasionally with dense material within its cisterna. Basal portion of the photoreceptor cells had basal processes often with synaptic ribbons, which terminate in the complicated zone of cellular and neuronal processes. Synatpic ribbons often made contact with the nerve processes and the cell processes of neighboring cells. In some instances, these ribbons were noted free within the basal process and were also present at the basal cell mem-brane facing the basal lamina. Obvious nerve endings with clear and dense cored vesicles were observed among the parenchymal cells. Photoreceptor cells of the snapping turtle pineal body were generally similar in fine structure to those of other lower verterbrates reported previously, and suggested to have both photoreceptive and secretory functions which were modulated by pinealofugal and pinealopedal nerves. The supportive cells were characterized by having large dense granules($0.3{\sim}1{\mu}m$), abundant ribosomes, well developed Golgi apparatus and rough endoplasmic reticulum. These cells were furnished with microvilli on the luminal cell surfaces, and often had centrioles, striated rootlets, abundant filaments especially around the nucleus, and scattered microtubules. Some supportive cells had cell body close to the lumen and extended a long process reaching to basal lamina, which appeared to be a glial cell. Nerve cells within the parenchyma were difficult to identify, but some large cells located basally were suspected to be nerve cells, since they had synaptic ribbon contact with photoreceptor cells.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.11
• /
• pp.71-81
• /
• 2021

The purpose of this study is liquefaction phenomenon was simulated using the 1g shaking table test. Analysis of liquefaction and Re-liquefaction behavior according to the ground conditions was analyzed when an embankment exists above the ground. The soil used in the experiment was silica sand and the ground composition was a liquefied layer of 50cm (Case 1), a non-liquefied layer of 17.5cm and a liquefied layer of 32.5cm (Case 2). The embankment was formed by fixing the height of 10cm and the slope of the slope at a ratio of 1:1.8. For seismic waves, excitation of a 5Hz sine wave was performed for 8 seconds, and a total of 5 case excitations were performed. In Case 1, it was confirmed that liquefaction occurred at all depths during the first vibration excitation at the free-field and that liquefaction did not occur at all depths except 5cm at the third vibration excitation. At the center of the embankment, liquefaction occurred up to a depth of 20cm during the first vibration excitation, and it was confirmed that liquefaction did not occur at all depths except for a depth of 5cm during the second vibration excitation.

• Journal of the Korean association of regional geographers
• /
• v.4 no.2
• /
• pp.49-64
• /
• 1998

Bing-gye valley(Kyongbuk Province, South Korea) is well known as a tourist attraction because of its meteorologic characteristics that show subzero temperature during midsummer. Also, there are some interesting geomorphic features in the valley area. Therefore, the valley is worth researching in geomorphology field. The aim of this paper is to achieve two purposes. These are to clarify geomorphic features on talus within Bing-gye valley area, and to infer the origin of Bing-gye valley. The main results are summarized as follows. 1) The formation of Bing-gye valley It would be possible to infer the following two ideas regarding the formation of Bing-gye valley. One is that the valley was formed by differential erosion of stream along fault line, and the other is that the rate of upheaval comparatively exceeded the rate of stream erosion. Especially, the latter may be associated with the fact that the width of the valley is much narrow. Judging that the fact the width of the valley is much narrow, compared with one of its upper or lower valley, it is inferred that Bing-gye valley is transverse valley. 2) The geomorphic features of talus (1) Pattern It seems to be true that the removal of matrix(finer materials) by the running water beneath the surface can result in partly collapse hollows. Taluses are tongue-shaped or cone-shaped in appearance. They are $120{\sim}200m$ in length, $30{\sim}40m$ in maximum width. and $32{\sim}33^{\circ}$ in mean slope gradient. The component blocks are mostly homogeneous in size and shape(angular), which reflect highly jointed free face produced by frost action under periglacial environment. (2) Origin On the basis of previous studies, the type of the talus is classified into rock fall talus. When considered in conjunction with the degrees of both weathering of blocks and hardness of blocks, it can be explained that the talus was formed under periglacial environment in pleistocene time. (3) The inner structure of block accumulation I recognize a three-layered structure in the talus as follows: (a) superficial layer; debris with openwork texture at the surface, 1.3m thick. (b) intermediate layer: small debris(about 5cm in diameter) with fine matrix(including humic soil), 70cm thick. (c) basal layer: over 2m beneath surface, almost pure soil horizon without debris (4) The stage of landform development Most of the blocks are now covered with lichen, and/or a mantle of weathering. It is believed that downslope movement by talus creep well explains the formation of concave slope of the talus. There is no evidence of present motion in the deposit. Judging from above-mentioned facts, the talus of this study area appears to be inactive and fossil landform.