• 설비공학논문집
• /
• 제11권6호
• /
• pp.716-724
• /
• 1999

In co-orbiting scroll compressor, the two scroll members are to orbit with independent radii, producing a relative orbit motion between them. One scroll member is driven by the crank mechanism while the motion of the other member is determined by geometrical constraints and reacting forces. This paper presents an analytical study on the performance of a co-orbiting scroll compressor. The following results have been obtained: Radial contact force between the scroll wraps is virtually free from the centrifugal force of the orbiting scroll member. The frictional losses are somewhat increased due to the complicated drive mechanism, yielding to a little lower EER compared to conventional radially compliant scroll compressors .

• 대한수학회보
• /
• 제53권6호
• /
• pp.1707-1714
• /
• 2016

Let $C{\subset}{\mathbb{P}}^r$ be a nondegenerate projective curve of degree d > r + 1 and of maximal regularity. Such curves are always contained in the threefold scroll S(0, 0, r - 2). Also some of such curves are even contained in a rational normal surface scroll. In this paper we study the minimal free resolution of the homogeneous coordinate ring of C in the case where $d{\leq}2r-2$ and C is contained in a rational normal surface scroll. Our main result provides all the graded Betti numbers of C explicitly.

• 설비공학논문집
• /
• 제5권4호
• /
• pp.306-317
• /
• 1993

In this study, a performance comparison of scroll compressor for various refrigerants(CFC-12, HCFC-22 and HFC-134a) has been numerically carried out. The thermodynamic properties have been calculated by using the recent experimental equations and the performance has been investigated qualitatively at the same geometric specifications and operating conditions of scroll compressor. The results are as follows; HFC-134a has the highest compression ratio of 5.40. The mass flow rate of HCFC-22, which affects the cooling capacity of refrigerant system, is higher than that of other refrigerants. HFC-134a has the highest adiabatic efficiency in comparison with CFC-12 and HCFC-22.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2002년도 제22회 학술발표회 초록집
• /
• pp.32-32
• /
• 2002

• Journal of Korean Vacuum Science & Technology
• /
• 제6권4호
• /
• pp.158-161
• /
• 2002

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.242-247
• /
• 2000

In this study, the Rayleigh's energy method and the Rayleigh-Ritz method on the basis of Flugge's shell theory was used to analyze the dynamic characteristics of the scroll compressor housing with clamped boundary condition. The frequencies and mode shapes from theoretical calculation were compared with those of commercial finite element code, ANSYS. In order to validate the theory, modal test was also performed by impact test and FFT analysis.

• 설비공학논문집
• /
• 제23권12호
• /
• pp.776-781
• /
• 2011

The rapid increases in global energy demand and global warming need renewable energy sources such as solar thermal energy, biomass energy and waste heat. A ORC-based micro-CHP system(< 10 kWe) is one of the effective means to use renewable energy and solve energy problems because of its compactness, flexibilities and lower cost compared to other systems. The most important core components of the ORC is the expander which has a strong effect on the cycle efficiency. In the range of power output from 1 to 10 kW, the scroll expander is a good choice due to its performance and reliability. In this study, we have carried out an experimental study on an ORC equipped with oil-free scroll expander working with refrigerant R134a. We have measured power output and thermal efficiencies of the ORC and analyzed correlation between volumetric efficiencies of the expander and thermal efficiencies of the ORC.

• 한국가스학회지
• /
• 제20권5호
• /
• pp.50-56
• /
• 2016

본 연구에서는 개방형 무급유식 스크롤 압축기를 개조하여 유기랭킨사이클(ORC)용 소형의 스크롤 팽창기를 설계 및 제작하였다. 팽창기 케이스는 직육면체 형태로 총 체적은 $0.0394m^3$이며, 성능특성 연구를 위해 작동유체로 R245fa를 사용하는 ORC 사이클을 구축하고, 다양한 팽창기 입구압력 및 회전속도 조건에서 성능시험을 수행하였다. 성능시험에서 획득한 열역학적 물성값을 스크롤 팽창기의 semi-empirical 시뮬레이션 모델에 적용해 파라미터를 계산하고, 열역학적 분석을 통해 계산한 실험값과 시뮬레이션값의 비교를 수행하였다.

• East Asian mathematical journal
• /
• 제40권3호
• /
• pp.287-293
• /
• 2024

For a nondegenerate irreducible projective variety, it is a classical problem to describe its defining equations and the syzygies among them. In this paper, we precisely determine a minimal generating set and the minimal free resolution of defining ideals of some rational curves of maximal genus in ℙ³.

• 대한기계학회논문집B
• /
• 제37권10호
• /
• pp.919-926
• /
• 2013

본 연구에서는 소형 저온 유기랭킨사이클 시스템의 작동특성을 파악하기 위하여 R-245fa를 작동유체로 사용한 소형 ORC 발전 시스템을 설계 및 제작하였고, 다양한 저온의 열원온도에 대한 실험적 연구를 수행하였다. 저온 열원을 모사하기 위하여 최고 $150^{\circ}C$의 물을 공급할 수 있는 110 kW급의 전기저항 히터를 제작하였으며, 컨트롤러를 통해서 다양한 열원 온도 및 유량조건에 대한 실험이 가능하도록 구성하였다. 또한, 상용 공기용 스크롤 압축기를 이용하여 팽창기로 개조하고 동력계 및 동기식 모터와 직접 연결하였다. 로드뱅크 및 PI 제어방식을 사용하여 팽창기의 회전속도에 따른 동일 열원온도 조건에 대한 실험을 각각 수행하였으며, 소형 ORC 시스템의 성능에 영향을 미치는 다양한 인자들에 대하여 분석하고 논의하였다.