• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.19 no.2
• /
• pp.55-60
• /
• 2013

Background: The purpose of this study was to determine if there is a difference in activation of the rectus femoris, vastus medialis oblique, vastus lateralis, semitendinosus, and biceps femoris when performing normal free squat with standinding position and free squat with $30^{\circ}$ flexed hip joint. Methods: Electromyograph surface electrodes were placed on the rectus femoris, vastus medialis oblique, vastus lateralis, semitendinosus, and biceps femoris of 19 healthy college students. The participants performed standing bilateral squats and standing bilateral squats with $30^{\circ}$ flexed hip joint with EMG measures taken upon initiation of muscle activity as confirmed by an electronic goniometer. Participants completed one trial with the EMG time measurements on each type. Results: There was a significant difference between normal squats(standing squats) and normal squats with $30^{\circ}$ flexed hip joint. The normal squat exercise was statistically higer than normal squat exercise with $30^{\circ}$ flexed trunk except for semitendinosus and biceps femoris that shown slightly high. Conclusions: As a result of this study, there were increases of muscle activity in both ways. In particular, it may be more beneficial for knee joint stabilization to perform normal squat exercise with standing position relatively.

• Computers and Concrete
• /
• v.26 no.2
• /
• pp.161-173
• /
• 2020

Shear keys in precast concrete segmental bridges (PCSBs) are usually match-casting which is very labour intensive. In this research, an innovative match-casting-free construction was proposed by leaving small gap between the convex and the concave castellated shear keys in the joints of PCSBs. Specimen experiment, shear strength analysis and numerical simulation were conducted, investigating the loading performance of this new type of dry joints, the gap dry joints. Compared with match-casting joint specimens, it has been found from experiment that shear capacity of gap joint specimens significantly decreased ranging from 17.75% to 42.43% due to only partially constrained and contacted in case of gap dry joints. Through numerical simulation, the effects of bottom contacting location, the heights of the gap and the shear key base were analyzed to investigate strength reduction and methods to enhance shear capacity of gap joint specimens. Numerical results proved that shear capacity of gap dry joints under full contact condition was higher than that under partial contact. In addition, left contact destroyed the integrity of shear keys, resulting in significant strength reduction. Larger shear key base remarkably increased shear capacity of the gap joint. Experimental tests indicated that AASHTO provision underestimated shear capacity of the match-casting dry joint specimens, while the numerical results for the gap dry joint showed that AASHTO provision underestimated shear capacity of full contact specimens, but overestimated that of left contact specimens.

• IE interfaces
• /
• v.16 no.1
• /
• pp.85-93
• /
• 2003

The purposes of this study are to investigate perceived discomfort for static joint motions, and to propose rankings for the joint motions based on the perceived discomfort. The perceived discomfort was measured through an experiment using the free modulus method of the magnitude estimation, in which ten healthy college-age female students participated. The results showed that joints, joint motions and their levels significantly affected the perceived discomfort at $\alpha$=0.01, and that the interaction of joints and joint motion levels was also significant. Based on the experimental results, three rankings were proposed by joint and joint motions, by joints and by joint motions, which were very different from the existing ones. Especially, the proposed rankings were different from the males' published before in their order and magnitude. These rankings can be used as a valuable tool for better understanding potentially adverse effects of poor working postures in industrial sites, and as basic data for developing the postural classification scheme.

• Korean Journal of Applied Biomechanics
• /
• v.32 no.1
• /
• pp.24-30
• /
• 2022

Objective: The purpose of this study was to determine the factors of successful and unsuccessful movements through the analysis of kinematics and muscle activity of the Free Aerial Cartwheel on the balance beam. Method: Subjects (Age: 22.8 ± 2.4 yrs., Height: 158.7 ± 5.0 cm, Body mass: 54.1 ± 6.4 kg, Career: 13 ± 2.4 yrs.) who were currently active as female gymnasts participated in the study. They had no history of surgical treatment within 3 months. Subject criteria included more than 10 years of professional experience in college and professional level of gymnastics and the ability to conduct the Free Aerial Cartwheel on the Balance Beam. Each subject performed 10 times of Free Aerial Cartwheel on the balance beam. One successful trial and one unsuccessful trial (failure) among 10 trials were selected for the comparison. Results: It was found that longer time required in case of unsuccessful trial when performing the Free Aerial Cartwheel on the balance beam compared with successful trial. It is expected to be the result of movement in the last landing section (i.e. phase 5). In addition, it was found that the center of gravity of the body descends at a high speed to perform the jump (i.e. phase 2) in order to obtain a sufficient jumping height when the movement is successful while the knee joint is rapidly extended to perform a jump when movement fails. In the single landing section after the jump (i.e. phase 4), if the ankle joint rapidly dorsiflexed after take-off and the hip joint rapidly flexed, so landing was not successful. Conversely, in a successful landing movement, muscle activity of the biceps femoris was greatly activated resulting no shaking in the last landing section (i.e. phase 5). Conclusion: In order to succeed in this movement, it is necessary to perform a strong jump after rapidly descending the center of gravity of the body using the force of the biceps femoris muscle. Further improvement of the skills on the balance beam requires the analysis of the game-like situation with continuous research on kinematic and kinematic analysis of various techniques, jumps, turns, etc.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.2
• /
• pp.187-192
• /
• 2011

UBM(Under Bump Metallurgy) is very important for successful realization of Flip-Chip technology. In this study, it is investigated the interfacial reactions between various Sn-Ag solder alloys and Ni-P/Au UBM and Cu plate finish. It is also evaluated the shear strength by using the micro shear-punch test method for Sn-37Pb alloy, binary and ternary alloys of environment-friendly Pb-free solder alloys which are applied in the electronic packages. In terms of interfacial microstructure, the Pb-free solder joints have thicker IMCs than the Sn-Pb solder joints. The thickness of IMC is related to Reflow time. The IMC has been observed to grow with the increase in Reflow time. As a result of the shear test, in case of Max. shear strength, Pb-free solder showed the highest strength value and Sn-37Pb showed the lowest strength value 10 be generally condition of Reflow time.

• Archives of Reconstructive Microsurgery
• /
• v.7 no.2
• /
• pp.135-145
• /
• 1998

In 1980 Morrison and O'Brien reported their experiences about the reconstruction of amputated thumb using wrap-around neurovascular free flap from the great toe with a nonvascularized iliac bone graft. From then it has been considered to be a good reconstructive procedure for the amputated thumb, but it's indication has been limited distal to the metacarpophalangeal(MP) joint. We have performed 37 cases of wrap-around free flap from the great toe for the reconstruction of thumb amputated at distal or proximal to the MP joint and investigated their functional results according to the level of amputation. Level of amputation was distal to the MP joint in 25 cases and proximal to it in 12 cases. Pinching and grasping power, two point discrimination and the amount of opposition to the other fingers were compared to the uninjured hand. Pinching and grasping power were not significantly different according to the level of amputation but the amount of two point discrimination was significantly high in the cases amputated proximal to the MP joint. The opposition of reconstructed thumb to the other fingers was completely possible in all cases amputated distal to the MP joint. In 12 cases amputated proximal to the MP joint of the thumb, opposition was completely possible in 6 cases in which the iliac bone block was fixated in the position of $30^{\circ}$ flexion and $45^{\circ}$ internal rotation but in 6 cases in the fixation of $30^{\circ}$ flexion and $30^{\circ}$ internal rotation, the opposition of reconstructed thumb to the ring and little fingers were impossible in 5 cases and only to the little finger in 1 case. In this study, we concluded that even if amputation proximal to the MP joint, it is no more contraindication of the wrap-around free flap procedure for thumb reconstruction, however in these cases we recommend iliac bone block fixation in the position of $30^{\circ}$ flexion and $45^{\circ}$ infernal rotation for the better functional outcome.

• The Journal of Korean Physical Therapy
• /
• v.15 no.2
• /
• pp.12-18
• /
• 2003

Proprioception can be defined as a specialized variation of touch that encompasses the sensation of joint movement(kinesthesia) and joint position(static joint position sense). Several types of joint and muscular mechanoreceptors provide proprioceptive information for joint stability. Joint mechanoreceptors have been classified into four types based of activation characteristics : Ruffini endings, Pacinian corpuscles, Golgi tendon organlike endings, free nerve endings. The paper review the morphology, distrubution, function of mechanoreceptors in shoulder joint.

• Journal of the Ergonomics Society of Korea
• /
• v.21 no.1
• /
• pp.81-93
• /
• 2002

This study aims to provide joint angles of comfort for females, based on the psychophysical scaling method. Ten female subjects participated in the experiment for measuring perceived discomfort for varying joint motions. The subjects were instructed to maintain given joint motions for a minute, and to rate their perceived discomfort for the motions during a minute's rest by using the free modulus method of the magnitude estimation. Joint angles of comfort were calculated from the regression equations based on the experimental results, in which levels of joint motions were used as independent variables and perceived discomforts as dependent variables. The results showed that joint angles of comfort for the joint motions investigated were much smaller than full range of motions for corresponding joint motions. The ratios of joint angle of comfort to its range motion for the hip were found to be smallest of all joint motions dealt with in this study, and those for the neck were the largest. In addition, comfortable joint angles for females were much smaller than those for males. It is recommended that when designing or evaluating workplaces ergonomically, different comfortable joint angles should be applied according to workers' or population's gender.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.564-568
• /
• 1992

A neural optimization network is designed to solve the collsion-free inverse kinematics problem for redundant robot manipulators under the constraints of joint limits, maximum velocities and maximum accelerations. And the fuzzy rules are proposed to determine the weightings of neural optimization networks to avoid the collision between robot manipulator and obstacles. The inputs of fuzzy rules are the resultant distance, change of the distance and sum of the changes. And the output of fuzzy rules is defined as the capability of collision avoidance of joint differential motion. The weightings of neural optimization networks are adjusted according to the capability of collision avoidance of each joint. To show the validities of the proposed method computer simulation results are illustrated for the redundant robot with three degrees of freedom,

• Journal of Welding and Joining
• /
• v.18 no.6
• /
• pp.42-47
• /
• 2000

The object of this study is to estimate Sn-Ag-Bi-Ga solder alloy as a substitute for Sn-37Pb alloy. For Sn-Ag-Bi-Ga alloys, Ag, Bi and Ga contents are varied. (Ag : 1~5%, Ga : 3%, Bi : 3~6%) Comparing to Sn-37Pb alloy Sn-Ag-Bi-Ga alloys have wider melting temperature range up to max. $18.7^{\circ}C$. With increasing Ag, Bi contents, the wettability of the alloys increased up to max. 6.6 mN. The vickers hardness of the alloys was max. 46.4 Hv. The ultimate tensile stress of the alloys was max. 60.3 MPa and the elongation was max. 1.2%. The joint strength between circuit board and solder was max. 55.5 N and the joint strength between connector and solder was max. 176.1 N. There were no cracks in this alloys after thermal shock test.