• Korean Journal of Agricultural Science
• /
• v.8 no.1
• /
• pp.90-96
• /
• 1981

To design more efficient agricultural machinery, the accurately measuring system among many other factors is essential. A light-beam oscillographic recorder is generally used in measuring dynamic strain but it is not compatible with the extremely high speed measuring system such as 1,000 m/s, also is susceptable to damage due to vibration while using the system in field. The recorder used light sensitive paper for strip chart recording. The reading and analysis of data from the strip charts is very cumbersome, errorneous and time consuming. A microcomputer was interfaced with A/D converter, microcomputer program was developed for measuring, system calibration was done and the strain generated from a cantilever beam vibrator was measured. The results are summarized as follows. 1. Microcomputer program was developed to perform strain measuring of agricultural machine elements and could be controled freely the measuring intervals, no. of channels and no. of data. The maximum measuring speed was $62{\mu}s$. 2. Calibration the system was performed with triangle wave generated from a function generator and checked by an oscilloscope. The sampled data were processed using HP 3000 minicomputer of Chungnam National University computer center the graphical results were triangle same as input wave and so the system have been out of phase distorsion and amplitude distorsion. 3. The strain generated from a cantilever beam vibrator which has free vibration period of 0.019 second were measured by the system controlled to have l.0 ms of time interval and its computer output showing vibration curve which is well filted to theoretical value. 4. Using microcomputer on measuring the strain of agricultural machine elements could not only save analyzing time and recording papers but also get excellent adaptation to field experiment, especially in measurement requiring high speed and good precision.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.6
• /
• pp.36-45
• /
• 2011

Public open space(Gong-Gae-Gong-Ji) is an important part of the open-space system in an urban environment. Though part of the private sector, it has a significant public function as there are as always open to the free use of every citizen for rest and amenities. A field survey of the public open space of 71 major buildings was carried out to investigate the actual state of public open spaces in the city of Daegu. As a result of this investigation, several point of issues were discussed. In distribution by 'Gu', newly-emerging sub-centers of Daegu-City, such as Bug-Gu and Dalseo-Gu as well as downtown area have many public open spaces. By the use type of buildings, retail buildings such as shopping centers and SSM account for36.6%, business buildings21.1%, and residential and commercial complexes 15.5%, respectively. Location wise, the front areas accounted for the greatest amount(42.9%) with 1 in side area(20%), and 2 in the front/side area(20%), respectively. Degree of division was 1 spot type(45.7%), 2 division type(35.7%). The misuse of public open space for private use, such as shopping and parking lots, was26.6%. On the basis and analysis of the actual status, 6 improvement devices for public open spaces were suggested: 1) The improvement of the legal regulative system, 2) the establishment of design guidelines and strengthening of deliberation, 3) administrative and financial support, 4) periodic supervision and guidance, 5) installment of signs that shows the space is open for use to every citizen, and 6) the participation of citizens in management of public open space.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06a
• /
• pp.179-200
• /
• 1996

The intrinsic instabilities of fluid flow occurred in the melt of the Czochralski crystal growth system Czochralski method, asymmetric flow patterns and temperature profiles in the melt have been studied by many researchers. The idea that the non-symmetric structure of the growing equipment is responsible for the asymmetric profiles is usually accepted at the first time. However further researches revealed that some intrinsic instabilities not related to the non-symmetric equipment structure in the melt could also appear. Ristorcelli had pointed out that there are many possible causes of instabilities in the melt. The instabilities appears because of the coupling effects of fluid flow and temperature profiles in the melt. Among the instabilities, the B nard type instabilities with no or low crucible rotation rates are analyzed by the visualizing experiments using X-ray radiography and the 3-D numerical simulation in this study. The velocity profiles in the Silicon melt at different crucible rotation rates were measured using X-ray radiography method using tungsten tracers in the melt. The results showed that there exits two types of fluid flow mode. One is axisymmetric flow, the other is asymmetric flow. In the axisymmetric flow, the trajectory of the tracers show torus pattern. However, more exact measurement of the axisymmetrc case shows that this flow field has small non-axisymmetric components of the velocity. When fluid flow is asymmetric, the tracers show random motion from the fixed view point. On the other hand, when the observer rotates to the same velocity of the crucible, the trajectory of the tracer show a rotating motion, the center of the motion is not same the center of the melt. The temperature of a point in the melt were measured using thermocouples with different rotating rates. Measured temperatures oscillated. Such kind of oscillations are also measured by the other researchers. The behavior of temperature oscillations were quite different between at low rotations and at high rotations. Above experimental results means that the fluid flow and temperature profiles in the melt is not symmetric, and then the mode of the asymmetric is changed when rotation rates are changed. To compare with these experimental results, the fluid flow and temperature profiles at no rotation and 8 rpm of crucible rotation rates on the same size of crucible is calculated using a 3-dimensional numerical simulation. A finite different method is adopted for this simulation. 50×30×30 grids are used. The numerical simulation also showed that the velocity and flow profiles are changed when rotation rates change. Futhermore, the flow patterns and temperature profiles of both cases are not axisymmetric even though axisymmetric boundary conditions are used. Several cells appear at no rotation. The cells are formed by the unstable vertical temperature profiles (upper region is colder than lower part) beneath the free surface of the melt. When the temperature profile is combined with density difference (Rayleigh-B nard instability) or surface tension difference (Marangoni-B nard instability) on temperature, cell structures are naturally formed. Both sources of instabilities are coupled to the cell structures in the melt of the Czochralski process. With high rotation rates, the shape of the fluid field is changed to another type of asymmetric profile. Because of the velocity profile, isothermal lines on the plane vertical to the centerline change to elliptic. When the velocity profiles are plotted at the rotating view point, two vortices appear at the both sides of centerline. These vortices seem to be the main reason of the tracer behavior shown in the asymmetric velocity experiment. This profile is quite similar to the profiles created by the baroclinic instability on the rotating annulus. The temperature profiles obtained from the numerical calculations and Fourier transforms of it are quite similar to the results of the experiment. bove esults intend that at least two types of intrinsic instabilities can occur in the melt of Czochralski growing systems. Because the instabilities cause temperature fluctuations in the melt and near the crystal-melt interface, some defects may be generated by them. When the crucible size becomes large, the intensity of the instabilities should increase. Therefore, to produce large single crystals with good quality, the behavior of the intrinsic instabilities in the melt as well as the effects of the instabilities on the defects in the ingot should be studied. As one of the cause of the defects in the large diameter Silicon single crystal grown by the

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.12
• /
• pp.131-138
• /
• 2016

In this study, we tried to analyze the influence of ICM(Iodinated Contrast Media) in MR imaging compare to GBCA(Gadolinium Based Contrast Agent), and as this result we discussed whether resonable or not the protocol which is MRI scan after enhanced CT scan without proper time interval in clinical field. For this research, we assembled two phantoms. which one was iodine and another one was gadolinium. We did test two phantoms in conventional MRI scan which is T1, T2, T2 FLAIR and 3D angio. After that, quantitative analysis was progressed. The results of study were as follow : SSI(Saline's Signal Intensity) was shown as each sequences 175, 1231, 333, 37 [a.u] at iodine. and 1297, 123, 757, 232 [a.u] was recorded at gadolinium. BDEPS(the Biggest Difference of EPS) was shown as each sequences 1297, 123, 757, 232 [a.u] at iodine and 793, 6, 1495, 365 [a.u] was recorded at gadolinium. At this time, EPS(Enhancement Percentage to Saline) was shown 641.1, -90.0, 127.3, 527% at iodine and 685.1, 99.4, 365.7, 1077.4% was recorded at gadolinium. BP(BDEPS's point) was shown 900, 900, 477, 900 mmol at iodine and 4, 0.2, 0.2, 40 mmol was recorded at gadolinium. CPSS(Change Point of SI to SSI) was shown 63, 423, 63, 29 mmol at iodine and each [50, 30], [4, 0.2], [4, 1], 0.2 mmol was recorded at gadolinium. According to this research, we could not only discover the fact that was iodine could effect on MR signal, but also the pattern is different as various sequences compare to gadolinium. Therefore, we expect useful diagnostic MR image in clinical field with this quantitative data for deciding protocol regarding MRI and CT scan order.

• Journal of The Korean Association For Science Education
• /
• v.35 no.6
• /
• pp.939-947
• /
• 2015

For secondary school teachers who attended 'A Social Constructionism Science Teacher Training Program', we analyzed their processes of cognizance change as well as whether they put its results into practice in the field of education, so as to find out the efficacy of the program. 'A Social Constructionism Science Teacher Training Program' consists of three phases based on La main ${\grave{a}}$ la $p{\hat{a}}te$, a French experience-oriented science education program. In its first phase, a study of the philosophy of La main ${\grave{a}}$ la $p{\hat{a}}te$ was made, together with a search for examples of creativity education. In its second and third stages, real education programs were developed for designated themes and free themes, respectively, and then discussions were made. It was a ten-session program, with each session comprising a four-hour sub-program. All activities were both visually and orally recorded, while the participants were asked to write reflective journals for each class. An additional survey and interview were conducted six months later to check if the seven selected secondary school teachers put the results of the program into practice. It was found that changes may be made in the beliefs of teachers with the introduction of theories in teacher indoctrination, but the acquisition of practical knowledge that can be implemented in actual classes may be effectively secured by demonstrations and practice sessions. It was concluded that indoctrination should be conducted to lead participants to the level of practical planning from the level of mere belief so that the theories might actually be put into practice in the education field.

• 한국해양학회지
• /
• v.14 no.1
• /
• pp.15-25
• /
• 1979

A study on field bioassay test using four species of commercially important shellfish was carried out to assess the effect of pollutants and determine the extent of marine environmental pollution of the Masan Bay from 9 to 15 August 1978. Water quality analysis and planktological examination of sea water were made during the experiment and the examination gave the following results. The water temperature was so high at 31.7$^{\circ}C$ in maximum and rather subject to change on weather condition of the land than on the effect of the water mass from outer bay. The range of DO,COD and SS at the stations were 0.3-7.08cc/l, 0.07-3.31ppm and 5.5-117ppm, respectively with the high values of COD and SS at the stations 7 and 1. The concentrations of the dissolved inorganic nitrogen in sea water, NH$\sub$4/-N, NO$\sub$2/-N, NO$\sub$3/-N, and PO$\sub$4/-P were 18.90-99.80, 2.48- 19.60, 13.00-39.00 and 1.04-14.0$\mu\textrm{g}$ at/l, respectively with decrease of their values in the outer part of the Bay. The high values mentioned above were caused by the sewage and industrial activities. The effects of organic waste are increased oxygen demand, nutrient concentration, turbidity and a higher input of pathogens, leading to structural changes in the marine ecosystems and to a considerable hazard to public health. The percentage composition of phytoplankton standing crop between diatom and dinoflagellate was characterized by making a difference between the two groups in respect of location: a decrease of diatom and a increase of dinoflagellate in numerical abundance toward inner part from outer part of the bay. Namely phytoplankton organisms were composed of 80% of diatom and 20% of dinoflagellate in outer bay, on the contrary, only 4% of diatom and 96% of dinoflagellate occupied by 94% of prorocentrum micans known as tolerant species to polluted reaas in the inner bay. On the occurrence and composition of zooplankton, there are two significant communities in the bay:one is characterized by the predominance of Oithona nana and the other by Favella sp They were composed of a range from 84% to 90% of the total organisms and monotonously constituted of themselves only at most inner station 3 even small numbers. From the results mentioned above, Oithona nana, Favella and prorocentrum micans recommed themselves as valuable indicators for judging the extent of the marine pollution.During the period of the biossays Mytilus edulis showed the highest mortality and Tapes japonica the lowest one between the four test species. The highest death rate by stations was found at most inner stations 3'and 4near Masan Free Export Zone with the most sensitive response and the lowest one occured at outer station 13 where no death specimen of oyster and arkshell was found during the whole test period.As for mussel,85 percent death rate appeared after 72 hours and 100percent rate after 120hours at station 4. It was found that the significant high mortality of the test shellfish mentioned above was caused by severe pollution with mainly organic pollutants from domestic sewage and industrial wastes from the results of too much higher concentrations of dissolved inorganic nitrogen especially ammonia-N,COD,SS and lack of dissolved oxygen,and furthermore occurrence and abundance composition of Prorcentrum,Favella and Oithona nana by stations, valuable indicator species of coastal pollution by orgnic and boilogical pollutants.

• The Journal of the Petrological Society of Korea
• /
• v.11 no.1
• /
• pp.1-16
• /
• 2002

The study area is mostly composed of Precambrian Gyeonggi gneiss complex, Jurassic Daebo granites, Cretaceous tonalite and dykes, and so on. On the basis of field survey and mineral assemblage, the granites can be divided into three types; biotite granite (Gb), garnet biotite granite (Ggb) and two mica granite (Gtm). They predominantly belong to monzo-granites from the modes. Field relationship and K-Ar mica age data in the surrounding area suggest that intrusive sequences are older in order of Gtm, Ggb and Gb. Gb and Ggb, major study targets, occur as medium-coarse grained rocks, and show light grey and light grey-light pink colors, respectively. Mineral constituents are almost similar except for opaque in Gb and garmet in Ggb. Gb and Ggb have felsic, peraluminous, subalkaline and calc alkaline natures. In Harker diagram, both rocks show moderately negative trends of $TiO_2$, MgO, CaO, $Al_2O_3$, $Fe_2O_3$(t), $K_2O$ and $P_2O_5$ as $SiO_2$ contents increase. Among them, $TiO_2$, MgO and CaO show two linear trends. From the trends and the linear patterns in AFM, Sr-Ba and Rb-Ba-Sr relations, it is likely that they were originated from the same granitic magma and Ggb was differentiated later than Gb. REE concentrations normalized to chondrite value have trends of parallel LREE enrichment and HREE depletion. One data of Ggb showing a gradually enriched HREE trend may be caused by garnet accompaniment. Ggb have more negative Eu anomalies than Gb, suggesting that plagioclase fractionation in Ggb have occurred much stronger than that in Gb. In modal (Qz+Af) vs. Op, Gb and Ggb belong to magnetite-series and ilmenite-series, respectively. From the EPMA results, opaques of Gb are magnetite and ilmenite, and those of Ggb are magnetite-free ilmenite or not observed. Bimodal distribution of magnetic susceptibility reveals two different granites of Gb (332.6 ${mu}SI$) and Ggb (2.3 ${mu}SI$). Based on the paleomagnetic analysis as well as modal analysis, the main susceptibilities of Gb and Ggb reside in magnetite and mafic minerals, respectively. They belong to S-type granite of non-magnetic granite by susceptibility value. In addition, $SiO_2$ contents, $K_2O/Na_2O$, A/CNK molar ratio and ACF diagram support that they all belong to S-type granites.

• Journal of Korean Home Economics Education Association
• /
• v.19 no.4
• /
• pp.91-117
• /
• 2007

This study was to compare the contents and practical problems addressed, the process of teaching-learning method, and evaluation method of Korean Home Economics curriculum and of the Oregon and Ohio's Practical Problem Focused Family & Consumer Sciences Curricula. The results are as follows. First, contents of Korean curriculum are organized by major sub-concepts of Home Economics academic discipline whereas curricular of both Oregon and Ohio states are organized by practical problems. Oregon uses the practical problems which integrate multi-subjects and Ohio uses ones which are good for the contents of the module by integrating concerns or interests which are lower or detailed level (related interests). Since it differentiates interest and module and used them based on the basic concept of Family and Consumer Science, Ohio's approach could be easier for Korean teachers and students to adopt. Second, the teaching-learning process in Korean home economics classroom is mostly teacher-centered which hinders students to develop higher order thinking skills. It is recommended to use student-centered learning activities. State of Oregon and Ohio's teaching-learning process brings up the ability of problem-solving by letting students clearly analyze practical problems proposed, solve problems by themselves through group discussions and various activities, and apply what they learn to other problems. Third, Korean evaluation system is heavily rely on summative evaluation such as written tests. It is highly recommended to facilitate various performance assessment tools. Since state of Oregon and Ohio both use practical problems, they evaluate students mainly based on their activity rather than written tests. The tools for evaluation include project documents, reports of learning activity, self-evaluation, evaluation of discussion activity, peer evaluation in a group for each students for their performance, assessment about module, and written tests as well.

• The Journal of Korean Society for Radiation Therapy
• /
• v.25 no.2
• /
• pp.115-121
• /
• 2013

Purpose: Latest linear accelerator and the introduction of new measurement equipment to the agency that the introduction of this equipment in the future, by analyzing the process of confirming the usefulness of the preparation process for applying it in the clinical causes some problems, should be helpful. Materials and Methods: All measurements TrueBEAM STX (Varian, USA) was used, and a file specific to each energy, irradiation conditions, the dose distribution was calculated using a computerized treatment planning equipment (Eclipse ver 10.0.39, Varian, USA). Measuring performance and cause errors in MapCHECK 2 were analyzed and measured against. In order to verify the performance of the MapCHECK 2, 6X, 6X-FFF, 10X, 10X-FFF, 15X field size $10{\times}10$ cm, gantry $0^{\circ}$, $180^{\circ}$ direction was measured by the energy. IGRT couch of the CT values affect the measurements in order to confirm, CT number values : -800 (Carbon) & -950 (COUCH in the air), -100 & 6X-950 in the state for FFF, 15X of the energy field sizes $10{\times}10$, gantry $180^{\circ}$, $135^{\circ}$, $275^{\circ}$ directionwas measured at, MapPHAN allocated to confirm the value of HU were compared, using the treatment planning computer for, Measurement error problem by the sharp edges MapPHAN Learn gantry direction MapPHAN of dependence was measured in three ways. GANTRY $90^{\circ}$, $270^{\circ}$ in the direction of the vertically erected settings 6X-FFF, 15X respectively, and Setting the state established as a horizontal field sizes $10{\times}10$, $90^{\circ}$, $45^{\circ}$, $315^{\circ}$, $270^{\circ}$ of in the direction of the energy-6X-FFF, 15X, respectively, were measured. Without intensity modulated beam of the third open arc were investigated. Results: Of basic performance MapCHECK confirm the attenuation measured by Couch, measured from the measured HU values that are assigned to the MAP-PHAN, check for calculation accuracy for the angled edge of the MapPHAN all come in a range of valid measurement errors do not affect the could see. three ways for the Gantry direction dependence, the first of the meter built into the value of the Gantry $270^{\circ}$ (relative $0^{\circ}$), $90^{\circ}$ (relative $180^{\circ}$), 6X-FFF, 15X from each -1.51, 0.83% and -0.63, -0.22% was not affected by the AP/PA direction represented. Setting the meter horizontally Gantry $90^{\circ}$, $270^{\circ}$ from the couch, Energy 6X-FFF 4.37, 2.84%, 15X, -9.63, -13.32% the difference. By-side direction measurements MapPHAN in value is not within the valid range can not, because that could be confirmed as gamma pass rate 3% of the value is greater than the value shown. You can check the Open Arc 6X-FFF, 15X energy, field size $10{\times}10$ cm $360^{\circ}$ rotation of the dose distribution in the state to look at nearly 90% pass rate to emerge. Conclusion: Based on the above results, the MapPHAN gantry direction dependence by side in the direction of the beam relative dose distribution suitable for measuring the gamma value, but accurate measurement of the absolute dose can not be considered is. this paper, a more accurate treatment plan in order to confirm, Reduce the tolerance for VMAT, such as lateral rotation investigation in order to measure accurate absolute isodose using a combination of IMF (Isocentric Mounting Fixture) MapCHEK 2, will be able to minimize the impact due to the angular dependence.

• Journal of Intelligence and Information Systems
• /
• v.24 no.3
• /
• pp.177-198
• /
• 2018

Recently, as economic property it has become necessary to acquire and utilize the framework for water resource measurement and performance management as the property of water resources changes to hold "public property". To date, the evaluation of water technology has been carried out by feasibility study analysis or technology assessment based on net present value (NPV) or benefit-to-cost (B/C) effect, however it is not yet systemized in terms of valuation models to objectively assess an economic value of technology-based business to receive diffusion and feedback of research outcomes. Therefore, K-water (known as a government-supported public company in Korea) company feels the necessity to establish a technology valuation framework suitable for technical characteristics of water resources fields in charge and verify an exemplified case applied to the technology. The K-water evaluation technology applied to this study, as a public interest goods, can be used as a tool to measure the value and achievement contributed to society and to manage them. Therefore, by calculating the value in which the subject technology contributed to the entire society as a public resource, we make use of it as a basis information for the advertising medium of performance on the influence effect of the benefits or the necessity of cost input, and then secure the legitimacy for large-scale R&D cost input in terms of the characteristics of public technology. Hence, K-water company, one of the public corporation in Korea which deals with public goods of 'water resources', will be able to establish a commercialization strategy for business operation and prepare for a basis for the performance calculation of input R&D cost. In this study, K-water has developed a web-based technology valuation model for public interest type water resources based on the technology evaluation system that is suitable for the characteristics of a technology in water resources fields. In particular, by utilizing the evaluation methodology of the Institute of Advanced Industrial Science and Technology (AIST) in Japan to match the expense items to the expense accounts based on the related benefit items, we proposed the so-called 'K-water's proprietary model' which involves the 'cost-benefit' approach and the FCF (Free Cash Flow), and ultimately led to build a pipeline on the K-water research performance management system and then verify the practical case of a technology related to "desalination". We analyze the embedded design logic and evaluation process of web-based valuation system that reflects characteristics of water resources technology, reference information and database(D/B)-associated logic for each model to calculate public interest-based and profit-based technology values in technology integrated management system. We review the hybrid evaluation module that reflects the quantitative index of the qualitative evaluation indices reflecting the unique characteristics of water resources and the visualized user-interface (UI) of the actual web-based evaluation, which both are appended for calculating the business value based on financial data to the existing web-based technology valuation systems in other fields. K-water's technology valuation model is evaluated by distinguishing between public-interest type and profitable-type water technology. First, evaluation modules in profit-type technology valuation model are designed based on 'profitability of technology'. For example, the technology inventory K-water holds has a number of profit-oriented technologies such as water treatment membranes. On the other hand, the public interest-type technology valuation is designed to evaluate the public-interest oriented technology such as the dam, which reflects the characteristics of public benefits and costs. In order to examine the appropriateness of the cost-benefit based public utility valuation model (i.e. K-water specific technology valuation model) presented in this study, we applied to practical cases from calculation of benefit-to-cost analysis on water resource technology with 20 years of lifetime. In future we will additionally conduct verifying the K-water public utility-based valuation model by each business model which reflects various business environmental characteristics.