• 한국수산과학회지
• /
• 제10권4호
• /
• pp.221-226
• /
• 1977

동결저장중 옥돔의 상품가치의 유지와 선도유지기간의 연장에 대한 BHA 및 polyposphate의 처리효과에 대한 실험 결과를 요약하면 다음과 같다. 1) 염가용성 단백질은 동결저장온도에 따라 용출도에 차이가 있었으나, 약품처리에 따른 용출도의 차이는 없었다. 2) 유리수의 유출량은 동결저장기간중 저장온도에 따라 현저한 차이가 있었고, sodium polyphosphate 처리한 것이 유리수 유출량이 적었다. 3) 휘발성 염기실소의 량은 저장온도에 따라 현저한 차이가 있으나, 약품처리에 따른 차이는 거의 없었다. 4) TBA값은 저장온도에 따라 현저한 차이가 있었고, sodium polyphosphate 처리한 것이 BHA 처리한 것보다 6개월 저장 후에도 약간 낮았다. 5) carotene 변화 역시 저장염도에 따라 현저한 차이가 있으며, 특히 $-5^{\circ}C$저장에서는 3개월 저장 이후는 외관적으로 상품가치가 없는 것으로 판단되었다. 약품처리에 따른 색소는 BHA, sodium polyphosphate, control 순으로 적었다. 옥돔은 BHA 또는 sodium polyphosphate로서 처리하며 $-35^{\circ}C$이하의 온도에 동결저장함으로서 그 상품가치를 비교적 장기간 유지할 수 있다고 본다. 본 연구는 아시아 재단의 연구보조비(1977연)에 의하여 수행되었으머, 본실험을 도와준 본대학 식품공학과 3년 이병태, 김영준, 정오화 제군에게 사의를 표한다.

• 한국수산과학회지
• /
• 제43권1호
• /
• pp.18-24
• /
• 2010

The biochemical composition of wild and cultured yellow croaker, Larimichthys polyactis, was analyzed in this study. The moisture contents in wild and cultured yellow croaker was high: $75.2{\pm}1.60%$ and $79.5{\pm}1.95%$, respectively. The crude lipid contents of wild and cultured yellow croaker were low; moreover, the crude protein and ash contents did nol differ significantly (P>0.05). The total amino acid content of wild and cultured yellow croaker did not differ significantly; however, the cystine content of wild yellow croaker was higher than than of cultured yellow croaker. The essential /nonessential amino acid (E/NE) ratio in wild and cultured yellow croaker was $0.76{\pm}0.01$ and $0.77{\pm}0.02$, respectively. The free amino acid and extractive nitrogen contents of cultured yellow croaker were high and differed significantly. The water soluble vitamin ($B_1$, $B_2$, $B_6$, $B_{12}$, C and folate) and fat-soluble vitamin (A and E) contents did not differ significantly. expect for niacin. The niacin content of cultured yellow croaker was higher than that of wild yellow croaker. The fatty acid composition of wild and cultured yellow croaker did not differ significantly The sodium, magnesium, and copper contents in wild yellow croaker were relatively low. In comparison, the calcium, phosphorus and iron contents in cultured yellow croaker were relatively high. Overall, the biochemical composition of wild and cultured yellow croaker did not differ significantly.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권3호
• /
• pp.414-419
• /
• 2005

The current study was conducted to investigate the effects of dietary chitosan-alginate-Fe(II) complex (CAFC) supplementation on carcass and meat qualities of pig m. longissimus during chiller ageing. One hundred and twenty-two LYD (Landrace${\times}$Yorkshire${\times}$Duroc) pigs were sampled from an industrial population. Seventy-four pigs (32 gilts and 42 barrows) were administered 3 ml of dietary supplementation of CAFC per day from 25 to 70 days of age, while the remaining 48 pigs (20 gilts and 28 barrows) were fed the same commercial feeding regime without the supplementation. For assessing the dietary effects on pH, objective meat color, cooking loss, water-holding capacity (WHC), thiobarbituric acid reactive substances (TBARS), volatile basic nitrogen (VBN) and fatty acid composition during ageing, 20 barrows (10 of each treatment) were randomly sampled, and aged for 3, 7, 12, 16, 20 and 25 days in a $1^{\circ}C$ chiller. The results showed that CAFC-fed pigs required approximately 10 fewer feeding days than the control group. Furthermore, the treatment resulted in greatly higher carcass grade whereby the grade A was increased by approximately 35% and 7% for gilts and barrows, respectively. The treatment had no significant effect (p>0.05) on pH, meat color and WHC during ageing. On the other hand, the CAFC-fed pigs showed significantly (p<0.05) lower TBARS values from 20 days of storage. In addition, the sum of unsaturated fatty acids for the treated group was significantly (p<0.05) higher than that for the control group after the storage time. This implied that CAFC supplementation could reduce the formation of free radicals in fatty acids (i.e., lipid oxidation). The treatment also significantly (p<0.05) retarded VBN formation during ageing, indicating a significant reduction in protein degradation. However, as there was no difference in pH between the two groups, the result raised a possibility that antibacterial activity of the CAFC alone could cause reduction in the formation of TBARS and VBN. In this regard, although the treatment effectively slowed down the formation of TBARS and TBA during chiller ageing, it was not resolved whether that was associated with the direct effect of the antioxidant function of chitosan and/or alginate, or a consequence of their antibacterial functions.

• Asian-Australasian Journal of Animal Sciences
• /
• 제25권2호
• /
• pp.224-233
• /
• 2012

The limiting sequence and relative ratio of lysine (Lys), methionine (Met), and threonine (Thr) for calves about 2 mo of age fed milk replacers (MR) containing soy protein are not clearly defined. The objective of the study was to investigate the effect of supplementing MR containing 22% CP, half from soy protein concentrate (SPC, 40.56% CP, flour) and half from whey proteins, with Lys, Met, and Thr to estimate amino acid (AA) sequence and their relative ratio for calves about 2 mo of age. A method of partial deduction of AA was adopted. Twenty-four newborn calves (half males and half females, $40.7{\pm}0.9$ kg of BW) were fed 1 of 4 MR diets for 56 d (n = 6/diet). The diets were supplemented with all (positive control) or with 2 of the 3 AAs: Lys, Met and Thr, (i.e., PC (22% CP, 2.34% Lys, 0.72% Met and 1.80% Thr), PC-Lys (22% CP, 1.64% Lys, 0.72% Met and 1.80% Thr), PC-Met (22% CP, 2.34% Lys, 0.50% Met and 1.80% Thr), and PC-Thr (22% CP, 2.34% Lys, 0.72% Met and 1.26% Thr)). Calves were fed thrice daily; starter (20% CP, 1.03% Lys, 0.30% Met and 0.69% Thr), hay (3.23% CP, 0.29% Lys, 0.12% Met and 0.23% Thr) and water were offered free choice. Starter and hay were only offered beginning on d 36 (after 5 wk) and d 43 (after 6 wk), respectively. BW, body size and blood samples measures were taken every two weeks. Three-day total collection of feed refusals, feces, and urine were recorded starting at d 33 and d 54 of age, respectively. From the results, the limiting sequence and relative ratio between the 3 AAs in calves with different diet structures were calculated. The limiting sequence of the 3 AAs were ranked as Lys, Met and Thr; the proper ratio was 100:29:70 for MR-only diet and 100:30:60 for diets consisted of MR, starter and hay. Nitrogen digestion and utilization and nutrient digestibility were negatively affected by AA deletion treatments. From the evidence of this experiment, it did not appear that the AA limiting sequence was selectively altered by differences in diet structures such as would be encountered in practice. The relative ratio between the 3 AAs varied with the offer of starter and hay to calves, and the average ratio was 100:29.5:65 for calves during 2 to 10 wk of age.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권2호
• /
• pp.293-300
• /
• 2018

Objective: This study observed the effects of cooking method and final core temperature on cooking loss, lipid oxidation, aroma volatiles, nucleotide-related compounds and aroma volatiles of Hanwoo brisket (deep pectoralis). Methods: Deep pectoralis muscles (8.65% of crude fat) were obtained from three Hanwoo steer carcasses with $1^+$ quality grade. Samples were either oven-roasted at $180^{\circ}C$ (dry heat) or cooked in boiling water (moist heat) to final core temperature of $70^{\circ}C$ (medium) or $77^{\circ}C$ (well-done). Results: Boiling method reduced more fat but retained more moisture than did the oven roasting method (p<0.001), thus no significant differences were found on cooking loss. However, samples lost more weight as final core temperature increased (p<0.01). Further, total saturated fatty acid increased (p = 0.02) while total monounsaturated fatty acid decreased (p = 0.03) as final core temperature increased. Regardless the method used for cooking, malondialdehyde (p<0.01) and free iron contents (p<0.001) were observed higher in samples cooked to $77^{\circ}C$. Oven roasting retained more inosinic acid, inosine and hypoxanthine in samples than did the boiling method (p<0.001), of which the concentration decreased as final core temperature increased except for hypoxanthine. Samples cooked to $77^{\circ}C$ using oven roasting method released more intense aroma than did the others and the aroma pattern was discriminated based on the intensity. Most of aldehydes and pyrazines were more abundant in oven-roasted samples than in boiled samples. Among identified volatiles, hexanal had the highest area unit in both boiled and oven-roasted samples, of which the abundance increased as the final core temperature increased. Conclusion: The boiling method extracted inosinic acid and rendered fat from beef brisket, whereas oven roasting intensified aroma derived from aldehydes and pyrazines and prevented the extreme loss of inosinic acid.

• 한국미생물·생명공학회지
• /
• 제35권4호
• /
• pp.325-333
• /
• 2007

전통된장으로부터 분리한 Bacillus subtilis DJI은 다른 Bacillus 속에 비해 균체 생육이 빠르게 진행되어 9시간 만에 생육이 최대값에 이른다. 그 이후 사멸기에 접어들면서 자기소화에 의해 급격한 세포파쇄가 이루어져 포자가 세포외로 방출됨과 동시에 다량의 단백분해효소가 세포 밖으로 방출된다. 이러한 B. subtilis DJI 특유의 생육특징을 이용하여 세균형 코지와 된장을 제조(DJI 된장)하였으며, 제조된장의 숙성 60일 이후 일반성분을 분석한 결과 아미노태 질소 507 mg%, 조단백 14.3%, 조지방 4.8%로 식품공전상의 된장규격에 만족하였다. 또한 단백질 구성아미노산과 유리아미노산의 함량을 분석한 결과 유리아미노산의 총 함량이 숙성 30일에는 299.255 mg%에서 60일 이후에는 547.784 mg%로 증가함을 확인할 수 있었다. DJI 된장과 6종의 가정식 된장의 혈전용해능을 비교한 결과 DJI 된장은 909.7 units/ml, 재래된장은 $363.3{\sim}618.6\;units/ml$로 나타내었다. DJI 된장은 관능적으로도 쿰쿰한 냄새가 거의 없고 구수한 된장향이 났으며, GC/MS를 통한 DJI 된장의 향기성분을 분석한 결과에서도 재래된장 특유의 쿰쿰한 냄새의 원인물질 (3-methyl-1-butanol, 1-octen-3-ol, butanoic acid)은 적은양 검출된 반면 재래된장 고유의 맛과 향의 원인물질 (benzaldehyde, 2-furancarboxaldehyde, hexadecanoic acid)은 일정량 이상 검출되었다. 현재 식품공전상 된장은 대두나 곡물에 종국을 섞어 제국하여 발효 숙성시키거나, 메주를 식염수에 담가 발효하여 여액분리 후 이를 가공한 것으로 정의하고 있다. 즉 현재까지 된장은 주로 곰팡이의 단백분해효소에 의한 발효, 숙성물이었으나 본 연구에서는 B. subtilis DJI의 특이한 생육특성에 의하여 이를 사용한 새로운 개념의 세균형 코지제조와 이를 활용하여 재래된장 고유의 구수한 풍미를 지닌 맛있는 된장제조가 2개월 안에 제조 가능함을 나타내었다.

• 자원리싸이클링
• /
• 제11권1호
• /
• pp.26-31
• /
• 2002

음이온 교환막을 사용하는 확산투석법으로 폐$H_2$$SO_4$용액으로부터 $H_2$$SO_4$을 회수하는 연구를 수행하였다. 유속. 온도, $H_2$$SO_4$농도, 금속이온 등이 $H_2$$SO_4$의 회수율에 미치는 영향을 조사하였다 $H_2$$SO_4$의 회수율은 유속과 $H_2$$SO_4$농도가 증가함에 따라 감소하였으며 온도가 높아짐에 따라 증가하였다. 물/$H_2$$SO_4$용액의 유속비가 높아짐에 따라 $H_2$$SO_4$의 회수율이 증가하였으나 유속비가 1 이상에서는 더 이상 증가하지 않았다 Fe와 Ni의 배제율은 유속의 영향을 거의 받지 않았다. 유속을 0.26 $1/hr-m^2$로 하여 4.5M유리$-H_2$$SO_4$이 존재하는 폐$H_2$SO$_4$용액으로부터 80%의 $H_2$$SO_4$을 회수할 수 있었으며 이 때 회수산의 $H_2$$SO_4$농도 및 순도는 각각 4.3M, 99.8%이었다.

• 대한화장품학회지
• /
• 제33권3호
• /
• pp.181-187
• /
• 2007

본 연구에서는 고려엉겅퀴 추출물의 항산화 효과, 사람섬유아세포에 자외선에 의해 유도된 MMP-1 발현에 대한 영향 및 피부탄력 개선효과에 대하여 연구하였다. 고려엉겅퀴 추출물의 DPPH radical과 superoxide anion radical 소거효과는 처리 농도가 증가함에 따라 농도 의존적으로 소거효과를 나타냈으며, 각각 1 mg/mL에서 87.47 %와 61.71 %로 DPPH radical과 superoxide anion radical을 소거하여 우수한 항산화 효과를 나타내었다. 고려엉겅퀴 추출물의 지질과산화 억제효과는 100 ${\mu}g/mL$ 농도에서 95.54%의 지질과산화 저해효과를 나타내었다. 또한, 자외선 조사에 의해 사람 섬유아세포에서 증가되는 MMP-1의 단백질 발현은 고려엉겅퀴 추출물을 100 ${\mu}g/mL$ 농도로 처리하였을 때 54.69% 감소하였다. 피부의 탄력 개선 효과를 알아보기 위해 고려엉겅퀴 추출물을 500 ${\mu}g/mL$ 함유한 O/W 에멀젼을 이용한 임상실험에서 피부의 탄력 개선 효과를 확인하였다. 본 연구를 통하여 고려엉겅퀴 추출물은 항산화 효과와 자외선으로부터 생성되는 MMP-1의 발현을 저해하고 피부의 탄력을 개선함으로써 항노화 소재로서의 응용가능성을 확인하였다.

• 대한조선학회지
• /
• 제22권2호
• /
• pp.35-48
• /
• 1985

The present work develops a method of evaluating thrust deduction and wake for different loads of the propeller using the concerted application of the theoretical tools and experimental techniques. It also shows the applicability of the new method to the design of optimum hull form. Firstly, the problem of hull-propeller interaction was analyzed in terms of inviscid as well as viscous components of the thrust deduction and wake. The wavemaking resistance of a hull and propeller were mathematically represented by sources on the hull surface and sink on the propeller plane, respectively. The strength of sink was determined by utilizing the radial distributions of propeller load and nominal wake. The resistance increment due to a propeller and the axial perturbation flow induced by the hull in the propeller plane were calculated. Especially, the inviscid component of the thrust deduction was calculated by subtraction the wavemaking resistance of a bare hull, the wavemaking resistance of a free-running propeller and the augmentation of propeller resistance due to hull action from the wavemaking resistance of the hull with a propeller. The viscous components of the thrust deduction and wake were estimated as functions of propeller load which were established by the propeller load varying test after deduction the calculated inviscid components. Secondly, an analysis method of powering performance was developed based on the potential theory and the propeller load varying test. The hybrid method estimates the thrust deduction, wake and propeller open-water efficiency for different propeller load. This method can be utilized in the analysis of powering performance for the propeller load variation such as the added resistance due to hull surface roughness, the added resistance due to wind, etc. Finally, the hybrid method was applied to the optimum design of hull form. A series of afterbody shapes was obtained by systematically varying the waterplane and section shapes of a parent afterbody without changing the principal dimensions, block coefficient and prismatic coefficient. From the comparison of the predicted results such as wavemaking resistance, thrust deduction, wake and delivered power, an optimum hull form was obtained. The delivered power of the optimized hull form was reduced by 5.7% which was confirmed by model tests. Also the predicted delivered power by the hybrid method shows fairly good agreement with the test result. It is therefore considered that the new analysis method of powering performance can be utilized as a practical tool for the design of optimum hull form as for the analysis of powering performance for the propeller load variation in the preliminary design stage.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.15-15
• /
• 2011

As you know, boron compounds, borax ($Na_2B_4O_5(OH)_4{\cdot}8H_2O$) etc. were known thousands of years ago. As for natural boron, it has two naturally occurring and stable isotopes, boron 11 ($^{11}B$) and boron 10 ($^{10}B$). The neutron absorption $^{10}B$ is included about 19~20% with 80~81% $^{11}B$. Boron is similar to carbon in its capability to form stable covalently bonded molecular networks. The mass difference results in a wide range of ${\beta}$ values between the $^{11}B$ and $^{10}B$. The $^{10}B$ isotope, stable with 5 neutrons is excellent at capturing thermal neutrons. For example, it is possible to decrease a thermal neutron required for the nuclear reaction of uranium 235 ($^{235}U$). If $^{10}B$ absorbs a neutron ($^1n$), it will change to $^7Li+^1{\alpha}$ (${\alpha}$ ray, like $^4He$) with prompt ${\gamma}$ ray from $^{11}B$ $^{11}B$ (equation 1). $$^{10}B+^1n\;{\rightarrow}\;^{11}B\;{\rightarrow}\; prompt \;{\gamma}\;ray (478 keV), \;^7Li+4{\alpha}\;(4He)\;\;\;\;{\cdots}\; (1)$$ If about 1% boron is added to stainless steel, it is known that a neutron shielding effect will be 3 times the boron free steel. Enriched boron or $^{10}B$ is used in both radiation shielding and in boron neutron capture therapy. Then, $^{10}B$ is used for reactivity control and in emergency shutdown systems in nuclear reactors. Furthermore, boron carbide, $B_4C$, is used as the charge of a nuclear fission reaction control rod material and neutron cover material for nuclear reactors. The $B_4C$ powder of natural B composition is used as a charge of a control material of a boiling water reactor (BWR) which occupies commercial power reactors in nuclear power generation. The $B_4C$ sintered body which adjusted $^{10}B$ concentration is used as a charge of a control material of the fast breeder reactor (FBR) currently developed aiming at establishment of a nuclear fuel cycle. In this study for new boron compound, silicon boride ceramics for capturing thermal neutrons, preparation and characterization of both silicon tetraboride ($SiB_4$) and silicon hexaboride ($SiB_6$) and ceramics produced by sintering were investigated in order to determine the suitability of this material for nuclear power generation. The relative density increased with increasing sintering temperature. With a sintering temperature of 1,923 K, a sintered body having a relative density of more than 99% was obtained. The Vickers hardness increased with increasing sintering temperature. The best result was a Vickers hardness of 28 GPa for the $SiB_6$ sintered at 1,923K for 1 h. The high temperature Vickers hardness of the $SiB_6$ sintered body changed from 28 to 12 GPa in the temperature range of room temperature to 1,273 K. The thermal conductivity of the SiB6 sintered body changed from 9.1 to 2.4 W/mK in the range of room temperature to 1,273 K.