• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.8
• /
• pp.1215-1220
• /
• 2008

To obtain the shape of the free surface more accurately, computations are carried out by a finite volume method using unstructured meshes and an interface capturing method. Free-surface flow, which is very important in the fields of ship and marine engineering, is numerically simulated for flows of both water and air. Control volumes are used with an arbitrary number of faces and allows a local mesh refinement. The integration is of second order, with a midpoint rule integration and linear interpolation. The method is fully implicit and uses quadratic interpolation. The solution method of pressure-correction type solves sequentially equations of momentum, continuity, conservation, and two-equations turbulence model. Comparison are quantitatively made between the computation and experiment in order to confirm the solution method.

• Journal of the Korean Ceramic Society
• /
• v.42 no.1
• /
• pp.1-6
• /
• 2005

In aqueous alumina tape casting, the effects of altering the composition of the suspensions, the binders and the casting thickness were studied. The rheological behavior of the suspensions and the defects of the dried tapes were examined and the relationships between them are discussed. The changes in the defect regions reported in the previous paper were related with the rheological properties with variations of the binder, the composition and the casting thickness. The shear thinning factor increased with the organic content and the solid content (the decrease of water content). The apparent viscosity increased with the shear thinning factor. The relation between the shear thinning factor and the log apparent viscosity was similar for all binder types. In the relation between the defect free region and the rheological properties, the defect free region became narrower with increasing casting thickness. The defect free region is independent of binder type. Therefore, the thicker tape is more difficult to produce in aqueous alumina tape casting. Knowledge of the rheological properties of the suspensions could help Predict the defect type and the possibility of defect free dried tapes.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.7 no.1
• /
• pp.89-97
• /
• 1995

Experimental study was performed for free convection and ice formation around two horizontal circular tubes which were placed vertically. Temperature and velocity distributions were visualized with real time holographic interferometry technique and tracer method. When water was cooled, super cooled region was formed around cooling pipe. It was found that flow induced by free convection always directed downwards when the coolant temperature was low, while it directed upwards when the coolant temperature was comparably high though it directed downwards initially. Flow phenomena with free convection were investigated in detail with varying cooling rate and length between cooling pipes. And growing process of dense ice was also investigated. Dendritic ice is suddenly formed within a supercooled region, and a dense ice layer begins to develop from the cooling wall.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.8
• /
• pp.877-882
• /
• 2001

The solvent effects on the relative free energies of Eu3+ to Yb3+ ion mutation in solution have been investigated using a Monte Carlo simulation of statistical perturbation theory (SPT). Our results agree well with available data that were obtained by others. Particularly, the results of water (SPC/E) solvent are almost identical with experimental data. For the present Eu3+ and Yb3+ ions, the relative free energies of solvation vs. Born’s function of bulk solvents decrease with increasing Born’s function of bulk solvents. There is also good agreement between the calculated structural properties in this study and the published works obtained by computer simulation and experimental work.

• Proceedings of the Korean Reliability Society Conference
• /
• 2005.06a
• /
• pp.385-392
• /
• 2005

The restriction of the use of hazardous substances in electrical and electronic equipment legislation mandates the substitution of lead and other hazardous substances in electronics products by July 2006. Due to this legislative pressure, the electronics industry is moving to adoption of lead free solders. In this paper, we investigated a flux to restrict generating electrochemical migration in lead-free solder. The lead-free solders used in this study were Sn-0.7Cu-0.01P and Sn-3.0Ag-0.5Cu. To measure the resistance of electrochemical migration, the dew-cycle test and water drop test were adopted. As the result, now flux having high durable of electrochemical migration was developed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.9
• /
• pp.1027-1031
• /
• 2014

Free cooling system is used to reduce energy consumption of cooling system. Free cooling system is consisted of cooling group and dry-cooler in which heat exchange of chilled water and out air is conducted. Although this system has an excellent energy saving effect in place having cooling load regularly, data or material of design for free cooling system is lacked. In this study, characteristics analysis of free cooling system is conducted through software HYSYS with changing some facts. The main result is following as : Dry-cooler capacity is influenced by out air temperature, required chilled water temperature and LMTD(Logarithmic Mean Temperature Difference) of heat exchanger. As out air temperature is more low, dry-cooler capacity become increased. in addition, as required chilled water temperature is more high and LMTD is more low, the out air temperature range is widened for using dry-cooler. If out air temperature is below $0^{\circ}C$, antifreeze need to be used because freeze and burst can be occurred. In case of South Korea, antifreeze of 34% of ethylene glycol concentration is proper. When compressor load of R22, R134a and R407C is compared, considering environmental regulation and energy consumption, R134a is best working fluid.

• Journal of Mushroom
• /
• v.12 no.2
• /
• pp.107-116
• /
• 2014

Gloeostereum incarnatum is an edible and medicinal mushroom belongs to Family Cyphellaceae of Polyporales, Basidiomycota. The purpose of this study was to investigate the free radical scavenging, anti-inflammatory, and melanin synthesis inhibitory activities of fruiting bodies of Gloeostereum incarnatum. In the free radical scavenging activities, the mushroom extracts showed good 1,1-diphenyl-2-picrylhydrazyl (DPPH) free radical scavenging and chelating activity on the ferrous ions compared with the positive control, BHT. The mushroom extract suppressed nitric oxide (NO) production in LPS-induced RAW 264.7 macrophage cells in dose dependant manners. Significant reduction of paw edema of rats were observed at 2~6 h after administration with 50 mg/kg of the methanol and hot-water extracts, which were comparable with treatment of 5 mg/kg of indomethacin, the positive control. The melanin synthesis of Melanoma B16/F10 cells treated with $100{\mu}g/mL$ of the methanol and hot water extracts decreased melanin concentration to 50% and 45% compared with the control, arbutin. Therefore, the experimental results showed that methanol and hot-water extracts of Gloeostereum incarnatum fruiting bodies might be used for good sources of anti-inflammatory, free radical scavenging, and skin whitening agents for human health.

• Journal of Digital Convergence
• /
• v.18 no.7
• /
• pp.397-403
• /
• 2020

This study was carried out to investigate the free amino acid and derivatives and phenolic acid and flavonoid compositions and contents of hot water and 95% ethanol extracts of Imperata cylindrica Beauvois var. koenigii root. The purpose of this study is to obtain basic data and to confirm their applicability as functional cosmetic and functional food ingredients on extracts. 15 kinds and 9 kinds of free amino acids were detected in both extracts, respectively. 5 kinds and 4 kinds of protein free-amino acid derivatives were detected in both extracts, respectively. Total phenol contents were 116.50 ± 0.06 and 140.10 ± 0.04 mg% in both extracts, respectively. The total flavonoid contents were 31.80 ± 0.03 and 43.90 ± 0.05 mg% in both extracts, respectively. 5 kinds and 6 kinds of phenolic acids were detected in both extracts, respectively. In the case of flavonoid analysis, no flavonoid compound was detected in the hot water extract while taxifolin was identified in the 95% ethanol extract. Based on the above results, the hot water and 95% ethanol extracts of I. cylindrica Beauvois var. koenigii root are rich in free amino acids, amino acid derivatives, phenolic acids and flavonoids which confirm their potential for applications in cosmeceuticals, nutricosmetics formulations and functional foods.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.03a
• /
• pp.119-125
• /
• 2004

Unsteady nonlinear wave motions on the free surface over a plane beach of constant slope are numerically simulated using a finite difference method in rectangular grid system. Two-dimensional Navier-Stokes equations and the continuity equation are used for the computations. Irregular leg lengths and stars are employed near the boundaries of body and free surface to satisfy the boundary conditions. Also, the free surface which consists of markers or segments is determined every time step with the satisfaction of kinematic and dynamic free surface conditions. Moreover, marker-density method is also adopted to allow plunging jets impinging on the free surface. The second-order Stokes wave theory and solitary wave theory are employed for the generation of waves on the inflow boundary. For the simulation of wave breaking phenomena, the computations are carried out with the plane beach of constant slope in surf zone. The results are compared with each other. The marker-density method is better then the hybrid method. Also they are compared with other existing experimental results. The Agreement between the experimental data and the computation results is good.

• Journal of Advanced Research in Ocean Engineering
• /
• v.2 no.2
• /
• pp.48-60
• /
• 2016

Accurate simulation of free-surface wave flows around a ship is very important for better hull-form design. In this paper, a computational fluid dynamics (CFD) code which is based on the open source libraries, OpenFOAM, was developed to predict the wave patterns around a ship. Additional anti-diffusion source term for minimizing a numerical diffusion, which was caused by convection differencing scheme, was considered in the volume-fraction transport equation. The influence of the anti-diffusion source term was tested by applying it to free-surface wave flow around the Wigley and KCS model ships. In results, the wave patterns and hull wave profiles of the Wigley and KCS model ships for various anti-diffusion coefficients showed quite close patterns. While, the band width of the water volume-fraction values between 0.1 to 0.9 at the Wigley and KCS model hull surfaces was narrowed by considering the anti-diffusion term. From the results, anti-diffusion source term decreased free-surface smearing.