• 한국환경농학회지
• /
• 제15권4호
• /
• pp.479-487
• /
• 1996

$SO_2$에 대한 양버즘나무의 내성을 증대시키고자 생장왜화제인 uniconazole을 토양주입하고, 그 내성 기작을 superoxide dismutase와 peroxidase의 역할과 관련하여 조사했던 바 다음과 같은 결과를 얻었다. Uniconazole은 농도가 높아질 수록 간장, 엽면적 및 T/R율(率)을 현저하게 감소시키고, 엽록소 농도와 superoxide dismutase 및 peroxidase활성을 현저하게 증가시켜 $SO_2$ 처리에 의한 가시피해를 유의성있게 경감시켰다. Diethyldithiocarbamate를 엽면살포하였을때, superoxide dismutase와 peroxidase 활성이 현저하게 불활성화되어 $SO_2$ 처리에 의한 가시피해(可視被害)가 증가되었으며 uniconazole 처리에 의해 증대되었던 $SO_2$ 내성은 diethyldithiocabamate 처리에 의하여 다시 감소되었다. 이상과 같이 uniconazole은 식물생장의 왜화(矮化)에 의한 조직의 치밀화 이외에 SOD와 POD의 활성증대를 통해 $SO_2$에 대한 내성을 증대시킨 것으로 판단된다.

• 한국기계가공학회지
• /
• 제10권5호
• /
• pp.131-136
• /
• 2011

Many researchers are recently studying about Electroactive polymer(EAP). But it has a physical limitation, because of property of material. Carbon nanotube(CNT) is known as the promising material which has excellent electro-mechanical characteristics and is mostly defect-free. It is expected that a successful synthesis of CNT and Nafion known as a primary material for IPMC would make a great improvement on its electro-mechanic feature. This study focuses on the method of synthesis of CNT with Nafion which improves electro-mechanical characteristic. To come up with mechanical dispersion with Nafion and Isopropyl Alcohol(IPA), we dispersed Single-walled carbon nanotubes(SWCNTs). For a uniformly layer of CNT, we used a spray gun on a hot plate by a simplified method. We fabricated a disperse SWCNT/Nafion composite uniformly. Through the use of the E-beam evaporator to form an uniform electrode layer, we consummated the IPMC actuator. This result shows improving 1.5 times mechanical properties about driving force in IPMC.

• 한국정밀공학회지
• /
• 제28권2호
• /
• pp.193-201
• /
• 2011

Clamp type transferring mechanism for package substrate's wet processes was newly developed instead of conventional roller type transferring mechanism. Clamp type transferring mechanism has the advantages of reducing the panel deflection and of minimizing the contact problem between the panel and the transferring mechanism. Individual clamp of the mechanism has two distinct mechanical functions which are perfectly fixing a panel during the transferring and generating adequate tension for the panel. To determine the mechanical parameters of the clamp, panel deflection simulation was conducted and the result was verified by the panel deflection measurement. Also, fixing angle of a clamp could be determined by the free body force analysis of individual clamp. Finally clamp type transferring mechanism was actually manufactured and the transferring performance was verified during the water spraying condition of the package substrate's wet processes.

• 한국해양공학회지
• /
• 제23권1호
• /
• pp.67-73
• /
• 2009

This study presents the results of a slamming experiment using a pneumatic cylinder. The employment of the pneumatic cylinder showed a relatively good repeatability when the results were compared with those of other slamming devices. The experiment was done for various incident angles. An air pocket was believed to cause a reduction in the magnitude of the impact pressure with an incident angle of $0^{\circ}$ for the water entry. A high speed camera was used in an attempt to locate the time of the contact between the bottom of the specimen and the free surface. It seemed that the maximum pressure occurred before the water contacted the bottom of the specimen.

• 한국분무공학회지
• /
• 제11권3호
• /
• pp.176-189
• /
• 2006

In the present study, capability of improving the liquid atomization of a high-speed liquid jet by using wall impingement is explored, and its application to a jet engine atomize. is demonstrated. Water is injected from a thin nozzle. The liquid jet impinges on a wall positioned close to the nozzle exit, forming a liquid film. The liquid film velocity and the SMD were measured with PDA and LDSA, respectively. It was shown that the SMD of the droplets was determined by the liquid film velocity and impingement angle, regardless of the injection pressure or impingement wall diameter. When the liquid film velocity was smaller than 300m/s, a smaller SMD was obtained, compared with a simple free jet. This wall impingement technique was applied to a conventional air-blasting nozzle for jet engines. A real-size air-blasting burner was installed in a test rig in which three thin holes were made to accommodate liquid injection toward the intermediate ring, as an impingement wall. The air velocity was varied from 41 to 92m/s, and the liquid injection pressure was varied from 0.5 to 7.5 MPa. Combining wall impinging pressure atomization with gas-blasting produces remarkable improvement in atomization, which is contributed by the droplets produced in the pressure atomization mode. Comparison with the previous formulation for conventional gas-blasting atomization is also made, and the effectiveness of utilizing pressure atomization with wall impingement is shown.

• 한국염색가공학회지
• /
• 제20권1호
• /
• pp.1-7
• /
• 2008

The study has attempted to introduce a new coating than the conventional standardized method of spray, padding and roll coating. The study has focused on finding condition for separating water and organic layer in marble bath and surface effects according to kind of raw hide. It was found that dyestuff-free was to be used in water layer and the input amount of initial insoluble pigment to be added in marble bath should be adjusted following the change of surface area of the marble bath in order to get efficient marble effect while preventing coagulation of water and organic layers. Eventually, amorphous high value-added leather could be obtained treated in process other than the conventional standardized method. Even raw hides of low grades($C{\sim}E$ grades) could be processed into amorphous marble effect that could conceal or shield surface scratches by the colorant, which eventually eliminated necessity of using excessive amount of chemicals in the coating process leading to achieving high quality marble leather of natural look.

• 한국작물학회지
• /
• 제50권3호
• /
• pp.191-196
• /
• 2005

이 실험은 보리의 붉은곰팡이병에 대한 정밀하고 효율성이 높은 검정체계를 확립하고, 이를 토대로 저항성 품종을 선발하고자 실시하였다. 이를 위해서 온$\cdot$습도 조절이 가능한 붉은곰팡이병 전용 습실 검정상을 제작하여 포트 재배한 식물체에 3개의 다른 접종시기별(출수기, 출수후 3일, 출수후 5일)로 SCK-O4 균주의 분생포자 현탁액 $5.0\times10^5$ macroconidia $mL^{-1}$를 각각 접종하고 4개의 다른 기간 동안 습실처리(1, 3, 5, 7일)를 하여 각 처리별 이병 정도를 평가하였다. 또한 절단이 삭검정법을 통한 대량검정법도 검토하였다. 1. 습실 검정상 내에서의 붉은곰팡이병 발병률은 접종시기에 따라 차이를 보이지 않았으나, 습실처리기간에 따라서는 유의한 차이를 보였다. 2.습실 검정상을 이용한 붉은곰팡이병의 저항성 검정은 출수기에 접종하고 습실 검정상 내에서 7일간 유지하여 판정하는 것이 가장 효율적이었다. 3. 포트검정법과 절단이삭검정법의 검정방법간 발병 정도는 고도로 유의한 정의 상관$(r=0.892^{***})$을 보였다. 4. 저항성 품종은 진광보리, 부흥, Atahualpha92, Chevron-b, Gobernadora-d 및 MNBrite-c 등이 선발되었으며, 이들 품종은 2개의 검정시기에서 일정한 저항성을 나타내었다.

• 한국식품과학회지
• /
• 제28권4호
• /
• pp.696-701
• /
• 1996

참치통조림 업계에서 부산물로 얻어지는 자숙액을 효율적으로 이용하기 위해 효소가수분해하여 분말엑기스를 제조하고 제조된 분말엑기스의 정미성분을 검토하였다. 두부와 내장을 제거한 2kg이하의 참치 2.3톤을 $93-95^{\circ}C$에서 45분간 증자하여 유출되는 약 $6^{\circ}brix$의 자숙액을 효소처리(pH; 6.19, 온도; $50^{\circ}C$, 효소농도; 0.5%, 처리시간; 1시간)하였다 이를 $80-85^{\circ}C$에서 5분간 처리하여 효소를 실활시키고 활성탄을 가하여 감압, 여과한 다음 이 여액 500ml 분무건조하여 백색의 분말엑기스 18 g을 얻었다. 이 분말엑기스의 유리아미노산 함량은 2,711.5 mg/100g이었고 이중 taurine이 19.4%를 차지하여 가장 많았고 다음으로 glutamic acid (13.8%), phenylalanine (11.7%) 및 alanine (10.5%)의 순으로 많았다. 이들 4종의 아미노산이 전체 유리 아미노산의 55.4%를 차지하였다. 한편 구성 아미노산의 함량은 30,758.1 mg/100g이었으며 이중 glutamic acid가 13.1%로 가장 많았다. 핵산관련물질 중에서는 inosine이 $76.29\;{\mu}mole/g$으로서 양적으로 가장 많았다. 엑기스 질소중 양적으로 가장 많은 것은 핵산관련물질 질소로 전 엑스분 질소의 41.2%를 차지하였으며 다음으로 유리 아미노산 질소의 순이었다. TMAO와 TMA는 미량 존재하였으며, betaine은 72.2 mg/100g으로서 전엑스분 질소의 4.9%를 차지하였고, 총 creatinine은 전엑스분 질소의 3.5%을 차지하였다 omission test 결과 분말엑기스의 맛에는 유리 아미노산, 유기산, 핵산관련물질의 순으로 기여도가 높았고, 유리 아미노산은 지미의 주된 물질임과 동시에 자극성의 맛이나 신맛을 완화시키는 역할을 하는 것으로 판단되었다.

• 한국수산과학회지
• /
• 제20권6호
• /
• pp.520-528
• /
• 1987

배소김의 열처리조건에 따른 성분의 변화와 저장중의 색소, 지방산, 유리아미노산, 색도, 갈변등의 변화를 측정하여 품질의 안정성을 검토한 결과를 요약하면 다음과 같다. 1. 열처리중 biliprotein 색소는 극히 불안정하였고, chlorophyll a 보다는 carotenoid가 비교적 안정하였다. 색소의 안정도는 열처리온도와 시간에 따라 다르나 chlorophyll과 carotenoid는 $60^{\circ}C$, 90분 ; $80^{\circ}C$, 60분 ; $100^{\circ}C$, 10분 ; $150^{\circ}C$, 5분 ; $200^{\circ}C$, 3분 정도의 열처리 하에서는 $90\%$ 이상의 잔존율을 보였다. Hunter color 값은 열처리 정도에 따라 L 및 a 값의 증가, b값의 감소가 뚜렷하였다. 지방산은 위에 적은 정도의 열처리조건에서는 크게 영향을 받지 않고 안정하였다. 2. 배소김의 저장중에는 열처리에 의한 안정화효과, 조미액의 항산화성, 살포한 기름의 보호역활동에 의하여 chlorophyll a, carotene지 등은 안정화 하였고 지방산은 조미배소김의 경우 $\alpha_w0.2$, 50일이상 저장한후에도 극히 안정함을 보였으나 기름살포 배소김의 장기 저장에서는 지질의 열화를 가져왔다. 3. 유리아미노산에 있어서는 열화처리중에 Thr, Gly 등은 $80\%$ 이상의 손실을 보였고 저장중에는 안정하여 기름살포김의 경우 $\alpha_w0.2$, 100일간 저장후 $80\%$ 이상이 잔존하였다. 그 중 Glu의 손실이 가장 심하였다. 기름의 살포는 유리아미노산의 안정화에 유효한 것으로 보였다.

• 한국유기농업학회지
• /
• 제8권1호
• /
• pp.89-99
• /
• 1999

To do mass multiplication of plug seedlings in potatoes, apical stem cuttings originated from virus-free microtubers were cut to one-two internodes and transplanted into the plug-tray. After 10days, we applied Chitosan and Wood Extraction on rooting and tuber formation of plug seedlings. To improve field adaptability of plug seedlings, rooted cuttings with a height of 20cm after 20days of cutting were transplanted ito the fields, We applied 500~2000ppm Chitosan on growth characteristics and tuber formation of that. The above and underground growths, such as plant height and number of leaves were significantly more vigorous after treatment with 500~1,000ppm Chitosan and 2,000ppm Wood Extraction, the spray treatment was carried out five times at intervals of four days after ten days of transplanting. T-N, K, P, Mg and Na, were higher as the concentrations of chitosan and Wood Extraction were higher. The growth and tuber yield in plug seedlings planting plot and seed potatoes planting plot were effectively highter as foliar application of Chitosan(500~2,000ppm) was done after planting the plot. T-N content in leaves and tuber was higher as the concentration of Chitosan was high. A similar tendency was shown in K, P and Mg. In the small tuber(under 30g), the number of tubers and tuber yield were relatively increased in the seed potatoes planting plot, but the large tubers(over 80g) yield was higher in the plug seedlings planting plot, and in order to increase tuber yield in plug seedlings it was necessary to add plant density to the field.