• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.865-875
• /
• 1998

The purpose of this study was to investigate the angle formed by the Sella-Nasion(SN) plane and Frankfort-Horizontal(FH) plane and evaluate the correlation and difference of the FH plane to other horizontal reference planes. Through this study we hope to present a basis for selecting a horizontal reference plae which can be implemented in cephalometric studies and in surgical orthodontic treatment planning. 600 subjects were chosen following a clinical examination md lateral cephlometric X-rays were taken. According to cephalometric analysis the subjects were classified into 3 groups , Skeletal Class I malocclusion or normal occlusion group(male 50, female 50), Skeletal Class II malocclusion group(male 50, female 65) and Skeletal Class III malocclusion group(male 50, female 50). The results were as follows. 1. The angle formed by the SN plane and FH plane showed no difference among the malocclusion groups, but there was a significant sex difference. For males the angle measured was $7.47^{\circ}{\pm}2.40^{\circ}$ whereas for females it was $8.93^{\circ}{\pm}2.72^{\circ}$. 2. The angle formed by the SN plane or FH plane and Mandibular plane was higher in females for all malocclusion groups. This angle in the Skeletal Class I malocclusion group was lower than in the other two groups. 3. There was no difference among the sexes or malocclusion groups considering the angle formed by the FH plane and Palatal plane. 4. The genial angle in the Skeletal Class III malocclusion group was higher than in the Skeletal Class I and Class II malocclusion groups in both sexes.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.40 no.3
• /
• pp.123-129
• /
• 2014

Objectives: The aim of this study was to verify the concordance of the measurement values when the same cephalometric analysis method was used for two-dimensional (2D) cephalometric radiography and three-dimensional computed tomography (3D CT), and to identify which 3D Frankfort horizontal (FH) plane was the most concordant with FH plane used for cephalometric radiography. Materials and Methods: Reference horizontal plane was FH plane. Palatal angle and occlusal plane angle was evaluated with FH plane. Gonial angle (GA), palatal angle, upper occlusal plane angle (UOPA), mandibular plane angle (MPA), U1 to occlusal plane angle, U1 to FH plane angle, SNA and SNB were obtained on 2D cephalmetries and reconstructed 3D CT. The values measured eight angles in 2D lateral cephalometry and reconstructed 3D CT were evaluated by intraclass correlation coefficiency (ICC). It also was evaluated to identify 3D FH plane with high degree of concordance to 2D one by studying which one in four FH planes shows the highest degree of concordance with 2D FH plane. Results: ICCs of MPA (0.752), UOPA (0.745), SNA (0.798) and SNB (0.869) were high. On the other hand, ICCs of gonial angle (0.583), palatal angle (0.287), U1 to occlusal plane (0.404), U1 to FH plane (0.617) were low respectively. Additionally GA and MPA acquired from 2D were bigger than those on 3D in all 20 patients included in this study. Concordance between one UOPA from 2D and four UOPAs from 3D CT were evaluated by ICC values. Results showed no significant difference among four FH planes defined on 3D CT. Conclusion: FH plane that can be set on 3D CT does not have difference in concordance from FH plane on lateral cephalometry. However, it is desirable to define FH plane on 3D CT with two orbitales and one porion considering the reproduction of orbitale itself.

• Journal of Korean Dental Science
• /
• v.14 no.1
• /
• pp.26-31
• /
• 2021

Purpose: This study aimed to find a correlation between the occlusal plane and two reference planes that are frequently used in semi-adjustable articulators. Materials and Methods: Sixty-two males and fifty females with normal articulation were recruited and the lateral cephalograms of these patients were taken. The angles between the Frankfort horizontal (FH) and the occlusal planes, the angles between the gnathologic and the occlusal planes, and the angles between the FH and gnathologic planes were measured on the lateral cephalograms. Result: The mean angles between the FH and the occlusal planes was 8.29°±3.62°, with 8.88°±3.09° and 7.63°±4.10° for male and female patients, respectively. The mean angles between the gnathologic and the occlusal planes was 2.77°±3.62°, and the angle between the FH and the gnathologic planes was 5.52°±3.62°. No significant differences were found in the measured angles between the male and female patients (P>0.05). Conclusion: Different guidance angles may be applied to articulators for prosthodontic restoration, depending on the reference planes that the articulators use.

• The korean journal of orthodontics
• /
• v.29 no.2 s.73
• /
• pp.251-265
• /
• 1999

Various types of horizontal reference planes are used for diagnosis, treatment planning and evaluation of treatment results. But these reference Planes lack accuracy and repro-ducibility, and are mainly for Caucasian. Unlike the adult patients who have completed growth, the horizontal reference planes for growing children may change continuously during growth. Therefore this must be considered in selecting the horizontal reference plane. The purpose of this study was to Investigate the angle formed by the Sella-Nasion(SN) plane and Frankfort-Horizontal(FH) plane and evaluate the angle formed by FH plane and other horizontal reference planes in relation to different skeletal maturity and malocclusion types. 540 subjects with no orthodontic treatment history were chosen, and hand -wrist X-rays and lateral cephalometric X-rays were taken. According to SMA(Skeletal Maturity Assessment) of hand-wrist X-rays, the subjects were classified into 3 skeletal maturity groups : SMI 1-4 for group A, SMI 5-7 for group B and SMI 8-11 for group C. A second classification was made according to cephalometric analysis of lateral cephalograms. The subjects were classified into 3 malocclusion groups : Skeletal Class I, II and III malocclusion group. 10 measurements were evaluated. The results were as follows. 1. The angle formed by the SN plane and FH plane showed no difference among skeletal maturity groups, malocclusion groups, and between .sexes. 2. The angles formed by the SN plane and FH plane were $8.27^{\circ}{\pm}2.31^{\circ}$ for males and $8.59^{\circ}{\pm}2.24^{\circ}$ for females. The average value for females and males was $8.42^{\circ}{\pm}2.28^{\circ}$. 3. The angle formed by the FH plane and palatal plane was almost constant showing no difference among skeletal maturity groups, malocclusion groups, and between sexes($1.09^{\circ}{\pm}3.21^{\circ}$).

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.20 no.1
• /
• pp.19-27
• /
• 1990

The primary objective of this study was to analyze the hard and soft tissue profile and comparison of the both sexes in Korean adults using roentgenocephalometry. The subjects were 122 males and 116 females from 18 to 22 years of age selected on the basis of their excellent occlusion and harmonious profile. It was an investigation about the interrelationships in the angles which consisted of Frankfort horizontal plane (FH plane), Sella Nasion plane (SN plane), Nasal floor plane (NF plane) and Mandibular plane (Md plane) as reference planes, and of the axial inclinations of the upper anterior tooth to Nasal floor plane (NF Plane) and of the lower anterior tooth to Mandibular plane (Md Plane). Among the 14 categories estabilishied on the soft tissue land marks, the 6 categories were studied for the relationship to Frankfort horizontal plane (FH Plane), and the 8 categories were studied for the soft tissue contour. The results were as follows: 1. Among 8 measured angles in the hard tissue, the angle of FH-Md, NF-Md and SN-Md were greater in females than in males. 2. The axial inclinations of the anterior teeth to NF Plane and Md plane were slightly greater in males than In females. 3. Among 14 measured angles in the soft tissue, the angles of G-Sn-P and E-Pog-Sn were greater in males, and FH-G-Sn, GㆍSn-Sn. Pog and Pog-Sn-P were greater in females. 4. In males, the variability of measured values in both lips region were high.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.39 no.2
• /
• pp.71-76
• /
• 2013

Objectives: In three-dimensional computed tomography (3D-CT), the cant is evaluated by measuring the distance between the reference plane (or line) and the tooth. The purpose of this study was to determine the horizontal skeletal reference plane that showed the greatest correlation with clinical evaluation. Materials and Methods: The subjects were 15 patients who closed their eyes during the CT image taking process. The menton points of all patients deviated by more than 3 mm. In the first evaluation, clinical cant was measured. The distance from the inner canthus to the ipsilateral canine tip and the distance from the eyelid to the ipsilateral first molar were obtained. The distance between the left and right sides was also measured. In the second evaluation, skeletal cant was measured. Six reference planes and one line were used for the evaluation of occlusal cant: 1) FH plane R: Or.R - Or.L - Po.R; 2) FH plane L: Or.R - Or.L - Po.L; 3) F. Ovale plane R: Rt.F.Ovale - Lt.F.Ovale - Or.R; 4) F. Ovale plane L: Rt.F.Ovale - Lt.F.Ovale - Or.L; 5) FZS plane R: Rt.FZS - Lt.FZS - Po.R; 6) FZS plane R: Rt.FZS - Lt.FZS - Po.L, and; 7) FZS line: Rt.FZS - Lt.FZS. Results: The clinical and skeletal cants were compared using linear regression analysis. The FH plane R, FH plane L, and FZS line showed the highest correlation (P<0.05). Conclusion: The FH plane R and FH plane L are the most appropriate horizontal reference plane in evaluation of occlusal cant on 3D-CT.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.1
• /
• pp.58-66
• /
• 2013

PURPOSE. The purpose of this study was to decide the most appropriate point on tragus to be used as a reference point at time of marking ala tragus line while establishing occlusal plane. MATERIALS AND METHODS. The data was collected in two groups of subjects: 1) Dentulous 2) Edentulous group having sample size of 30 for each group with equal gender distribution (15 males, 15 females each). Downs analysis was used for base value. Lateral cephalographs were taken for all selected subjects. Three points were marked on tragus as Superior (S), Middle (M), and Inferior (I) and were joined with ala (A) of the nose to form ala-tragus lines. The angle formed by each line (SA plane, MA plane, IA plane) with Frankfort Horizontal (FH) plane was measured by using custom made device and modified protractor in all dentulous and edentulous subjects. Also, in dentulous subjects angle between Frankfort Horizontal plane and natural occlusal plane was measured. The measurements obtained were subjected to the following statistical tests; descriptive analysis, Student's unpaired t-test and Pearson's correlation coefficient. RESULTS. The results demonstrated, the mean angle COO (cant of occlusal plane) as $9.76^{\circ}$, inferior point on tragus had given the mean angular value of IFH [Angle between IA plane (plane formed by joining inferior point-I on tragus and ala of nose- A) and FH plane) as $10.40^{\circ}$ and $10.56^{\circ}$ in dentulous and edentulous subjects respectively which was the closest value to the angle COO and was comparable with the values of angle COO value in Downs analysis. Angulations of ala-tragus line marked from inferior point with occlusal plane in dentulous subject had given the smallest value $2.46^{\circ}$ which showed that this ala-tragus line was nearly parallel to occlusal plane. CONCLUSION. The inferior point marked on tragus is the most appropriate point for marking ala-tragus line.

• The korean journal of orthodontics
• /
• v.51 no.3
• /
• pp.166-178
• /
• 2021

Objective: To investigate dimensional changes in regional pharyngeal airway spaces after premolar extraction in bimaxillary skeletal protrusion (BSP) patients according to vertical skeletal pattern, and to further identify dentoskeletal risk factors to predict posttreatment pharyngeal changes. Methods: Fifty-five adults showing BSP treated with microimplant anchorage after four premolar extractions were included in this retrospective study. The subjects were divided into two groups according to the mandibular plane steepness: hyperdivergent (Frankfort horizontal plane to mandibular plane [FH-MP] ≥ 30) and nonhyperdivergent groups (FH-MP < 30). The control group consisted of 20 untreated adults with skeletal Class I normodivergent pattern and favorable profile. Treatment changes in cephalometric variables were evaluated and compared. The association between posttreatment changes in the dentoskeletal and upper airway variables were analyzed using linear regression analysis. Results: The BSP patients showed no significant decrease in the pharyngeal dimensions to the lower level in comparison with controls, except for middle airway space (MAS, p < 0.01). The upper airway variable representing greater decrease in the hyperdivergent group than in the nonhyperdivergent group was the MAS (p < 0.01). Posttreatment changes in FH-MP had negative correlation with changes in MAS (β = -0.42, p < 0.01) and inferior airway space (β = -0.52, p < 0.01) as a result of multivariable regression analysis adjusted for sagittal skeletal relationship. Conclusions: Decreased pharyngeal dimensions after treatment in BSP patients showed no significant difference from the normal range of pharyngeal dimensions. However, the glossopharyngeal airway space may be susceptible to treatment when vertical dimension increased in hyperdivergent BSP patients.

• Journal of dental hygiene science
• /
• v.20 no.2
• /
• pp.118-124
• /
• 2020

The purpose of this comparison of case reports is to introduce the results of the application of new devices for the management of growing Class III malocclusions in children. Two 8-year-old boys had a chief complaint of anterior crossbite. Anterior crossbite correction using a tandem traction bow appliance (TTBA) or a Carriere Motion 3D Class III appliance with a Transforce appliance was planned. By comparing cephalometric radiographs before and after treatment, changes in skeletal growth and incisor inclination to the Frankfort horizontal (FH) plane could be measured. Both devices increased SNA and ANB angles, N-I Pg-A, U1 to SN, and U1 to FH. Both appliances improved facial features and resolution of anterior crossbite. The TTBA and Carriere Motion 3D Class III appliance had similar effects when applied as early treatment for growing mesio-occlusions and anterior crossbite in two boys. However, long-term outcome assessments and well-designed comparative studies are still required.

• The korean journal of orthodontics
• /
• v.50 no.1
• /
• pp.3-12
• /
• 2020

Objective: This study compared three prominent midsagittal planes (MSPs) to identify the MSP that best approximates the true symmetrical MSP. Methods: Forty-three patients (mean age, 23.0 ± 8.20 years) were grouped as follows: group 1 consisted of 10 patients with skeletal Class I and a menton (Me) deviation of < 2 mm; group 2, 11 patients with skeletal Class III and a Me deviation < 2 mm; group 3, nine patients with skeletal Class III and a Me deviation of 2 to less than 4 mm; and group 4, 13 patients with skeletal Class III and an Me deviation ≥ 4 mm. The candidate MSPs were established by three-dimensional (3D) cone beam computed tomography (CBCT) reorientation methods (RMs): (1) the MSP perpendicular to the Frankfort horizontal (FH) plane while passing through the crista galli and basion; (2) the MSP including the nasion, incisive foramen, and basion; (3) the MSP including the nasion, anterior nasal spine, and posterior nasal spine. The mean absolute distances (MADs) to the MSPs were calculated from the coordinates of 1,548 points on 129 CBCT images. The differences in the values of the 3D coordinates among RMs were compared. Results: The MADs of the three RMs showed significant differences (p < 0.05). Most of the differences in values of the coordinates were not significant among RMs. Conclusions: Although the differences in distance among the three MSPs were minor, the MSP perpendicular to the FH plane while passing through the crista galli and basion best approximated the true symmetrical MSP.