• Korean Journal of Legislative Studies
• /
• v.24 no.2
• /
• pp.39-66
• /
• 2018

This paper analyzes the structures and issues of 2018 Korean local elections based on the author's observations on the electoral processes. Even if this paper does not follow a traditional statistical method, it provides the interpretative meanings of 2018 local elections by utilizing an expert's observations of campaign processes. This result of 2018 election can be summarized into two analytical frames. In terms of electoral competition structure, three key factors, such as presidential approval rating, party competition structure, ideological spectrum, tend to affect the winning of governing party. In the light of election issue, the inter-Korean summit, the Washington-Pyeongyang summit, Incheon deprecating remark were positive to the vote gains of governing party, but the negative campaign, the drucking scandal and the swing voters were found not to be significant. The local election in Korea tends to show dual meanings, a proxy war of national-level politics and a composition process of local government. This paper found that the 2018 election has dual meanings at the same time, in a sense that it is the punishment of the ex-governing party's wrongdoing and the power change of local government.

• The Journal of Korean Philosophical History
• /
• no.53
• /
• pp.131-163
• /
• 2017

We were already thrown into the modern by the Japanese before reflecting the relevance of modernization and acceptance, and the value of the modern was postponed. The late period of Chosun, people sank into a state of torpor and traditional culture and ideology has caused people to have a negative perception of modern times.Modern times, however, are defined in the relative concept of tradition and modernity in the history of modern times. In order to understand the modern era and its origin, it is necessary to look squarely at the face of modernity. Failure of modern times is a failure of traditional succession.So, if we analyze the causes of the failure of the traditional heritage, why can't we see some of the reasons why we perceive it as a failure? In this thesis, it seeks to understand the diverse views of the traditional elites of the journal and the newspaper, which are published in the traditional education of the journal, and are looking at a variety of views. Moreover, we should seek to explore the traditional elements of the new tradition by discussing the aspects of the educational problems caused by the cause of the accidental break and the educational problems caused by its results.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.12 no.2
• /
• pp.21-34
• /
• 2002

In this paper we propos a new hardware architecture of modular exponentiation using a division chain method which has been proposed in (2). Modular exponentiation using the division chain is performed by receding an exponent E as a mixed form of multiplication and addition with divisors d=2 or $d=2^I +1$ and respective remainders r. This calculates the modular exponentiation in about $1.4log_2$E multiplications on average which is much less iterations than $2log_2$E of conventional Binary Method. We designed a linear systolic array multiplier with pipelining and used a horizontal projection on its data dependence graph. So, for k-bit key, two k-bit data frames can be inputted simultaneously and two modular multipliers, each consisting of k/2+3 PE(Processing Element)s, can operate in parallel to accomplish 100% throughput. We propose a new encoding scheme to represent divisors and remainders of the division chain to keep regularity of the data path. When it is synthesized to ASIC using Samsung 0.5 um CMOS standard cell library, the critical path delay is 4.24ns, and resulting performance is estimated to be abort 140 Kbps for a 1024-bit data frame at 200Mhz clock In decryption process, the speed can be enhanced to 560kbps by using CRT(Chinese Remainder Theorem). Futhermore, to satisfy real time requirements we can choose small public exponent E, such as 3,17 or $2^{16} +1$, in encryption and verification process. in which case the performance can reach 7.3Mbps.

• The Journal of the Korea Contents Association
• /
• v.21 no.1
• /
• pp.552-560
• /
• 2021

Currently, the domestic aquaculture industry is pursuing smartization, but it is still proceeding with human subjective judgment in many processes in the aquaculture stage. The prerequisite for the smart aquaculture industry is to effectively grasp the condition of fish in the farm. If real-time monitoring is possible by identifying the number of fish populations, size, pathways, and speed of movement, various forms of automation such as automatic feed supply and disease determination can be carried out. In this study, we proposed an algorithm to identify the state of fish in real time using underwater video data. The fish detection performance was compared and evaluated by applying the latest deep learning-based object detection models, and an algorithm was proposed to measure fish object identification, path tracking, and moving speed in continuous image frames in the video using the fish detection results. The proposed algorithm showed 92% object detection performance (based on F1-score), and it was confirmed that it effectively tracks a large number of fish objects in real time on the actual test video. It is expected that the algorithm proposed in this paper can be effectively used in various smart farming technologies such as automatic feed feeding and fish disease prediction in the future.

• Journal of IKEEE
• /
• v.25 no.2
• /
• pp.243-251
• /
• 2021

In this paper, we propose a measurement technique of indoor location based on markerless applicable to AR. The proposed technique has the following originality. The first is to extract feature points and use them to generate local patches to enable faster computation by learning and using only local patches that are more useful than the surroundings without learning the entire image. Second, learning is performed through deep learning using the convolution neural network structure to improve accuracy by reducing the error rate. Third, unlike the existing feature point matching technique, it enables indoor location measurement including left and right movement. Fourth, since the indoor location is newly measured every frame, errors occurring in the front side during movement are prevented from accumulating. Therefore, it has the advantage that the error between the final arrival point and the predicted indoor location does not increase even if the moving distance increases. As a result of the experiment conducted to evaluate the time required and accuracy of the measurement technique of indoor location based on markerless applicable to AR proposed in this paper, the difference between the actual indoor location and the measured indoor location is an average of 12.8cm and a maximum of 21.2cm. As measured, the indoor location measurement accuracy was better than that of the existing IEEE paper. In addition, it was determined that it was possible to measure the user's indoor location in real time by displaying the measured result at 20 frames per second.

• Journal of Wetlands Research
• /
• v.23 no.2
• /
• pp.189-200
• /
• 2021

To improve the water quality of agricultural reservoirs, constructed wetlands are applied in many places. These are technologies that establish ecosystems and important design factors include water depth distribution, inflow and outflow, water flow distribution, hydraulic residence time, water quality treatment efficiency, aspect ratio, and the distribution of open water and covered water surfaces. For high efficiency during the operation of a constructed wetland, the design needs to be optimized and this requires consideration of the different types and length of the intake dam as well as the type and connection of wetland cells. Therefore, this study was conducted to investigate and suggest factors that needs to be considered during the design and for efficient operation measures through field surveys of 23 constructed wetlands that have been established and operated in agricultural reservoirs. Results of the field investigation shows that several sites were being operated improperly due to the malfunctioning or failure of the water level sensors, sedimentation in the intake dam, and clogging of the mechanical sluice frames. In addition, it was found that as the length of the inlet channel increases, the ecological disconnection between the intake dam upstream and the wetland outlet downstream also increases and was identified as a problem. Most of the wetlands are composed of 2 to 5 cells which can result to poor hydraulic efficiency and difficulty in management if they are too large. Moreover, it was found that the flow through a small wetland can be inadequate when there are too many cells due to excessive amounts of headloss.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.6
• /
• pp.561-571
• /
• 2020

Seven techniques widely used in the geodetic transformations have been reviewed and compared to figure out their theoretical characteristics. A series of numerical tests were performed about four data sets. This was followed by result analyses in terms of transformation residuals and accuracies together with some hypothesis testings based on the student-t distribution to confirm the statistical significance of the techniques. In the case of the transformation between the geodetic frames implemented in the same system, no statistical significance was revealed in the results of the 3D transformation techniques, even if the testing area becomes large as the Asia-Oceania continent. Among the 2D transformations, it was possible for the NTv2 grid modeling technique to deliver improved transformation accuracy. Finally, it was possible from the results analyzed in this study to propose the Helmert transformation to geodetic control points and the NTv2 technique to the 2D spatial data transformation of the geodetic systems.

• Smart Media Journal
• /
• v.9 no.4
• /
• pp.97-101
• /
• 2020

Using passive electric field sensor which operates in non-contact mode, we can measure the electric potential induced from the change of electric charges on a sensor caused by the movement of human body or hands. In this study, we propose a new method, which utilizes PLN induced to the sensor around the moving object, to detect one's hand movement and extract gesture frames from the detected signals. Signals from the EPS sensors include a large amount of power line noise usually existing in the places such as rooms or buildings. Using the fact that the PLN is shielded in part by human access to the sensor, signals caused by motion or hand movement are detected. PLN consists mainly of signals with frequency of 60 Hz and its harmonics. In our proposed method, signals only 120 Hz component in frequency domain are chosen selectively and exclusively utilized for detection of hand movement. We use FFT to measure a spectral-separated frequency signal. The signals obtained from sensors in this way are continued to be compared with the threshold preset in advance. Once motion signals are detected passing throng the threshold, we determine the motion frame based on period between the first threshold passing time and the last one. The motion detection rate of our proposed method was about 90% while the correct frame extraction rate was about 85%. The method like our method, which use PLN signal in order to extract useful data about motion movement from non-contact mode EPS sensors, has been rarely reported or published in recent. This research results can be expected to be useful especially in circumstance of having surrounding PLN.

• Journal of radiological science and technology
• /
• v.44 no.6
• /
• pp.645-653
• /
• 2021

With the recent development of precision medicine(Theranostics), interest and utilization of the quantitative function of SPECT/CT are increasing. This study aims to investigate the effect on the radioactivity concentration estimate by the increase or decrease in the total time of SPECT/CT imaging conditions. A standard image was obtained by the conditions of a total acquisition time of 600 sec(10 sec/f × 120 frames) by diluting ^99mTc 91.76 MBq in a cylindrical phantom filled with sterile water, and a comparative image was obtained by increasing the total acquisition time by -90%, -75%, -50%, -25%, +50%, +100%. The CNR, radioactive concentration estimate(cps/ml), and the variation rate(%) of the recovery coefficient(RC) were analyzed by measuring the overall coefficient of interest in each image. The results[CNR, Radiation Concentration, RC] by the change in the number of projections for each increase or decrease rate(-90%, -75%, -50%, -25%, +50%, +100%) of total acquisition time are as follows. [-89.5%, +3.90%, 1.04] at -90%, [-77.9%, +2.71%, 1.03] at -75%, [-55.6%, +1.85%, 1.02] at -50%, [-33.6%, +1.37%, 1.01] at -25%, [-33.7%, +0.71%, 1.01] at +50%, [+93.2%, +0.32%, 1.00] at +100%. and also The results[CNR, Radiation Concentration, RC] by the acquisition time change for each increase or decrease rate(-90%, -75%, -50%, -25%, +50%, +100%) of total acquisition time are as follows. [-89.3%, -3.55%, 0.96] at -90%, [-73.4%, -0.17%, 1.00] at -75%, [-49.6%, -0.34%, 1.00] at -50%, [-24.9%, 0.03%, 1.00] at -25%, [+49.3%, -0.04%, 1.00] at +50%, [+99.0%, +0.11%, 1.00] at +100%. Image quality(CNR) showed a pattern of change in proportion to the increase or decrease in the total acquisition time of SPECT/CT, but the result at quantitative evaluation showed a change of less than 5% in all experimental conditions, maintaining quantitative accuracy(RC less than 0.05) without much influence.

• The Journal of the Korea Contents Association
• /
• v.22 no.4
• /
• pp.352-364
• /
• 2022

As the types of actions and the magnitude of the required actions for environmental improvement get diversified, the necessity to develop effective messages is increasing. This research tries to develop proper messages with message characteristics of message framing and value orientation per different types of behaviors using a 2(message framing: gain/loss) × 2(value orientation: individual/social) × 2(magnitude of the requested behaviors: high/low). The results showed that framing and the magnitude of the requested behaviors had main effects on message attitudes and behavioral intentions. The gain framing showed more favorable effects than the loss framing, and the low magnitude of the requested behaviors showed better persuasive effects. According to the results of interaction effects, the gain framing showed higher behavioral intentions than the loss framing in the individual-oriented message, and there were no differences between the frames in the social-oriented message. When the magnitude of the requested behavior was high, the gain framing in the individual-oriented message was more favorable than the loss framing. On the other hand, when the magnitude of the requested behavior was low, the gain framing in the social-oriented message was more favorable. Although there were differences in the form of interactions by the magnitude of the requested behaviors, the individual-oriented gain framing message was found to be the most effective.