• The Journal of the Acoustical Society of Korea
• /
• v.39 no.1
• /
• pp.8-15
• /
• 2020

In this paper, we propose a frame synchronization algorithm for robust to the combined effects of large Doppler fluctuations and extended, time-varying multipath in the underwater acoustic communication. From the algorithm, we can recover a high timing error which is occurred from an acoustic propagation delay and uncertainty of oscillator between transmitter and receiver. In order to verify the performance of the synchronization algorithm, the lake trial results are used. The lake experiments are performed in a Gyeongcheonho located in Mungyeong-si, Gyeongsangbuk-do. We can see that the start position of frame is adjusted after the frame synchronization while the receiver moving.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.2
• /
• pp.31-37
• /
• 2009

This paper presents an efficient frame synchronization strategy with the identification of modulation type for Digital Video Broadcasting-Satellite second generation (DVB-S2). To detect the Start Of Frame (SOF) and identify a modulation mode at low SNR, we propose a new correlator structure and a low complexity Automatic Gain Controller (AGC). The proposed frame synchronization architecture can reduce about 93% multipliers and 89% adders compared with the direct implementation of the Differential - Generalized Post Detection Integration (D-GPDI) algorithm which is very complex and the proposed a low complexity AGC consists of only 5 multipliers and 3 adders. The proposed architecture has been thoroughly verified on the Xilinx Virtex II FPGA board.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.2
• /
• pp.183-189
• /
• 1987

The performance of frame synchronization can be represented by the values of three characteristic variables-average misframe interval, average syncloss detection time, average reframe time. In this paper, we have analyzed the performance of frame synchronization of the standardized 90Mb/s optical transmission system by Markov chain method, with the suggestion of an extended algorithm for performance improvement. Maximum average reframe time of 1.18 ms can be obtained by the suggested algorithm, which is compared with that of 2.28 ms for the existing algorithm.

• The KIPS Transactions:PartC
• /
• v.9C no.6
• /
• pp.953-960
• /
• 2002

Rel-time application programs have constraints which need to be met between media-data. It is client-leading synchronization that is absorbing variable transmission delay time and that is synchronizing by feedback control and palyout control. It is the important factor for playback rate and QoS if the buffer level is normal or not. This paper, The method of maintenance buffer normal state transmits in multimedia server by appling feedback of filtering function. And synchronization method is processing adaptive playout time for smooth presentation without cut-off while media frame is skip. When audio frame which is master media is in upper threshold buffer level we decrease play out time gradually, low threshold buffer level increase it slowly.

• Journal of Broadcast Engineering
• /
• v.18 no.6
• /
• pp.850-858
• /
• 2013

In this paper, we propose a method of frame synchronization for stereoscopic 3D video to solve the viewing problem caused by synchronization errors between a left video and a right video using the temporal frame difference image depending on the movement of objects. Firstly, we compute two temporal frame difference images from the left video and the right video which are corrected the vertical parallax between two videos using rectification, and calculate two horizontal projection profiles of two temporal frame difference images. Then, we find a pair of synchronized frames of the two videos by measuring the mean of absolute difference (MAD) of two horizontal projection profiles. Experimental results show that the proposed method can be used for stereoscopic 3D video, and is robust against Gaussian noise and video compression by H.264/AVC.

• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.109-114
• /
• 2015

Frame synchronization is achieved by correlation between received symbols and a preamble pattern which is periodically appended at a frame header. In this paper, we deal with a frame detection method complaint with satellite-based DVB-S2 system. In DVB-S2, frame synchronization is performed under the low signal-to-noise ratio(SNR), a large frequency offset which can be up to 20% of a symbol transmission rate and unknown modulation schemes ranging from QPSK to 32-APSK. In this environment, we propose a method combining differential correlation based on SOF and PLSC with an accumulated correlation method for the detection of frame structures. In addition, detection performances about mean acquisition time(MAT) and detection error probability are evaluated via computer simulations.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.124-131
• /
• 2014

This paper describes a design of an adaptive baseband modem based on TDMA(time division multiple access) with a relay protocol function for wireless personal area networks. The designed baseband modem is controlled by a master synchronization signal and can be configured a relay network up to 14 hops. For efficient data relay communications, the internal buffer design is optimized by implementing a priority memory bus controller to a single port memory. And the priority memory bus controller is also designed to minimize the number of synthesized logic gates. To implement the synchronization function of the narrowband TDMA relay communication, the number of gates has been reduced by dividing the frame synchronization circuits and the network slot synchronization circuits. By using these methods, the number of gates are used about 37%(34,000 gates) on Xilinx FPGA XC6SLX9 which has 90,000 gates. For the 1024-bit frame size with a 32-bit synchronization word, the communication reception rate is 96.4%. The measured maximum transmission delay of the designed baseband modem is 230.4 msec for the 14-hop relay communication.

• Journal of KIISE
• /
• v.42 no.11
• /
• pp.1332-1338
• /
• 2015

Recently, growing attention has been paid to multi-GPU rendering to support real-time high-quality rendering at high resolution. In order to attain high performance in real-time multi-GPU rendering, great care needs to be taken to reduce the overhead of data transfer among GPUs and frame composition. This paper presents a novel multi-GPU algorithm that greatly enhances split frame rendering with implicit query-based synchronization. In order to support implicit synchronization in frame composition, we further present a message queue-based scheduling algorithm. We carried out an experiment to evaluate our algorithm, and found that our algorithm improved rendering performance up to 200% more than previously existing algorithms.

• Journal of electromagnetic engineering and science
• /
• v.12 no.3
• /
• pp.223-225
• /
• 2012

In this paper, we develop a symbol/frame time and carrier frequency synchronization scheme for multi-carrier signaling in wireless mobile channels. The proposed scheme achieves simultaneous time synchronization and carrier frequency offset estimation. Simulation results show that the frequency offset of multiple sub-carrier spacings can be estimated and that performance is improved with robustness regardless of the cyclic prefix length.

• Journal of Advanced Navigation Technology
• /
• v.5 no.1
• /
• pp.45-53
• /
• 2001

We present the frame synchronization scheme using the FFT window position restoration algorithm appropriate for wireless OFDM systems under multipath fading environment. From the restoration of the synchronization parameters of previous several frames, the algorithm can extract the synchronization parameters for the next frames. To analyze the performance of the proposed algorithm, we compare the probability of synchronization failure under time and frequency domains, respectively. From the simulation results, one can see that the algorithm in the time domain shows better performance than in the frequency one, for the $E_b/N_o$ of 6.0dB or more.