• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1998년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring 1998
• /
• pp.180-187
• /
• 1998

In this paper the attention is focused on the modeling of reinforced concrete(R/C) wall structures to check effectiveness and reliability of elasto-plastic analysis. A relatively simple and reliable wall model is investigated, which is suitable to be efficiently incorporated in a practical pushover analysis of R/C wall structural systems. Two types of analogous frames have been examined to the stress analysis of shear walls. One analogous frame is similar to the widely used wide-column model, the second analogous frame also is called truss model which includes vertical edge column and braces. Further studies are needed to apply to nonlinear seismic analysis of building structure with R/C shear walls.

• Journal of Welding and Joining
• /
• 제35권2호
• /
• pp.1-5
• /
• 2017

Many microelectronic devices are miniaturizing the capacitance density and the size of the capacitor. Along with this miniaturization of electronic circuits, tantalum (Ta) capacitors have been on the market due to its large demands worldwide and advantages such as high volumetric efficiency, low temperature coefficient of capacitance, high stability and reliability. During a tantalum capacitor manufacturing process, arc welding has been used to weld base frame and sub frame. This arc welding may have limitations since the downsizing of the weldment depends on the size of welding electrode and the contact time may prevent from improving productivity. Therefore, to solve these problems, this study applies laser spot welding to weld nickel (Ni) and Au-Sn-Ni alloy using CW IR fiber laser with lap joint geometry. All laser parameters are fixed and the only control variable is laser irradiance time. Four different shapes, such as no melting upper workpiece, asymmetric spherical-shaped weldment, symmetric weldment, and, excessive weldment, are observed. This shape may be due to different temperature distribution and flow pattern during the laser spot cutting.

• 한국기계가공학회지
• /
• 제20권7호
• /
• pp.58-65
• /
• 2021

Research on general particle image velocimetry (PIV) has been conducted extensively, but studies on granular PIV are relatively insufficient. In addition, the parameters used for analyzing granular PIV need to be optimized. In this study, we analyzed the error of velocity measurements based on the interrogation area (64-192 pixel), frame per second (30-120 FPS), and video resolution [ultrahigh definition (UHD) and high definition (HD)] within the velocity range typically measured in hoppers. The estimated errors of the granular PIV were below 5%, which is generally acceptable. However, considering the data reliability, the flow velocity in the hopper could be measured with less than 5% error at 120 FPS or higher in the HD resolution and 30 FPS or higher in the UHD resolution.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 추계학술대회 논문집 전력기술부문
• /
• pp.288-290
• /
• 2007

This paper presents a visualization application using 3D-graphics for effective maintenance of power equipment. The maintenance algorithm implemented in the application is based on Condition-Based Maintenance (CBM) and Reliability -Centered Maintenance (RCM). The main frame of the developed application was made up based on Windows Application Programming Interface (API) and Microsoft Fundamental Classes (MFC). In order to develop the interactive 3D application, the WorldToolKit (WTK) library based on Open GL was used. Also Text-to-Speech (TTS) technology was used to enhance the efficiency of operators. The developed application can help the power system operators to intuitively recognize the present state and maintenance information of the equipment.

• 한국농공학회논문집
• /
• 제54권4호
• /
• pp.39-46
• /
• 2012

The objectives of this study is intended to analyze stresses using the boundary element method and probability analysis for agricultural structure. Loads and material properties are an important factor when analyzing the structure. Until now, designing structure, loads and material properties are applied deterministic value. However, load and material properties involve uncertainties due to those change probabilistic and deterministic methods could not consider uncertainties. To solve these problems, the reliability analysis based on probability properties scheme was developed. Reliability analysis is easy to approach to analysis frame structure, however it has limitation when solving plane stress strain problems a kind of agricultural structures. The BEM (Boundary Element Method) is able to analysis plane strain problems by boundary conditions. Thus, this study applied boundary element method to analysis plane strain problem, load and material properties as a probabilistic value to calculate the analytical model using Monte Carlo simulations were developed.

• Journal of Electrical Engineering and information Science
• /
• 제3권2호
• /
• pp.230-238
• /
• 1998

When size and shape of moving object have been changed, a correlator often accumulates walk-off error. A success of correlation-based tracking largely depends on choosing suitable window size and position and thus transferring the proper reference image to the next frame. For this, we propose the Adaptive Window Algorithm with Four-Direction Sizing Factors (AWA-FSF) for fast adjusting a reference region to enhance reliability of correlation-based image tracking in complex cluttered environments. Since the AWA-FSF is capable of adjusting a reference image size more rapidly and properly, we can minimize the influence of complex background and clutter. In addition, we can finely tune the center point of the reference image repeatedly after main tracking process. Thus we have increased stability and reliability of correlation-based image tracking. We tested performance of the AWA-FSF using 45 real image sequences made of over 3400 images and had the satisfied results for most of them.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1993년도 추계학술대회 논문집
• /
• pp.49-54
• /
• 1993

This paper discusses the reliability of solder joints of electronic devices on printed circuit board. Solder application is usually done by screen printing method for the bonding between outer leads of devices and thick film(Ag/Pd) pattern on Hybrid IC as wel1 as Cu lands on PCB. As result of thermal stresses generated at the solder joints due to the differences of thermal expansion coefficients between packge body and PCB, Micro cracking often occurs due to thermal fatigue failure at solder joints. The initiation and the propagate of solder joint crack depends on the environmental conditions, such as storage temperature and thermal cycling. The principal mechanisms of the cracking pheno- mana are the formation of kirkendal void caused by the differences in diffusion rate of materials, ant the thermal fatigue effect due to the differences of thermal expansion coefficient between package body and PCB. Finally, This paper experimentally shows a way to supress solder joints cracks by using low-${\alpha}$ PCB and the packages with thin lead frame, and investigates the phenomena of diffusion near the bonding interfaces.

• 전산구조공학
• /
• 제8권4호
• /
• pp.65-74
• /
• 1995

단조증가하중을 받는 평면골조의 비탄성해석을 위하여 개발된 기존의 직접해석법을 확장하여 반복하중에 적용하였다. 직접해석법을 위한 골조요소로서 비탄성 트러스와 비탄성 보요소의 두 가지 요소가 개발되었다. 제안된 방법의 정확성과 신뢰성을 기존의 Step-by-step 해석과 비교하여 검증하였다. 기존의 Step-by-step 해석은 하중증분의 크기에 따른 해의 불안정성, 단계별 오차의 누적, 하중증분의 세분에 따른 과다한 계산 등의 문제를 가지는데 비하여 직접해석법은 하중증분의 크기에 무관하게 해의 신뢰성이 보장되고 증분평형식을 사용하지 않으므로 단계별 오차의 누적이 없고 하중증분을 세분하지 않아도 되므로 해석비용이 적게 드는 이점이 있다.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2002년도 정기학술대회
• /
• pp.123-129
• /
• 2002

본 논문에서는 Regulator IC의 불량원인 규명을 통해 반도체 고장분석 방법 및 개선사례를 소개하고자 한다. 고장분석에 사용된 반도체 Package는 8Pin MSOP(Mini Small Outline Package)로, 시장 불량품을 분석한 결과 Regulator IC의 Stitch Bond에 Heel Crack이 발생하여 불안정한 출력을 발생시킴을 알 수 있었다. Stitch Bond Heel Crack의 원인은 Lead Frame부의 박리(Delamination)에 의해 열이나 진동 등의 외부 Stress가 직접 Stitch Bond에 가해져 Crack이 발생된 것으로, Reflow 재현시험을 통해 확인 할 수 있었다. 박리 발생에 의한 Stitch Bond Heel Crack 방지 대책으로 첫째, Bonding Type을 Stitch Bond 에서 Ball Bond로 변경하여 강도를 개선하고 둘째, PCB Layout 변경을 통해 외력이 직접 Regulator IC에 가해지지 않도록 하였다. 개선 결과 현재까지 시장에서 동일 불량은 발생하지 않았다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.427-433
• /
• 2002

An inverter-driven induction motor is usually adapted to the traction motor for a high speed drive system requiring safety, reliability, performance, compact size owing to the space and weight alloted for attaching to train, etc. and AC Traction motor for G7 train will be operated in the worst condition such as mechanical vibration, limited mounting space, severe thermal stress, inverter with non-sinusoidal voltage waveform, dust and so on. therefore, design procedure must be carefully carried out wi th considering the motor size, vibration and thermal expansion of rotor bars, insulation system, reliability of frame, as well as output characteristics. In this paper, we will inform the characteristics and design of the traction motor for G7 train and also analyze the test result of it.