• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.1
• /
• pp.41-51
• /
• 2010

In the research for driver assistance systems, traffic sign information to the driver must be a very important information. Therefore, the detection system of traffic signs located on the road should be able to handel real-time. To detect the traffic signs, color and shape of traffic signs is to use the information after images obtained using the CCD camera. In the road environment, however, using color information to detect traffic sings will cause many problems due to changes of weather and environmental factors. In this paper, to solve it, the candidate traffic sign regions are detected from road images obtained in a variety of the illumination changes using the HSI eign-color model. And then, using the invariant moment-based SVM classifier to detect traffic signs are proposed. Experimental results show that, traffic sign detection rate is 91%, and the processing time per frame is 0.38sec. Proposed method is useful for real-time intelligent traffic guidance systems can be applied.

• Journal of Mechanical Science and Technology
• /
• v.20 no.5
• /
• pp.710-716
• /
• 2006

Micro-PIV system with a high speed CCD camera is used to measure the flow field near the advancing meniscus of a water slug in microchannels. Image shifting technique combined with meniscus detecting technique is proposed to measure the relative velocity of the liquid near the meniscus in a moving reference frame. The proposed method is applied to an advancing front of a slug in microchannels with rectangular cross section. In the case of hydrophilic channel, strong flow from the center to the side wall along the meniscus occurs, while in the case of the hydrophobic channel, the fluid flows in the opposite direction. Further, the velocity near the side wall is higher than the center region velocity, exhibiting the characteristics of a strong shear-driven flow. This phenomenon is explained to be due to the existence of small gaps between the slug and the channel wall at each capillary corner so that the gas flows through the gaps inducing high shear on the slug surface. Simulation of the shape of a static droplet inside a cubic cell obtained by using the Surface Evolver program is supportive of the existence of the gap at the rectangular capillary corners. The flow fields in the circular capillary, in which no such gap exists, are also measured. The results show that a similar flow pattern to that of the hydrophilic rectangular capillary (i.e., center-to-wall flow) is always exhibited regardless of the wettability of the channel wall, which is also indicative of the validity of the above-mentioned assertion.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.24 no.2
• /
• pp.361-368
• /
• 1994

Radiographic planning is needed for implant placement in order to determine implant length, jaw bone volume, anatomical stucture and so on. Radiographic examination includes conventional radiography, conventional tomography and CT scan. The most accurate mesurement can be obtained from CT scan. For the cross-sectional view of mandible, CT scan reconstruction is generally needed. But the cross-sectional view of mandible can be reformed by personal computer. This study was performed to examine the clinical usefulness of reformed image using personal computer in comparison with CT scan reconstructed image. CT axial slices of 4 mandibles of 4 volunteers were used. Digital imaging system was composed of Macintosh Ⅱ ci computer, high resolution Sony XC-77 CCD camera, Quick Capture frame grabber board and 'NIH Image' program. Seven reconstructed cross-sectional images within CT machine(CT group) were obtained. And seven reformed cross-sectional images(PC group) after digitization of CT axial slices into the personal computer were obtained. PC group was compared with CT group in the objective and subjective aspects. The results were as follow: 1. Measurement of mandibular height & width in both group showed insignificant difference(P>0.05). 2. Subjective assessment of the mandibular canal in both group showed insignificant difference(P>0.05). 3. Image reformation using personal computer could provide panoramic view, which could not be obtained in CT scan reconstruction.

• Journal of Broadcast Engineering
• /
• v.15 no.3
• /
• pp.321-331
• /
• 2010

Most of multimedia video coding algorithms are lossy schemes and several kinds of spatial and temporal artifacts are inevitable. Flickering, which is the most typical coding artifact in time domain, is mainly due to fact that the quality of coded sequence fluctuates as the quantization parameter is adjusted for rate control. In this paper, we analyzed the effect of quality variation according to the characteristics of video sequence when the I-frames are periodically inserted. And we proposed the FR(Full Reference)-based assessment algorithm to measure the amount of flickering artifacts in the coded video. It is discovered that the flickering becomes critical when the level of quality is intermediate and is affected by the amount of detail or movement, the size of object, and camera parameters. The proposed measurement algorithm shows is well consistent with HVS(Human Visual System).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4C
• /
• pp.388-396
• /
• 2009

This paper proposes a new fire-smoke detection method by using extracted features from camera images and pattern recognition technique. First, moving regions are detected by analyzing the frame difference between two consecutive images and generate candidate smoke regions by applying smoke color model. A smoke region generally has a few characteristics such as similar color, simple texture and upward motion. From these characteristics, we extract brightness, wavelet high frequency and motion vector as features. Also probability density functions of three features are generated using training data. Probabilistic models of smoke region are then applied to observation nodes of our proposed Dynamic Bayesian Networks (DBN) for considering time continuity. The proposed algorithm was successfully applied to various fire-smoke tasks not only forest smokes but also real-world smokes and showed better detection performance than previous method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1834-1843
• /
• 2016

DVRs are the most common recording and displaying devices used for surveillance. Video compression plays a key role in DVRs for saving storage; the video compression standard, H.264/AVC, has recently become the dominant choice for DVRs. DVRs require various display modes, such as fast-forward, backward play, and pause; these are called trick modes. The implementation of precise trick mode play requires a very high decoding capability or a very intelligent scheme in order to handle the high computation complexity. The complexity is increased in many surveillance applications where more than one camera is used to monitor multiple spots or to monitor the same area using various angles. An implementation of a trick mode play and a frame buffer management scheme for the hardware-based H.264/AVC codec for multi-channel is presented in this paper. The experimental results show that exact trick mode play is possible using a standard H.264/AVC video codec with keyframe encoding feature at the expense of bitstream size increase.

• Korean Journal of Remote Sensing
• /
• v.32 no.6
• /
• pp.693-701
• /
• 2016

To make a mosaicked image, we need to estimate the geometric relationship between individual images. For such estimation, we needs tiepoint information. In general, feature-based methods are used to extract tiepoints. However, in the case of textureless images, feature-based methods are hardly applicable. In this paper, we propose a frequency domain matching method for automated mosaicking of textureless images. There are three steps in the proposed method. The first step is to convert color images to grayscale images, remove noise, and extract edges. The second step is to define a Region Of Interest (ROI). The third step is to perform phase correlation between two images and select the point with best correlation as tiepoints. For experiments, we used GOCI image slots and general frame camera images. After the three steps, we produced reliable tiepoints from textureless as well as textured images. We have proved application possibility of the proposed method.

• The Korean Journal of Nuclear Medicine
• /
• v.25 no.1
• /
• pp.53-60
• /
• 1991

Extracorporeal shock wave lithotripsy (ESWL) with adjunctive oral litholytic therapy has proven to be a useful treatment in selected patients with gallbladder stones. To study the effect of ESWL on gallbladder dynamics, $^{99m}Tc-DISIDA$ hepatobiliary scintigraphy was done for 25 patients with symptomatic gallstones and 10 normal controls. Of these 25 patients, 15 were treated with ESWL and adjunctive oral litholytic agents (ESWL group) and 10 were treated only with oral litholytic agents (UDCA group). After overnight fast and gallbladder visualization on a routine hepatobiliary scintigraphy with 7mCi of $^{99m}Tc-DISIDA$, subjects were given fatty meal and imaged with a gamma camera interfaced to a computer (1 frame/minute for 70 minutes). A gallbladder time-activity curve was generated and latent period (LP), ejection period (EP), ejection fraction (EF) and ejection rate (ER) were calculated. ESWL group were studied before, 1day after and 2weeks after ESWL, and WDCA group were studied before and 2weeks after starting oral medication. Mean basal EF was significantly reduced in patients but other parameters were not reduced. In ESWL group, mean EF and mean ER at lday after ESWL were reduced. In 3 of them, gallbladder was not visualized at all. Two weeks after ESWL, however, all parameters were recoverd to basal level. In UDCA group, all parameters were not changed significantly during medication. We can conclude that ESWL has such immediate adverse effect on gallbladder dynamics as reducing contractility and nonvisualization of gallbladder but it has no long-term effect.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.4
• /
• pp.429-435
• /
• 2009

This paper propose color assessment method using HSI model to evaluate quantitative quality of mosaic images by aerial digital frame camera. Firstly, we convert RGB color into HSI model and we extract six pixel information of S and I corresponding to H from adjacency image by using HSI model. Secondly, a method to measure similarity and contrast is proposed and performed for assesment of observation regarding adjacency images. Through these procedure, we could generate four parameters. We could observe that both of the evaluation results by proposed method and the evaluation results by visual were almost similar. This facts support that our method based on several formula can be an objective method to evaluate a quality of mosaic images itself.

• The Journal of the Korea Contents Association
• /
• v.13 no.10
• /
• pp.19-26
• /
• 2013

In the Malaysian license plates, alphabets and numerals which are made by plastic, are adhered to a frame as embossing style and occasionally characters in horizontal, vertical directions are aligned with narrow space. So the extraction of character stroke information can be hard in the vehicle images of low illumination intensity. In this paper, Malaysian license plate recognition algorithm for low illumination intensity image is proposed. DoG filtering based character stroke generation method is introduced to derive exact connected components of strokes in the vehicle image of low illumination intensity. After localization of plate by connected component analysis, characters are segmented and recognized. Algorithm is experimented for the 6,046 vehicle images captured in Kuala Lumpur by IR camera without using any special light during day and night. The experimental results show that recognition accuracy of plates is 96.1%.