• International Journal of Industrial Entomology and Biomaterials
• /
• 제47권2호
• /
• pp.79-89
• /
• 2023

This paper is about the development results of an automatic silkworm breeding system to reduce labor and time by automatically performing the works for silkworm droppings changing and feed its food. It consists of an automatic guided vehicle and a processing unit. The automatic guided vehicle transports a silkworm dropping changing frame mounted on a silkworm tray stand, and the processing unit takes over the dropping changing frame on it, removes excrement contained the droppings changing frame and feeds silkworm food. In the case of the current silkworm farming, because the breeding period for large silkworms (4 to 5 stage) is short to 14 days and the supply of mulberry leaves takes 98% of the total amount of mulberry leaves needed for breeding silkworms at this time, labor concentration is intensive, and all breeding works depends on manpower. Therefore, it was difficult to breed large silkworms on a large scale. Moreover, silkworms are bred by adding Silkworm bed (Seop) and mulberry in the silkworm tray, and their droppings changing is to separate silkworms and excrement by moving silkworm trays one by one, and the production cost increases due to the high-cost manpower for silkworm breeding. To solve this problem, technology for automating silkworm breeding has also been developed. However, there is still a limitation that silkworm feeding and droppings changing works are not suitable for mass breeding because a lot of labor and time are spent depending on manual work. Therefore, a new silkworm breeding system for breeding silkworm automatically is needed and so we developed an Automatic Silkworm Breeding System applying the droppings change frame, the inverting unit, the feeding silkworm food device and automatic guided vehicle.

• Journal of information and communication convergence engineering
• /
• 제5권3호
• /
• pp.269-272
• /
• 2007

The shortcut shot detection based on MPEG compressed video bitstream is presented in this paper. The detection algorithm is used the video picture frame from MPEG compressed video directly not to be decompressed the original image. For shortcut detection, I and P frame of MPEG video bitstream are classified. The changing scene cuts at I pictures are detected by the decompressed DC image and scene cuts at P picture frame by monitoring the percentage of intra-macroblocks per P picture are detected. Experimental results using test video bitstream QVGA results in average 92% detection rate, searching time is taken around 4.5 times faster in comparison with changing scene shot detection algorithm which is decompressed the compressed bitstream.

• 건축역사연구
• /
• 제25권5호
• /
• pp.51-62
• /
• 2016

Since the recent Hanok boom in Korea, Contemporary Hanok has been evolving in terms of structure, space, form, etc. To get a comprehensive understanding of the diversified Contemporary Hanok, this paper aims at its type classification by analyzing architects' designs since 2000. The criteria for the classification are two: (1) renovation [Re] or new construction [New]; and (2) degree of Contemporary Hanok's deviation from the traditional Hanok's standard - maintaining the traditional form [Main]; changing space within the traditional form [Space]; changing the traditional frame [Frame]; and juxtaposing the traditional and the modern [Combi]. From the two criteria, this paper deduced eight types of Contemporary Hanok, named respectively: Re-Main, New-Main, Re-Space, New-Space, Re-Frame, New-Frame, Re-Combi, and New-Combi, and studied their cases. It can be argued that various aspects of Contemporary Hanok and their critical meanings were well-investigated through this type classification and case-studies.

• 한국컴퓨터정보학회논문지
• /
• 제23권7호
• /
• pp.57-62
• /
• 2018

In this paper, we propose an improved algorithm for rendering method to guarantee frame rates based on HMD (Head Mounted Display) motion in an avionics simulator. One of important issues in HMD simulators is to guarantee frame rates despite fast motion of HMD which is more rapid than the aircraft's moving speed to maintain a quality of images. Therefore, we propose an algorithm considering the moving speed of a pilot's head: Improved Speed-Based LOD (Level-Of-Detail) Control (ISBLC). In the proposed algorithm, frame rates are improved by changing dynamic LOD which determines details of objects for rendering images. Throughout the experiments, we show the average frame rates are achieved up to 60 and minimum frame rates are guaranteed up to 40. The proposed algorithms will be used HMD simulation in avionics simulators.

• Earthquakes and Structures
• /
• 제22권5호
• /
• pp.517-526
• /
• 2022

In this paper, nonlinear P-delta effects are studied on the seismic performance, and the modal responses of a flexural frame, considering large deformations. Using multiple scales method, the nonlinear differential equations of motion are estimated, and the nonlinear interactions between the frame's degrees of freedom are outcropped. The results of time and frequency domain analyzes of a dynamic model are examined under internal resonance cases, and the linear and nonlinear responses are investigated in each modal cases. Also, changing the modal responses with respect to the amplitude and frequency of the harmonic forces is evaluated. It is shown that the dominant absorption of energy is in the first natural frequency of the frame, in the case of earthquake excitation, and when a harmonic force is applied to the frame, the peaks of the frequency domain responses depending on the frequency of harmonic force are in the first, and second or third natural frequency of the structure.

• 한국강구조학회 논문집
• /
• 제23권1호
• /
• pp.73-81
• /
• 2011

골조로 구성된 철탑의 풍력계수는 구성부재의 단면형상, 충실율 등에 의해 변하며 풍향각에 의해서도 여러 가지 특성이 나타난다. 본 연구에서는 이러한 철탑골조에 대하여 충실율과 풍향각을 변화시키면서 풍동실험을 수행하여 철탑골조에 작용하는 풍력특성을 평가한다. 실험은 먼저 철탑을 구성하고 있는 부재의 특성을 파악하기 위한 기본형상 부재에 대한 실험을 수행하였다. 그리고 철탑 사각골조는 2D와 3D 형태로 기본형에 철탑부재를 추가하는 방법과, 부재크기를 증가시키는 방법으로 충실율을 변화시킨 모형을 제작하였으며, 2D 형상은 풍향각을 0도에서 90도까지, 3D 형상은 풍향각을 0도에서 45도까지 변화시키면서 풍동실험을 수행하였다. 본 연구의 결과인 철탑 사각골조의 풍력계수 특성은 향후 철탑 풍하중 설계의 기초자료로 사용될 것이다.

• 정보와 통신
• /
• 제11권4호
• /
• pp.62-70
• /
• 1994

본고는 교환기의 기본구조를 변경하지 않고 프레임릴레이를 통하여 ISDN(Intergrated services digital network) 교환기에 물리적으로 적용 가능한 LAN(Local area network) 인터페이스 기술에 대하여 서술하였다. 프레임릴레이의 구현을 위해 기존 X.25 서비스와의 상호접속 방안이 매우 중요한데 이를 위해서는 X.75 및 I.122를 배경으로 하는 상호적인 방안이 고려되어야 한다. 프레임릴레이 서비스에 필요한 특징 및 트로토콜, 브릿지 상호접속 및 ISDN 노드에 사용되어 프레임 수행을 위한 프레임핸들러의 설계방법에 이어, 프레임릴레이를 통한 LAN과 ISDN간 상호접속 메카니즘에 대해 각각 서술하였다. 그리고 프레임릴레이를 통하여 LAN을 위한 고속 프레임릴레이 서비스를 구현한 주요국의 사례를 살펴보았다.

• International journal of advanced smart convergence
• /
• 제11권3호
• /
• pp.64-71
• /
• 2022

Various types of attendance management systems are being introduced in a remote working environment and research on using face recognition is in progress. To ensure accurate worker's attendance, a face recognition-based attendance management system must analyze every frame of video, but face recognition is a heavy task, the number of the task should be minimized without affecting accuracy. In this paper, we proposed a search model using time interval variation to minimize the number of face recognition task of recorded videos for attendance management system. The proposed model performs face recognition by changing the interval of the frame identification time when there is no change in the attendance status for a certain period. When a change in the face recognition status occurs, it moves in the reverse direction and performs frame checks to more accurate attendance time checking. The implementation of proposed model performed at least 4.5 times faster than all frame identification and showed at least 97% accuracy.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.14-15
• /
• 2019

The demand for drywall is increasing as the structural type of apartment building is changing to a rigid frame structure. At present, the thickness of the gypsum board used for drywall is mostly 9.5mm and is required to be changed to 12.5mm to improve the performance of the wall. A structural safety test has been conducted in accordance with KS F 2613 to verify the effect of changing the thickness of the gypsum board to 12.5mm in terms of improvement as to stiffness. As a result of the test, the stiffness of the drywall has increased by about 19.6% and the impact resistance by about 30.4%.

• 디지털융복합연구
• /
• 제11권7호
• /
• pp.135-140
• /
• 2013

잡음 추정과 검출 알고리즘에서는 LMS Filter를 이용하여 변화하는 잡음 환경에 빠르게 적응할 수 있도록 한다. 하지만 LMS Filter는 잡음 추정을 위한 일정 시간 동안 적응 시간이 필요하며 신호의 변화가 일어날 경우 더 많은 적응 시간이 소요되는 단점을 가지고 있다. 따라서 이를 보완하기 위하여 프레임 단위의 AELMS Filter를 이용한 잡음 제거 방법을 제안한다. 본 논문은 잡음 환경에서 입력되는 신호를 프레임 단위로 분할하고 평균과 분산을 이용한 예측 LMS Filter를 구성하여 잡음을 제거하므로 잡음 환경이 변화하더라도 빠른 적응 시간으로 잡음을 제거한다. 또한 환경 잡음과 음성 신호가 혼합되어 입력될 때 잡음을 제거하여 음성의 고유 특성을 유지하고 음성 정보 손상을 줄이기 위한 방법이다. 프레임 단위의 AELMS Filter를 이용한 잡음 제거 방법으로 잡음 제거 성능을 평가하였다. 실험 결과 변화하는 환경 잡음을 제거하여 얻은 감쇠도가 평균 6.8dB 향상되었다.