• 지질공학
• /
• 제23권1호
• /
• pp.67-77
• /
• 2013

주암댐 보조여수로 건설공사 터널 구간 중 사전 조사가 미치지 못하는 구간의 정보취득과 파쇄대의 정확한 위치 및 크기를 예측하기 위하여 일부 구간에 대하여 터널 내 탄성파반사법(TSP)탐사를 실시하였다. 공사 착공 전에 실시한 사전조사 결과(지표 지질조사, 전기비저항 탐사, 시추조사 등), TSP탐사 결과, 그리고 실제 현장 굴진면에 대한 지질매핑 결과를 비교하였다. TSP탐사는 사전조사에서 감지하지 못한 주요 파쇄대를 잘 감지해내었으며 이에 따라 초기에 계획된 보강 계획을 변경하였다. TSP탐사 예측결과와 현장 막장면 비교 결과 파쇄대가 발달한 지점이 대부분 일치하는 것을 확인할 수 있었고, 이를 통해 터널 굴진면 예측에 비용 및 시간을 최소화 할 수 있고, 높은 정확성을 갖고 있는 TSP탐사의 현장 적용이 유용한 것으로 판단하였다. 다만 TSP탐사법이 갖는 몇 가지 단점으로 인하여 현장 적용에 일부 제약이 뒤따르나 이를 보완한다면 터널 굴착시 전방 예측을 위해 비교적 높은 효율성과 신뢰성을 갖고 TSP탐사를 활용할 수 있을 것이라 사료된다.

• 대한기계학회논문집A
• /
• 제21권10호
• /
• pp.1694-1701
• /
• 1997

The residual safety assessment of steel structures, an important subject in practice, is given to much attention. Life prediction in the planning course of steel structures under fatigue loading is mainly based on fatigue design criteria resulting from S-N curves. But for any reason cracks have to be assumed due to fabrication failures or fatigue loading in service which can lead total fracture of structures. The life prediction can be carried out by means of fracture mechanics using Paris-Erdogan equation($da/dN=C {\cdot}{\Delta}K^m$). The paper presents results from charpy test to interpret transition behaviour of charpy energy($A_V$) in a wide temperature range and from constant-load-amplitude test to measure fatigue crack growth of various steels widely used in steel bridges since beginning of 20 centuries in Europe. In the normal service temperature range of steel bridges, the steel S355M shows higher maximum charpy energy($A_{Vmax}$) and lower transition temperature($T_{AVmax/2}$) than other steels considered. The C and m of Paris-Erdogan equation on the steels appear to be correlated, and to be affected by the R-ratios due to crack closure, especially at a low fatigue crack growth rate. Scanning electron microscopy analysis was carried out to interpret an influence of the crack closure effects on the correlation of C and m.

• 콘크리트학회논문집
• /
• 제27권2호
• /
• pp.169-176
• /
• 2015

현재까지 발표된 크기효과법칙은 보통중량 콘크리트에 기반하고 있어 파괴특성이 다른 경량골재 콘크리트에서는 그 활용성이 의문시되고 있다. 따라서 이 연구에서는 콘크리트의 기건단위질량이 압축강도의 크기효과에 미치는 영향을 예측할 수 있는 모델을 개발하고 기존 연구결과들을 모아 데이터베이스화하였다. 그리고 비선형 파괴역학에 근거한 Ba${\check{z}}$ant와 Kim and Eo의 예측모델 및 이 연구에서 제안한 식에 대한 실험상수들을 결정한 후, 상호 비교 분석하였다. 그 결과, 콘크리트의 기건단위질량을 고려한 본 연구의 예측모델이 Ba${\check{z}}$ant와 Kim and Eo의 예측모델보다 경량골재 콘크리트에 대한 실험결과를 더 잘 예측하고 있음을 알 수 있었다.

• Hip & pelvis
• /
• 제36권2호
• /
• pp.135-143
• /
• 2024

Purpose: Hip fractures are associated with increased mortality. The identification of risk factors of mortality could improve patient care. The aim of the study was to identify risk factors of mortality after surgery for a hip fracture and construct a mortality model. Materials and Methods: A cohort study was conducted on patients with hip fractures at two institutions. Five hundred and ninety-seven patients with hip fractures that were treated in the tertiary hospital, and another 147 patients that were treated in a secondary hospital. The perioperative data were collected from medical charts and interviews. Functional Assessment Measure score, Short Form-12 and mortality were recorded at 12 months. Patients and surgery variables that were associated with increased mortality were used to develop a mortality model. Results: Mortality for the whole cohort was 19.4% at one year. From the variables tested only age >80 years, American Society of Anesthesiologists category, time to surgery (>48 hours), Charlson comorbidity index, sex, use of anti-coagulants, and body mass index <25 kg/m² were associated with increased mortality and used to construct the mortality model. The area under the curve for the prediction model was 0.814. Functional outcome at one year was similar to preoperative status, even though their level of physical function dropped after the hip surgery and slowly recovered. Conclusion: The mortality prediction model that was developed in this study calculates the risk of death at one year for patients with hip fractures, is simple, and could detect high risk patients that need special management.

• Journal of Trauma and Injury
• /
• 제28권3호
• /
• pp.144-148
• /
• 2015

Purpose: Immediate identification of vascular injury requiring embolization in patients with pelvic bone fracture isn't an easy task. There have been many trials finding indicators of embolization for patients with pelvic bone fracture. Although Young and Burgess classification is useful in decision making of treatment, it is reported to have little value as indicator of embolization in major trauma patients. The aim of this study is to find out Young and burgess classification on predicting vessel injury by analzyng pelvic radiograph taken from major trauma patients with pelvic bone fracture. Methods: Among major trauma patients with injury severity scores (ISS) higher than 15 who visited our emergency room from January 2011 to June 2014, 200 patients were found with pelvic bone fracture in trauma series and thus pelvic CT angiography was taken. Setting aside patients with exclusion criteria, 153 patients were enrolled in this study for analysis of Young and Burgess classification. Results: The most common mechanism of injury was lateral compression in both groups. There was no statistical significant difference in Young and Burgess classification (p=0.397). The obturator artery was the most commonly injured artery in both groups. Six patients had more than one site of bleeding. Conclusion: Prediction of transcatheter angiographic embolization using Young and Burgess classification in severe trauma patients is difficult and requires additional studies.

• Structural Engineering and Mechanics
• /
• 제74권6호
• /
• pp.723-735
• /
• 2020

This study is reported the adhesion failure in adhesive bonded composite and specifically for the T-joint structure. Three-dimensional finite element analysis has been performed using a commercial tool and the necessary outcomes are obtained via an eight noded solid element (Solid 185-element) from the library of ANSYS. The structural analysis input has been incurred through ANSYS parametric design language (APDL) code. The normal and shear stress distributions along different layers of the joint structure have been evaluated as the final outcomes. Based on the stress distributions, failure location in the composite joint structure has been identified by using the Tsai-Wu stress failure criterion. It has been found that the failure index is maximum at the interface between flange and web part of the joint (top layer) which indicates the probable location of failure initiation. This kind of failures are considered as adhesion failure and the failure propagation is governed by strain energy release rate (SERR) of fracture mechanics. The different adhesion failure lengths are also considered at the failure location to calculate the SERR values i.e. mode I fracture (opening), mode II fracture (sliding) and mode III fracture (tearing) along the failure front. Also, virtual crack closure technique (VCCT) principle of fracture mechanics steps is used to calculate the above said SERRs. It is found that the mode I SERR is more dominating compared to other two modes of failure for the joint considered. Finally, the influences of various parametric (geometrical and material) effect on SERR of the joint structure are evaluated and discussed in details.

• 대한기계학회논문집A
• /
• 제38권8호
• /
• pp.917-923
• /
• 2014

휴대폰과 같은 전자제품의 소형화로 체결 부품도 소형화가 요구된다. 초소형 볼트의 머리부분 두께 감소 요구에 따라 체결시 볼트 머리부 파손으로 충분한 체결력을 확보하는데 어려움이 있다. 본 연구에서는 볼트 깊이에 따른 체결 토크를 해석적으로 예측하여 비트 형상 설계에 활용하고자 한다. 볼트 머리부는 주로 전단 파손이 발생하기 때문에, 볼트용 선재의 전단 실험을 통하여 파손 기준을 설정하였다. 그리고, 설정된 전단파손 기준을 바탕으로 체결시 파손 형상과 최대 체결 토크를 예측하였다. 또한, 머리부에 성형되는 비트의 깊이에 따른 최대 체결토크을 예측하였다. 비트 깊이가 깊을수록 볼트 머리와 나사부의 경계에서 응력 집중으로 파손이 빨리 발생하고, 최대 체결 토크도 작아짐을 알 수 있었다.

• 소성∙가공
• /
• 제21권1호
• /
• pp.49-57
• /
• 2012

It is difficult to estimate the properties of multilayered sheet because they are composed of one or more different materials. Plastic deformation behavior of the multilayered sheet is quite different as compared to each material individually. The deformation behavior of multilayered sheet should be investigated in order to prevent forming defects and to predict the properties of the formed part. In this study, the mechanical properties and formability of stainless steel-aluminum-magnesium multilayered sheet were investigated. The multilayered sheet needs to be deformed at an elevated temperature because of its poor formability at room temperature. Uniaxial tensile tests were performed at various temperatures and strain rates. Fracture patterns changed mainly at a temperature of $200^{\circ}C$. Uniform and total elongation of multilayered sheet increased to values greater than those of each material when deformed at $250^{\circ}C$. The limiting drawing ratio (LDR) was obtained using a circular cup deep drawing test to measure the formability of the multilayered sheet. A maximum value for the LDR of about 2 was achieved at $250^{\circ}C$, which is the appropriate forming temperature for the Mg alloy. Fracture patterns on a circular cup and thickness of formed part were predicted by a rigid-viscoplastic FEM analysis. Two kinds of modeling techniques were used to simulate deep drawing process of multilayered sheet. A single-layer FE-model, which combines the three different layers into a macroscopic single layer, predicted well the thickness distribution of the drawn cup. In contrast, the location and the time of fracture were estimated better with a multi-layer FE model, which used different material properties for each of the three layers.

• 터널과지하공간
• /
• 제28권6호
• /
• pp.569-583
• /
• 2018

본 연구는 경상남도 일대의 도로 및 산업단지 시공과정에 발생된 암반사면에 대하여 현장조사 및 기존 조사자료 등을 토대로 붕괴를 일으키는 여러 가지 요인들을 분석하여 붕괴 특성을 파악하고자 하였다. 직접 조사한 사면가운데 붕괴가 발생한 사면의 경우 붕괴특성을 분석하여 붕괴사면 자료의 계속적인 수집 및 데이터베이스 구축과 관리 및 분석을 통해 붕괴사면 예측 및 예방에 활용할 수 있을 것이다. 절토사면의 붕괴특성에 사용된 평가항목은 여러 가지 요인들 중에 기존에 사면 안정성 평가에 많이 사용된 평가항목을 비교하여 중복되는 요소들 중에 객관적인 평가항목으로 볼 수 있는 항목을 선택하여 사용하였다. 암반사면의 파괴유형은 기반암의 암종에 따라 평면파괴, 쐐기파괴, 원호파괴, 전도파괴 등의 양상이 다르게 발생하므로 사면의 안정성을 검토할 경우 반드시 지표지질 조사를 실시하여 기반암의 암종을 분석한 후 그에 따른 사면의 안정성 해석을 수행하여야 한다.

• 대한조선학회논문집
• /
• 제39권1호
• /
• pp.90-99
• /
• 2002

선체에 존재하는 균열의 전파거동을 해석하기 위해서는 응력강도계수의 추정이 그 전제조건이 되지만 현재까지 이러한 복잡 구조물에서 응력강도계수를 간편하게 계산하는 방법이 확립되어 있지 못하다는 점이 가장 큰 걸림돌이 되고 있다. 본 연구에서는 선체와 같이 부정정도가 매우 큰 복잡 구조물에서의 균열전파 거동을 추정하기 위한 전 단계로서 다양한 형태의 균열에 대한 응력강도계수를 용이하게 계산하기 위하여 무균열 상태에서의 응력해석 결과에 기초한 응력강도계수의 간이 추정법을 유도하고, 다른 연구자들의 실험 및 해석 결과와 비교하여 제안된 방법의 유용성을 검증하였다.