• 방사성폐기물학회지
• /
• 제4권1호
• /
• pp.9-15
• /
• 2006

결정질 암반에 위치한 가상의 방사성폐기물처분장에 대한 정확한 안전성 평가를 수행하기 위해서는 다공암반으로 대표되는 공학방벽 및 결정질 암반으로 대표되는 자연방벽을 모두 고려한 매질에서의 물질 거동 특성을 정확하게 모사하는 것이 중요하다. 본 논문에서는 단열-다공암반내 유동 및 물질전달의 정확한 해석을 위한 연결망 구축방법에 대하여 서술하였다. 실제 단열암반을 사실적으로 모사하기 위하여 단열 물성자료는 확률밀도함수를 이용하여 생성하였다. 2차원의 사각격자로 모사된 단열암반과 육면체로 모사된 다공암반간 교차선의 원활한 검색을 위하여 단열암반과 연결전 다공암반의 교차면에 가상의 단열암반을 추가적으로 도입하였다. 전체유동경로를 구성하기 저하여 생성된 단열들 간의 교차선을 효율적으로 검색할 수 있는 방법 및 단열암반 및 단열-다공암반간의 연결도를 신속히 확인하는 알고리즘을 제안하였다. 이러한 방법들은 추후 방사성폐기물처분장에서의 단열-다공 암반을 통한 핵종 이동 특성을 모사할 수 있는 수치코드 개발에 많은 도움을 줄 것으로 사료된다.

• 한국전산유체공학회지
• /
• 제21권4호
• /
• pp.19-27
• /
• 2016

The flow analyses through a porous hydraulic fractures is among the most important tasks in recently developed shale reservoirs but is rendered difficult by non-Darcy effects and geometric changes in the hydraulic fractures during production. In this study, several Computational Fluid Dynamics(CFD) models of hydraulic fractures, with a simple shape such as that of parallel plates, filled with proppants were built. Direct Numerical Simulation(DNS) analyses were then carried out to examine the flow loss characteristics of the fractures. The hydraulic diameters for the simulation models were calculated using the DNS results, and then they were compared with the results from Kozeny's definition of hydraulic diameter which is most widely used in the flow analysis field. Also, the characteristic parameters based on both hydraulic diameters were estimated for the investigation of the flow loss variation features. Consequently, it was checked in this study that the hydraulic diameter based on Kozeny's definition is not accordant to the results from the DNS analyses, and the case using the CFD results exhibits f Re robustness like general pipe flows, whereas the other case using Kozeny's definition doesn't. Ultimately, it is expected that discoveries reported in this study would help further porous flow analyses such as hydraulic fracture flows.

• Journal of Periodontal and Implant Science
• /
• 제53권6호
• /
• pp.444-452
• /
• 2023

Purpose: The aim of this study was to retrospectively evaluate the survival and failure rates of RESTORE^® implants over a follow-up period of 10-15 years at a university dental hospital and to investigate the factors affecting the survival rate of these dental implants. Methods: A total of 247 RESTORE^® dental implants with a resorbable blast media (RBM) surface inserted in 86 patients between March 2006 and April 2011 at the Department of Periodontology of Seoul National University Dental Hospital were included. Patients with follow-up periods of less than 10 years were excluded, and data analysis was conducted based on dental records and radiographs. Results: Over a 10- to 15-year period, the cumulative survival rate of the implants was 92.5%. Seventeen implants (6.88%) were explanted due to implant fracture (n=10, 4.05%), peri-implantitis (n=6, 2.43%), and screw fracture (n=1, 0.4%). The results of univariate regression analysis using a Cox proportional hazards model demonstrated that implants placed in male patients (hazard ratio [HR], 4.542; 95% confidence interval [CI], 1.305-15.807; P=0.017) and implants that supported removable prostheses (HR, 15.498; 95% CI, 3.105-77.357; P=0.001) showed statistically significant associations with implant failure. Conclusions: Within the limitations of this retrospective study, the RESTORE^® dental implant with an RBM surface has a favorable survival rate with stable clinical outcomes.

• 지구물리와물리탐사
• /
• 제13권4호
• /
• pp.307-314
• /
• 2010

석유와 가스 등 지하자원 탐사를 위한 탄성파 탐사자료의 처리 및 해석에 있어서 이방성에 대한 연구는 매우 중요하다. 중합 및 구조보정 등 자료처리과정에 필요한 탄성파 속도를 등방성이라고 가정하였으나 실제 지하지질의 속도구조는 이방성을 가지는 경우를 흔히 볼 수 있는데, 특히 셰일층 또는 파쇄 및 절리 등 균열이 발달된 탄산염 저류층에서 이방성 특성을 찾아볼 수 있다. 본 연구에서는 합성수지인 베이클라이트로 만든 VTI매질을 대상으로 탄성파 축소모형실험을 이용하여 탄성파 이방성에 대한 연구를 수행하였다. 탄성파 모형실험에서 등방성 재료는 입사각의 변화에도 불구하고 속도가 항상 일정하지만, 이방성 매질의 경우 측정 방향 및 입사각에 따라 탄성파 P파 및 S파의 속도가 변화하였다. 측정된 탄성파 속도는 군속도로 추정되며 군속도로부터 구한 탄성계수를 이용하여 이방성계수인 ${\varepsilon}$, ${\delta}$, ${\gamma}$를 성공적으로 파악할 수 있었다. 이방성매질에서는 이론적으로 계산된 위상속도와 측정된 탄성파속도는 비교적 잘 일치하였으며, 또한 qP, qS, SH파의 위상속도를 slowness surface에서 나타내면 측정 매질에 대한 이방성 특성이 잘 표현되었다. S파의 경우 매질과 송수신기의 측정 방향에 따라 서로 다른 두 개의 횡파가 분극특성을 나타내며 전파됨을 확인할 수 있었다.

• Macromolecular Research
• /
• 제16권5호
• /
• pp.411-417
• /
• 2008

The surfaces of henequen fibers, which can be obtained from the leaves of agave plants, were treated with two different media, tap water and sodium hydroxide, that underwent both soaking and ultrasonic methods for the fiber surface treatment. Various biocomposites were fabricated with untreated and treated, chopped henequen fibers and polypropylene using a compression molding method. The result is discussed in terms of interfacial shear strength, flexural properties, dynamic mechanical properties, and fracture surface observations of the biocomposites. The soaking (static method) and ultrasonic (dynamic method) treatments with tap water and sodium hydroxide at different concentrations and treatment times significantly influenced the interfacial, flexural and dynamic mechanical properties of henequen/polypropylene biocomposites. The alkali treatment was more effective than the water treatment in improving the interfacial and mechanical properties of randomly oriented, chopped henequen/PP bio-composites. In addition, the application of the ultrasonic method to each treatment was relatively more effective in increasing the properties than the soaking method, depending on the treatment medium and condition. The greatest improvement in the properties studied was achieved by ultrasonic alkalization of natural fibers, which was in agreement with the other results of interfacial shear strength, flexural strength and modulus, storage modulus, and fracture surfaces.

• 대한통합의학회지
• /
• 제5권4호
• /
• pp.103-112
• /
• 2017

Purpose : This study was conducted to improve cognitive oral healthcare care by analyzing the correlation between oral health behavior and oral health status Korean adolescents. The subjects were 65,528 youths in 798 schools monitored in the Twelfth Korea Youth Risk Behavior Web-based Survey in 2016. Methods : The general characteristics consisted of 9 items including sex, grade, and academic performance. The academic performance and economic status were restructured into "upper, middle, lower". Subjective health perception and subjective oral health perception were reorganized as "health", "normal", "no health". The sub-areas of oral health behavior include five times of daily brushing during the day yesterday. The number of brushing times was "0", "1-2", "3", "more than 4" After lunch at school, brushing was restructured as "always," "sometimes," "not." The oral health status subscale consisted of 6 items including tooth breakage and toothache at the time of eating. Result : Tooth fracture(43.7 %), pain in mastication(43.7 %), tooth tingling(47.4 %), gum pain and bleeding(45 %), pain in buccal mucosa(43.8 %) and halitosis(46.6 %) were rare in adolescent having healthy oral health status cognitively(P<.001). Nosymptom adolescents without dental sealant showed low tooth fracture(0.64 times), pain in mastication(0.67 times), tooth tingling(0.59 times), gum pain and bleeding(0.84 times), pain in buccal mucosa(0.76 times), and halitosis(0.90 times). Nosymptom adolescents without scaling showed low tooth fracture(0.88 times), pain in mastication(1.03 times), tooth tingling(0.82 times), gum pain and bleeding(0.64 times), pain in buccal mucosa(0.70 times) and halitosis(0.82 times). Conclusion : This study revealed that oral health status is correlated with oral health behavior. Development of educational media and program, and aggressive promotion required to establish oral health Korean adolescent.

• Composites Research
• /
• 제34권4호
• /
• pp.257-263
• /
• 2021

복합재료는 높은 비 강성 및 비 강도 특성으로 인해 기체 혹은 액체 연료를 저장하기 위한 압력 용기의 설계 및 제작에 널리 활용되고 있다. 이에 따라, 압력용기의 파열압력 또는 파단 변형률의 기계적 특성의 보다 정확한 측정은 상용화 전에 필수적 요소이다. 그러나, 기존의 시험방법을 활용한 복합재료 압력 용기의 안전성 검증은 하중 전달 매체의 변형으로 인한 추가적인 에너지 손실의 발생과, 불필요한 하중 및 모멘트의 발생 등의 한계가 있다. 따라서 본 연구에서는 수직기둥의 이론적인 하중전달 정도와 적용 가능한 수직방향 변위를 고려하여 세그먼트형 링 버스트 시험장치를 설계하였다. 또한, 세그먼트 형 링 버스트 시험장치의 균일한 압력분포를 검증하기 위해 수치해석을 활용하였고, 수압 시험방법과 링 시편의 원주방향 응력 및 변형률 분포를 비교하였다. 복합재료 압력용기의 파괴 거동을 모사하기 위해 Hashin 파손 기준을 적용하였고, 실험적으로 파단 변형률을 측정하여 이를 수치해석 결과와 비교하였다.

• 대한치과보철학회지
• /
• 제44권6호
• /
• pp.722-733
• /
• 2006

Statement of problem. The use of small diameter implants having less than 3 mm in diameter were restricted because of lack of bonding strength to bone. Purpose. The purpose of this study was to observe how much resorbable blast media pin implants increase the binding force to the bone compared to machined transitional pin implants by measuring removal torque, and whether they can be used as final implants for replacement of small diameter teeth. Material and method. Fifteen rabbits were used in this study. Two kinds of implants (resorbable blast media pin implants and machined transitional pin implants) were inserted in each tibia bicortically. After healing time of 2, 4 and 8 weeks, the removal torque values were recorded and the rabbits were sacrificed for histological analysis. Linear finite element method analyses were conducted to compare bicortical fixation with monocortical fixation. Result and conclusion. Within the limitation of this in vivo study, the following conclusions were drawn: 1) The removal torque value of RBM pin implants showed statistically significant increase compared to machined pin implants at 2, 4, and 8 weeks respectively (p<0.05). 2) The removal torque value of RBM pin implants at 2, 4, and 8 weeks was increased statistically significantly with time (p<0.05). 3) Bicortical fixation showed better stress distribution compared with monocortical fixation in a linear finite element method analysis. 4) RBM pin implants are not recommended as transitional implants because they showed a lot of bone fracture in histologic specimens.

• 한국지열·수열에너지학회논문집
• /
• 제8권2호
• /
• pp.55-60
• /
• 2012

In many cases, geothemal wells will not be opened up a geothermal reservoir under such conditions that an extraction of geothermal energy is economically viable without any further measures. Geothermal wells often have to be stimulated, in order to increase productivity. For the non-volcanic area, such as Korea, the hydraulic stimulation is necessary to complete geothermal power plant. The analysis of induced seismic event showed that the thermal resource might have a much wider extent and a much higher generation potential than previously assumed. In order to record compressional and shear waves emitted during fracture stimulation, three-component geophones are placed in a seismometer. The recorded data from one seismometer is the convolution of the source magnitude, the transmission media, and the sensitivity of the instrument.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제25권3호
• /
• pp.12-22
• /
• 2020

Managed aquifer recharge (MAR) is a promising water management strategy for securing stable water resources to overcome water shortage and water quality deterioration caused by global environmental changes. A MAR demonstration site was selected at Imgok-ri, Sangju-si, Korea, based on screening for the frequency of drought events and local water supply situations. The abundant groundwater discharging from a nearby abandoned coal mine is one of the potential recharge water sources for the MAR implementation. However, it has elevated levels of arsenic (~12 ㎍/L). In this study, the potential of the natural attenuation of arsenic by the field geological media was investigated using batch and column experiments. The adsorption and desorption parameters were obtained for two drill core samples (GM1; 21.8~22.8 m and GM2; 26.0~27.8 m depth) recovered from the potentially water-conducting fracture-zones in the injection well. The effluent arsenic concentrations were monitored during the continuous flow of the mine drainage water through the columns packed with the core samples. GM2 removed about 60% of arsenic in the influent (0.1 mg-As/L) while GM1 removed about 20%. The results suggest that natural attenuation is an acitive process occurring during the MAR operation, potentially lowering the arsenic level in the mine drainage water below the regulatory standard for drinking water. This study hence demonstrates that using the mine drainage water as the recharge water source is a viable option at the MAR demonstration site.