Abstract
Although conventional seismic data processing is based on the assumption that the media are isotropic, the subsurface is often anisotropy in shale formation or carbonate with cracks and fractures. This paper presents the anisotropic parameter and seismic modeling in transversely isotropic media with a vertical symmetry axis using seismic physical modeling. The experiment was successfully carried out with VTI media, laminated bakelite material, using contact transducer of p and s-wave transmission. The variation of velocities with angle of incidence was clearly shown in anisotropic material. Comparing these velocities with the calculated phase velocities, the (P) and (S)-wave velocity observed in anisotropic material was a very good agreement with the calculated values. Anisotropic parameter ${\varepsilon}$, ${\delta}$, ${\gamma}$ was estimated by using Lame's constant calculated from the observed velocity. For the purpose of testing (S)-wave polarization, a birefringence experiment was carried out. The higher velocity was associated with the polarization parallel to the fracture, and the lower velocity was associated with the polarization perpendicular to the fracture.
석유와 가스 등 지하자원 탐사를 위한 탄성파 탐사자료의 처리 및 해석에 있어서 이방성에 대한 연구는 매우 중요하다. 중합 및 구조보정 등 자료처리과정에 필요한 탄성파 속도를 등방성이라고 가정하였으나 실제 지하지질의 속도구조는 이방성을 가지는 경우를 흔히 볼 수 있는데, 특히 셰일층 또는 파쇄 및 절리 등 균열이 발달된 탄산염 저류층에서 이방성 특성을 찾아볼 수 있다. 본 연구에서는 합성수지인 베이클라이트로 만든 VTI매질을 대상으로 탄성파 축소모형실험을 이용하여 탄성파 이방성에 대한 연구를 수행하였다. 탄성파 모형실험에서 등방성 재료는 입사각의 변화에도 불구하고 속도가 항상 일정하지만, 이방성 매질의 경우 측정 방향 및 입사각에 따라 탄성파 P파 및 S파의 속도가 변화하였다. 측정된 탄성파 속도는 군속도로 추정되며 군속도로부터 구한 탄성계수를 이용하여 이방성계수인 ${\varepsilon}$, ${\delta}$, ${\gamma}$를 성공적으로 파악할 수 있었다. 이방성매질에서는 이론적으로 계산된 위상속도와 측정된 탄성파속도는 비교적 잘 일치하였으며, 또한 qP, qS, SH파의 위상속도를 slowness surface에서 나타내면 측정 매질에 대한 이방성 특성이 잘 표현되었다. S파의 경우 매질과 송수신기의 측정 방향에 따라 서로 다른 두 개의 횡파가 분극특성을 나타내며 전파됨을 확인할 수 있었다.