• 지질공학
• /
• 제3권2호
• /
• pp.125-148
• /
• 1993

암반지하수유동 해석의 복잡성은 열극과 공극간의 유동관계, 응력의 영향, 열극체계의 복잡한 기하학적 분포상태에 기인한다. 열극체계의 불규칙한 발달로 인한 규모종속과 이방성 특성은 지금까지의 해석방법으로는 만족할 만한 결과를 얻을 수 없다. 분리열극망(Discrete Fracture Network) 모델은 암반 지하수가 근본적으로 분리된 열극을 통하여 유동한다는 가정하에서 출발한다. 유동경로(flow path)는 열극의 기하학적 분포 및 상호간의 연결형태에 의하여 결정되며, 열극분펴 및 수리특성은 현장조사자료의 통계학적 처리에 의한 접근방법을 시도하고 있다. 본 모델을 적용한 연구지역은 평택군 포승면 원정리 일대 $1\textrm{km}^2$지역으로서, 열극자료 분석은 등면적투영도로부터 6개의 set를 도출하였으며, 열극의 크기는 lognormal분포를 나타냈다. 6개 열극 set가 차지하는 총투수성열극확률밀도(conductive fracture intensity)는 1.52로 나타났으며, set 1의 투수성열극밀도가 0.37로 가장 높게 나타났다. 지하공동으로으 유입량 계산은 열극투수계량계수를 $10^{-8}\textrm{m}^2/s$으로 하였을 경우, 29ton/일로 산출되며, $10^{-7}\textrm{m}^2/S$로 하였을 때 약 22배가 큰 65ton/일로 계산되었다. 본 모델은 지하공동건설시 부지특성조사나 평가시에 해석도구로 사용될 수 있으며, 정량적인 자료뿐만 아니라 정상적인 자료도 해석 및 평가과정에 응용될 수 있는 반복적인 실행을 통한 Forward 모델링방법을 사용하는 장점이 있다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.192-192
• /
• 2008

As the lifetime of nuclear power plants (NPPs) reaches design life, the probability for fatal accidents increases. Most of accidents are known to be caused by degradation of mechanical components. Pressure tubes are the most important components in CANDU reactor. They are subjected to various aging mechanisms such as delayed hydride cracking (DHC), irradiation and corrosion, etc. Therefore, the integrity of pressure tube is key concern in CANDU reactor. Up to recently, conventional deterministic approaches have been utilized to evaluate the integrity of components. However, there are many uncertainties to prevent a rational evaluation. The objective of this paper is to assess the failure probability of pressure tube in CANDU. To do this, probability fracture mechanics (PFM) analysis based on the Genetic Algorithm (GA) is performed. For the verification of the analysis, a comparison of the PFM analysis using a commercial code and mathematical method is carried out.

• 한국압력기기공학회 논문집
• /
• 제4권2호
• /
• pp.13-19
• /
• 2008

In order to predict a remaining life of a plant, it is necessary to select the components that are critical to the plant life. The remaining life of those components shall be evaluated by considering the aging effect of materials used as well as numerous factors. However, when evaluating reliability of nuclear structural components, some problems are quite formidable because of lack of information such as operating history, material property change and uncertainty in damage models. Accordingly, if structural integrity and safety are evaluated by the deterministic fracture mechanics approach, it is expected that the results obtained are too conservative to perform a rational evaluation of plant life. The probabilistic fracture mechanics approaches are regarded as appropriate methods to rationally evaluate the plant life since they can consider various uncertainties such as sizes and shapes of cracks and degradation of material strength due to the aging effects. The objective of this study is to evaluate the structural integrity for a reactor pressure vessel under the small break loss of coolant accident by applying the deterministic and probabilistic fracture mechanics. The deterministic fracture mechanics analysis was performed using the three dimensional finite element model. The probabilistic integrity analysis was based on the Monte Carlo simulation. The selected random variables are the neutron fluence on the vessel inside surface, the content of copper, nickel, and phosphorus in the reactor pressure vessel material, and initial RTNDT.

• 지질공학
• /
• 제20권4호
• /
• pp.425-436
• /
• 2010

이 연구는 부산광역시 기장군 일광면 일대의 일광광산 주변에 위치한 절리암반에 대하여 추계론적 해석기법을 적용하여 삼차원 절리연결구조를 구현하고 절리의 기하학적 특성에 따른 광산배수 산성도의 특성을 고찰하였다. 절리 분포특성을 규명하기 위하여 산성광산배수 발생 가능지역을 중심으로 지표 선형조사선과 시추공영상촬영에 의한 절리조사를 실시하였다. 일광광산의 현장실험 암반에 대한 삼차원 절리연결구조 모델이 추계론적으로 구현되었다. 예측된 절리분포의 타당성을 검토한 결과 모사된 삼차원 절리연결구조는 현장암반의 절리 분포특성을 잘 반영하는 것으로 나타났으며 광산배수 유동에 대한 개관적인 개념을 제공할 수 있다. 현장에서 자연수 주입으로 산성배수를 유도하기 위한 주입공 1공 및 관측공 3공이 설치되었다. 총 29일 동안 주입공으로 투입된 자연수를 모니터링한 결과 절리연결구조에 따른 절리의 기하학적 모수와 산성광산배수 발생 간에 상관성이 있는 것으로 해석되었다. 절리주향의 상대빈도가 상대적으로 큰 방향으로의 관측공에서 높은 값의 pH를， 그리고 낮은 값의 $SO^{2-}_4$ 농도가 측정되었다. 전반적인 추세는 절리주향의 상대빈도가 증가할수록 pH는 로그함수적인 증가를 보이며 $SO^{2-}_4$ 농도는 로그함수적인 감소를 나타내며 높은 결정계수의 상관성을 갖는다. 절리밀도가 상대적으로 큰 방향으로의 관측공에서 낮은 값의 pH를, 그리고 높은 값의 $SO^{2-}_4$ 농도가 측정되었다. 전반적인 추세는 1-D 절리밀도가 증가할수록 pH는 음지수함수적인 감소를 보이며 $SO^{2-}_4$ 농도는 지수함수적인 증가를 나타낸다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.820-824
• /
• 1997

In order to investigate the effect of surface treatment(Anodizing) and rolling in Al 5083-H131 alloy, ballistic testing was conducted. Ballistic resistance of these materials. was measured by protection ballistic limit(V$_{50}$), a statical velocity with 50% probability for incomplete penetration. Fracture behaviors and ballistic tolerance, described by penetration modes, are observed respectfully, resulting from V$_{50}$ test and Projectile Through Plates(PTP) test at velocities greater than V$_{50}$. PTP tests were conducted with 0$^{\circ}$obliquity at room temperature were also conducted with projectiles that were able to achieve near or complete penetration during PTP tests. Resistance to penetration, and penetration modes of Al 5052-H34 alloy, compared to those of Al 5083-H131 alloy.alloy.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.604-609
• /
• 2003

Flaw geometries, applied stress, and material properties are major input variables for the fracture mechanics analysis. Probabilistic approach can be applied for the consideration of uncertainties within these input variables. But probabilistic analysis requires many assumptions due to the lack of initial flaw distributions data. In this study correlations are examined between initial flaw distributions and in-service flaw distributions on structures under cyclic load. For the analysis, LEFM theories and Monte Carlo simulation are applied. Result shows that in-service flaw distributions are determined by initial flaw distributions rather than fatigue crack growth rate. So initial flaw distribution can be derived from in-service flaw distributions.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.267-272
• /
• 2003

In order to investigate the effect of face material on Ti/Al alloy laminates under high velocity impact, a ballistic testing was conducted. Ballistic resistance of these materials was measured by protection ballistic limit($V_{50}$), a statistical velocity with 50% probability penetration. Fracture behaviors and ballistic tolerance, described by penetration modes, were respectfully observed, by $V_{50}$ test and Projectile Through Plates (PTP) test at velocities greater than $V_{50}$. PTP tests were conducted with $0^{\circ}$obliquity at room temperature using 5.56mm ball projectile. $V_{50}$ tests with $0^{\circ}$obliquity were also done with projectiles that were able to achieve near or complete penetration during PTP tests. Resistance to penetration, and penetration modes which face material was Titanium alloy, were compared to those which face material was anodized Al alloy after cold-rolling.

• 한국해양공학회지
• /
• 제10권2호
• /
• pp.61-68
• /
• 1996

Weibull distribution function is applied very successfully to the strength of brittle materials such as ceramics and the weakest link model is applied to explain the ovents. This paper deals with the effect of specimen size on the strength of ceramics. The values of tensile strength were calculated by the Monte-Calro simuation. The tensile strength obtained was plotted on Weibull probabillity papers and represented by the 3-parameter Weibull distribution. The strength distribution function was compared with the theoretical weibull distribution. As a result, it was found that the Weibull shape parameter was changed due to the size and there was a possibility of a false indication as if the weakest link model holds good. We should be very careful when we apply the Weibull statistics to estimate the strength of products.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.784-789
• /
• 2001

In order to investigate the fracture behaviors(penetration modes) and the resistance to penetration during ballistic impact of cold-rolled Al 5052 H34 alloy laminates, anodized Al 5052 H34 alloy laminates, and Al 5052 H34 alloy after cold-rolling, ballistic testing was conducted. In general, superior armor material is brittle materials which have a high hardness. Ballistic resistance of these materials was measured by protection ballistic limit(V50), a statical velocity with 50% probability for incomplete penetration. Fracture behaviors and ballistic tolerance, described by penetration modes, are observed respectfully, resulting from V50 test and Projectile Through Plate(PTP) test at velocities greater than V50. PTP tests were conducted with 0$^{\circ}$obliquity at room temperature using 5.56mm ball projectile. V50 tests with 0$^{\circ}$obliquity at room temperature were also conducted with projectiles that were able to achieve near or complete penetration during PTP tests. Surface Hardness, resistance to penetration, and penetration modes of Al 5052 H34 alloy laminates compared to those of cold-rolled Al 5052 H34 alloy laminates and anodized Al 5052 H34 alloy laminates anodized Al 5052 H34 alloy after cold-rolling.

• 대한핵의학회지
• /
• 제17권2호
• /
• pp.63-69
• /
• 1983

In order to establish criteria for distinguishing between occult fracture and metastases, we have reviewed 52 records of cancer patients and 24 of rib fracture patients referred for bone scanning. In 52 patients with biopsy-proven malignancy, multiple linear increased uptake of the ribs was found in 32 cases (61.5%), and was the most common finding. In 24 patients with rib fracture, all but 1 had fecal increased uptake of the ribs, and lesions almost always aligned in a row. By analyzing the appearance of rib lesions in total 76 patients, it was concluded that there is a high probability that rib lesions detected by bone scanning are bony metastases if 1) they are multiple linear as opposed to fecal, ad 2) they are not aligned in the same location.