• 대한수학교육학회지:수학교육학연구
• /
• 제24권1호
• /
• pp.83-102
• /
• 2014

본 연구에서는 분수 학습을 마친 초등학교 6학년 학생 150명을 대상으로 분수의 5가지 의미에 관한 20개의 문항을 제시하였고, 학생들의 반응을 단위의 이해에 초점을 두어 분석하였다. 연구 결과, 전체-부분으로서의 분수에 익숙한 학생들은 분수의 다른 의미에서도 주어진 전체를 단위로 인식하는 오류를 많이 보였다. 또한, 각 의미별로 단위와 관련된 다양한 반응들이 나타났다. 이러한 연구 결과를 바탕으로 각각의 분수의 의미를 지도할 때 단위와 관련된 강조사항을 확인하여 시사점을 제공하고자 한다.

• 천문학회지
• /
• 제47권1호
• /
• pp.1-13
• /
• 2014

We analyze the dependence of disk morphology (arm class, Hubble type, bar type) of nearby spiral galaxies on the galaxy environment by using local background density (${\Sigma}_n$), projected distance ($r_p$), and tidal index (T I) as measures of the environment. There is a strong dependence of arm class and Hubble type on the galaxy environment, while the bar type exhibits a weak dependence with a high frequency of SB galaxies in high density regions. Grand design fractions and early-type fractions increase with increasing ${\Sigma}_n$, $1/r_p$, and T I, while fractions of flocculent spirals and late-type spirals decrease. Multiple-arm and intermediate-type spirals exhibit nearly constant fractions with weak trends similar to grand design and early-type spirals. While bar types show only a marginal dependence on ${\Sigma}_n$, they show a fairly clear dependence on $r_p$ with a high frequency of SB galaxies at small $r_p$. The arm class also exhibits a stronger correlation with $r_p$ than ${\Sigma}_n$ and T I, whereas the Hubble type exhibits similar correlations with ${\Sigma}_n$ and $r_p$. This suggests that the arm class is mostly affected by the nearest neighbor while the Hubble type is affected by the local densities contributed by neighboring galaxies as well as the nearest neighbor.

• East Asian Economic Review
• /
• 제22권4호
• /
• pp.403-425
• /
• 2018

This paper documents the presence of "sensitive sectors" in Free Trade Agreements, defined as sectors for which the within-FTA tariffs remain positive. The paper includes some brief theoretical discussion of the welfare implications of these, but the main emphasis is on reporting two measures of this phenomenon for countries in FTAs that entered into force between 1994 and 2003. One measure is the percentage of tariff lines that remain dutiable, and the second is the change, from before the FTA to after, in the average maximum (across 6-digit products) positive tariffs. Both measures are derived from data in the UNCTAD TRAINS database, and are then related to measures of country characteristics that might explain them. Low per capita GDP countries tend to have larger fractions of dutiable tariff lines, while higher income countries tend to post larger increases in average maximum positive tariffs. Both suggest that the favored treatment of sensitive sectors is undermining the potential gains from trade that FTAs could provide.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제22권6호
• /
• pp.1-11
• /
• 2017

This study was conducted to investigate the performance of four commercial chemical agents in stabilizing arsenic (As) in soil at the forest area near the former Janghang smelter site. After amending the stabilizing agents (A, B, C, and D) into As-contaminated soil samples, synthetic precipitation leaching procedure (SPLP) and solubility bioavailability research consortium (SBRC)-extractable As concentrations significantly decreased except for agent D, which is mainly composed of fly ash and calcium carbonate. Increase of SPLP and SBRC-extractable As concentrations in four soil samples (S1, S2, S3, and J2) was attributed to desorption of As adsorbed on iron oxides due to high pH generated by agent D. It is therefore necessary to consider application conditions according to soil characteristics such as pH and buffering capacity. Results of sequential extraction showed that readily extractable fractions of As in soil (i.e., sum of $SO_4-$ and $PO_4-extractable$ As in soil) were converted into non-readily extractable fractions by amending agents A, B, and C. Such changes in the As distribution in soil resulted in the decrease of SPLP and SBRC-extractable As concentration. A series of follow-up monitoring and management plan has been suggested to assess the longevity of the stabilization treatments in the site.

• 한국식품영양과학회지
• /
• 제36권7호
• /
• pp.819-824
• /
• 2007

본 연구는 큰비쑥를 80% EtOH로 추출하고 극성에 따른 용매분획을 실시하여 혈핵암 세포주를 대상으로 분획별에 따른 암세포 증식억제(cytotoxicity) 효과와 이러한 혈액암 세포주에 대한 세포독성 효과가 세포자연사(apoptosis)에 의해 일어나는 것인지, 몇 가지 apoptosis 유도 실험을 통해 확인해 보았다. HL-60 세포에 대한 증식억제 효과는 전반적으로 모든 처리구에서 농도의존적인 세포증식 억제효과가 나타났으며, 특히 헥산과 디클로로메탄 분획물에서 가장 강한 세포성장 억제효과가 나타났다. 이러한 세포성장 억제효과가 apoptosis 유도에 의한 것인지 알아보기 위해 apoptosis 유도에 의한 세포사멸의 특징인 DNA 단편화 현상을 비롯하여 세포형태학적 변화 및 유동세포분석기를 통한 DNA content를 측정한 결과, 큰비쑥 추출물에 의한 암세포 증식억제효과는 apoptosis를 유도하여 세포자연사를 통해 세포의 성장을 억제하는 것으로 확인되었다.

• 대한환경공학회지
• /
• 제27권1호
• /
• pp.25-35
• /
• 2005

산업도시인 울산지역의 토양을 대상으로 단계별추출법을 통해 토양 내 축적된 중금속의 총 농도와 존재형태에 대해서 분석하였다. 울산지역을 오염배출원의 특성별로 6개(녹지, 주거지, 교통밀집, 기계 및 조선공단, 석유화학공단, 비철금속공단) 지역으로 구분하여 토양시료를 채취하였다. 연속추출법에 의하여 분석한 토양 중 중금속의 총 농도는 대체적으로 비철금속공단지역 >> 기계 및 조선공단지역 > 교통밀집지역 > 녹지 > 주거지의 순으로 나타났다. 거의 대부분의 지역에서 Cd, Cr 및 Ni은 50% 이상이 residual의 형태로 존재하였고 다음으로 Fe & Mn oxide 형태였다. 그러나 다른 지역보다 다소 높은 중금속 농도를 보였던 비철금속 공단지역에서는 residual의 존재비율이 낮았으며, 다른 지점에 비해 organic & sulfides의 비율이 높았다. Cu는 지역에 따라 다소 다른 존재형태를 보였다. Pb와 Zn은 Fe & Mn oxide가 가장 중요한 존재형태였고 Pb의 경우 그 다음으로 residual이 높은 존재형태를 보였다. 토양이나 빗물의 pH와 같은 환경 조건의 변화에 따라 쉽게 자연계로 유입될 수 있는 이동성을 가진 exchangeable 및 carbonates형태의 중금속이 차지하는 비율은 분석대상 전 지점에 걸쳐 대체적으로 낮은 것으로 나타났다. 그러나 비철금속 공단지역의 토양에서는 중금속의 총 농도가 심각하게 높게 나타났다. 그래서 토양 중 이동성 중금속의 상대적인 존재비율은 낮을지라도, 그 지역의 매우 높은 총 농도 때문에 많은 양의 중금속이 자연계에 유입될 가능성이 크다고 볼 수 있다. 따라서 배출원에서의 사전 오염방지 대책이나 중금속에 오염된 토양의 복원 등 긴급한 대책이 절실한 것으로 판단된다. 또한, 왕수추출법과 연속추출법에서 얻어진 중금속의 총 농도는 Cd를 제외하고 전 항목에 대해 높은 결정계수(0.7 < R2 < 0.9)를 보였다.

• Nuclear Engineering and Technology
• /
• 제53권3호
• /
• pp.812-824
• /
• 2021

In order to reduce risks from the Steam Generator Tube Rupture (SGTR) accident and to meet safety targets, various measures have been analyzed to minimize the amount of fission product (FP) release. In this paper, we propose an introduction of a Containment Filtered Venting System (CFVS) connected to the steam generator secondary side, which can reduce the amount of FP release while minimizing adverse effects identified in the previous studies. In order to compare the effect of new equipment with the existing strategy, accident simulations using MELCOR were performed. As a result of simulations, it is confirmed that CFVS operation lowers FP release into the environment, and the release fractions are lower (minimum 0.6% of the initial inventory for Cs) than that of the strategy which intends to depressurize the primary system directly (minimum 15.2% for Cs). The sensitivity analyses identify that refill of the CFVS vessel is a dominant contributor reducing the amount of FP released. As the new strategy has the possibility of hydrogen combustion and detonation in CFVS, the installation of an igniter inside the CFVS vessel may be considered in reducing such hydrogen risk.

• Geomechanics and Engineering
• /
• 제23권6호
• /
• pp.513-521
• /
• 2020

In this paper, due to the need for cutting cement-soil group pile composite foundation under the 7-story masonry structure of Zhenghe District and the shield tunnel of Zhengzhou Metro Line 5, a field test was conducted to directly cut cement-soil single pile composite foundation with diameter Ф=500 mm. Research results showed that the load transfer mechanism of composite foundation was not changed before and after shield tunnel cut the pile, and pile body and the soil between piles was still responsible for overburden load. The construction disturbance of shield cutting pile is a complicated mechanical process. The load carried by the original pile body was affected by the disturbance effect of pile cutting construction. Also, the fraction of the load carried by the original pile body was transferred to the soil between the piles and therefore, the bearing capacity of composite foundation was not decreased. Only the fractions of the load carried by pile and the soil between piles were distributed. On-site monitoring results showed that the settlement of pressure-bearing plates produced during shield cutting stage accounted for about 7% of total settlement. After the completion of pile cutting, the settlements of bearing plates generated by shield machine during residual pile composite foundation stage and shield machine tail were far away from residual pile composite foundation stage which accounted for about 15% and 74% of total settlement, respectively. In order to reduce the impact of shield cutting pile construction on the settlement of upper composite foundation, it was recommended to take measures such as optimization of shield construction parameters, radial grouting reinforcement and "clay shock" grouting within the disturbance range of shield cutting pile construction. Before pile cutting, the pile-soil stress ratio n of composite foundation was 2.437. After the shield cut pile is completed, the soil around the lining structure is gradually consolidated and reshaped, and residual pile composite foundation reaches a new state of force balance. This was because the condensation of grouting layer could increase the resistance of remaining pile end and friction resistance of the side of the pile.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제17권3호
• /
• pp.21-31
• /
• 2012

This paper presents the short-term and long-term measures to determine the fugitive dust concentration in a contaminated site, which is a crucial step for the determination of particulate emission factor (PEF) for risk assessment. As a long-term measure, USEPA method employing Q/C value (inverse of the ratio of the geometric mean air concentration to the emission flux at center of a 0.5-acre square source) seems to be suitable as it reflects regional-specific meteorological conditions. However, it requires nation-wide database collection and interpretation. Use of ASTM method is an alternative as a short-term measure. The method is readily field-applicable as PEF calculation equation is simple and input parameters can be easily derived at the site of interest as well without the nation-wide efforts. Using ASTM method, PEF at the Former Janghang Smelter Site was determined. According to various mode of aggregate size distribution and fractions of vegetative cover, which are the most important factors in PEF calculation, PEF values at the Former Janghang Smelter Site varied greatly. When the mode of aggregate size distribution was set at 0.25 mm, PEF values at the Former Janghang Smelter Site was 5~20 times higher than the default PEF value (i.e., 35 ${\mu}g/m^3$) shown in the current Korean Soil Contamination Risk Assessment Guidance. On contrast, when the mode was set at 2 mm, PEF values at the Former Janghang Smelter Site was 160~640 times lower than the default PEF value in the Korean Guidance.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권6호
• /
• pp.816-824
• /
• 2006

This study was conducted to evaluate the shoot height at which the yield and nutritive value of wormwood (Artemisia montana) is optimized in order to provide information on its potential to support animal production (Experiment 1). A second objective was to determine how the essential oil (EO) concentration in wormwood hay and silage differ (Experiment 2). In Experiment 1, Artemisia montana was harvested at five different shoot heights (20, 40, 60, 80 and 100 cm) from triplicate $1.8{\times}1.8m$ plots. Dry matter (DM) yield was measured at each harvest date and the harvested wormwood was botanically separated into leaf, stalk and whole plant fractions and analyzed for chemical composition and in vitro dry matter digestibility (DMD). Values for total digestible nutrients (TDN), digestible energy (DE) and metabolizable energy (ME) were subsequently calculated using prediction equations. Dry matter yields of stalk and whole plant increased linearly (p<0.001) and leaf yield increased quadratically (p<0.01) with shoot height, whereas the leaf/stalk ratio decreased linearly (p<0.001). As shoot height increased, there was a linear increase (p<0.001) in leaf DM, ether extract (EE) and neutral detergent fiber (NDF) contents and a quadratic increase (p<0.05) in leaf acid detergent fiber (ADF) and nitrogen free extract (NFE) contents, and stalk and whole plant DM (p<0.001), organic matter (OM, p<0.01 and p<0.05), NDF (p<0.001 and 0.05) and NFE (p<0.05) contents. However, there were decreases in leaf crude protein content (CP, quadratic, p<0.001) and stalk and whole plant EE content (linear, p<0.001), CP (quadratic, p<0.05) and ash (quadratic, p<0.05) contents. Digestibility of DM and TDN, and DE and ME value in leaves were not affected by increasing shoot height, but these measures linearly decreased (p<0.001) in stalk and whole plant. In Experiment 2, the hay had higher DM and CP concentrations, but lower EE concentration than the silage. Essential oil (EO) content in wormwood silage (0.49 g/100 g DM) was higher (p<0.05) than that in wormwood hay (0.32 g/100 g DM). Wormwood hay contained 25 essentail oils (EO) including camphor (10.4 g/100 g), 1-borneol (11.6 g/100 g) and caryophyllene oxide (27.7 g/100 g), and wormwood silage had 26 EO constituents including 3-cyclohexen-1-ol (8.1 g/100 g), trans-caryophyllene (8.6 g/100 g) and ${\gamma}$-selinene (16.8 g/100 g). It is concluded that the most ideal shoot height for harvesting wormwood is 60 cm based on the optimization of DM yield and nutritive value. Wormwood silage had a greater quantity and array of EO than wormwood hay.