• Journal of Korean Society of Transportation
• /
• v.33 no.4
• /
• pp.405-416
• /
• 2015

This paper developed a method analyze drivers' response characteristics using spectral analysis with car following data. Cross-correlation function and cross spectrum are produced by Fourier transform from speed fluctuations of leading vehicle and following vehicle during the designated time ${\tau}$. Based on the analysis data, a process to calculate the reaction time and stimulus-adaption index of following vehicle was developed and 170 cases of field data was applied. It was reported average of 0.654 and 2.091 seconds of stimulus-adaption index and reaction time respectively. In conclusion, the developed indexes might contribute to enhance vehicle control of autonomous vehicle more efficient and safer.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.26 no.2
• /
• pp.113-118
• /
• 2013

In this study, silk sericin films were prepared using different extraction methods, and the molecular conformation of sericin was examined using Fourier-transform infrared spectroscopy with attenuated total reflection geometry. Additionally, the effect of the film side (air-facing side or plate-facing side) on the molecular conformation of the sericin films was investigated. Interestingly, the molecular conformation of the sericin film depended on the film side. The molecular conformation of air-facing side of the sericin film was significantly influenced by extraction solution and time. The ${\beta}$-sheet crystallization and the crystallinity index of the sericin film markedly increased with an increase in the extraction time in hot water. The order of the crystallinity indices for the sericin films obtained with different extraction solutions was as follows: citric acid solution > urea solution >> hot water. In contrast, no remarkable differences were observed in the molecular conformation of the plate-facing side of the sericin film after extraction in hot water for different time periods. Urea and citric acid solution extractions showed remarkably higher crystallinity indices for sericin than those obtained after hot water extraction. However, no significant differences were observed in the crystallinity index of sericin between urea and citric acid solution extraction in plate-facing side of the film.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.26 no.1
• /
• pp.54-60
• /
• 2013

The partial degumming of silk has recently attracted researchers' attention because of its ability to produce silk textiles with new tactile properties, intermediate between the softness of fully degummed silk and the hardness of raw silk. However, it is difficult to obtain partially degummed silk in a homogenously degummed state due to the heterogeneous character of sericin removal. It is also difficult to examine the homogeneity of degumming. In the present study, Fourier transform infrared (FTIR) spectroscopy with attenuated total reflection (ATR) geometry was used to evaluate the effect of processing conditions on the degumming of silk yarns. The crystallinity index, calculated from FTIR spectra, showed an increase with the degumming ratio. Therefore, the homogeneity of degumming could be evaluated by the variation of crystallinity index for 30 different spots in silk yarns. The homogeneity of degumming was influenced by the total degumming time, the content of surfactant, and the liquor rate. No effect was observed upon changing the number of degumming cycles at the same total degumming time.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.381.1-381.1
• /
• 2014

In this study, we investigated the deposition behavior and the etch resistivity of plasma polymerized carbon hardmask (ppCHM) film with the variation of process temperature. The etch resistivity of deposited ppCHM film was analyzed by thickness measurement before and after direct contact reactive ion etching process. The physical and chemical properties of films were characterized on the Fourier transform infrared (FT-IR) spectroscope, Raman spectroscope, stress gauge, and ellipsometry. The deposition behavior of ppCHM process with the variation of temperature was correlated refractive index (n), extinction coefficient (k), intrinsic stress (MPa), and deposition rate (A/s) with the hydrocarbon concentration, graphite (G) and disordered (D) peak by analyzing the Raman and FT-IR spectrum. From this experiment we knew an optimal deposition condition for structure of carbon hardmask with the higher etch selectivity to oxide. It was shown the density of ppCHM film had 1.6~1.9 g/cm3 and its refractive index was 1.8~1.9 at process temperature, $300{\sim}600^{\circ}C$. The etch selectivity of ppCHM film was shown about 1:4~1:8 to undoped siliconoxide (USG) film (etch rate, 1300 A/min).

• Journal of the Korean institute of surface engineering
• /
• v.29 no.6
• /
• pp.781-787
• /
• 1996

Silicom oxide films with good water repellency were prepared by rf plasma-enhanced CVD (rf-PECVD) using four kinds of organosilicon compound, which had different number of methyl ($CH_3$) groups, and oxygen as gas sources. The differences in the deposition rates, film composition and film properties were studied in detail. Water repellency depended on the number of $CH_3$ groups in the organosilicon compounds and the partial pressure of oxygen in the plasma. The highest contact angle for water drops, about 95 degrees, was obtained when trimethy lmethoxy silane (TMMOS) was used. The contact angle decreased with the amount of oxygen gas introduced into the plasma. The dissociation of $CH_3$ groups by adding oxygen was comfirmed by Fourier transform infrared spectroscopy(FTIR) and X-ray photoelectron spectroscopy (XPS). The optical properties were estimated by double-beam spectroscopy and ellipsometry. The transmittance of the glass plate coated by the film prepared with tetramethoxy silane (TMOS) was about 90% and the refractive index of film was 1.44. This value was smaller than the refractive index of a glass plate(soda lime glass, refractive index is 1.515) and this film played a role of anti-refractive coating.

• Journal of The Korean Astronomical Society
• /
• v.37 no.5
• /
• pp.349-353
• /
• 2004

Magnetic fields are an important ingredient of galaxy clusters and are indirectly observed on cluster scales as radio haloes and radio relics. One promising method to shed light on the properties of cluster wide magnetic fields is the analysis of Faraday rotation maps of extended extragalactic radio sources. We developed a Fourier analysis for such Faraday rotation maps in order to determine the magnetic power spectra of cluster fields. In an advanced step, here we apply a Bayesian maximum likelihood method to the RM map of the north lobe of Hydra A on the basis of our Fourier analysis and derive the power spectrum of the cluster magnetic field. For Hydra A, we measure a spectral index of -5/3 over at least one order of magnitude implying Kolmogorov type turbulence. We find a dominant scale of about 3 kpc on which the magnetic power is concentrated, since the magnetic autocorrelation length is ${\lambda}_B = 3 {\pm} 0.5\;kpc$. Furthermore, we investigate the influences of the assumption about the sampling volume (described by a window function) on the magnetic power spectrum. The central magnetic field strength was determined to be ${\~}7{\pm}2{\mu}G$ for the most likely geometries.

• The Journal of the Korea Contents Association
• /
• v.7 no.8
• /
• pp.1-12
• /
• 2007

This paper presents a new demixing method that separates each source from a stereo sound mixture. Under the W-Disjoint Orthogonal assumption in DUET(Degenerate Unmixing Estimation Technique) algorithm. The proposed method is mainly processed in time-frequency domain by using windowed-fourier transform. In this paper there are two main contributions: a weighted mask by panning index distances and a binary mask by comparing each channel value. The former has tender demixing characteristic, and the latter has stronger demixing characteristic. In experimental results, we will show that both masks produce more robust demixing than the existing demixing methods do.

• Composites Research
• /
• v.20 no.6
• /
• pp.21-27
• /
• 2007

Low-velocity impact damage in a composite stiffened panel was detected using built-in piezoelectric active sensor arrays. Using these piezoelectric active sensors, various diagnostic signals were generated to propagate Lamb waves through the structure and the responses were picked up to detect changes in the structure's vibration signature due to the damage. Three algorithms - ADI(Active Damage Interrogation), TD RMS (Time Domain Root Mean Square) and STFT (Short Time Fourier Transform) - were examined to express the features of the signal changes as one damage index. From damage detecting tests, two impact induced delaminations were detected and the location was estimated with the algorithms and diagnostic signals.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.6
• /
• pp.472-480
• /
• 2009

This paper describes the overmodulative SVPWM technique and harmonics analyses of three phase NPC type three-level inverter to the modulation index. Three phase NPC type three-level inverter adopted SVPWM to extend the linear region to 0.907, moreover, the following voltage compensation using Fourier series was adopted in the region of overmodulation to make it work to six-step level. PD type of multi carrier method is used with the double Fourier series for the analysis of output power harmonics characteristic. Simulation was performed by PSIM, and the harmonics characteristics of 3-level inverter in each region are analyzed. The side band harmonics of carrier frequency are dominant in the linear region, but these harmonic components are decreased as the inveter goes to overmodulation region, and the harmonics due to the fundamental frequency is increased gradually at the same time. The harmonic analyses are verified through the simulation and experimental results under the same condition.

• Korean Journal of Remote Sensing
• /
• v.27 no.3
• /
• pp.329-338
• /
• 2011

The time-series normalized difference vegetation index (NDVI) product has proven to be a powerful tool to investigate the phenological information because it can monitor the change of the forests with very high time-resolution, This study described the application of the DFT analysis over the 9 year MODIS data for the identification of the two types of vegetation cover, Pinus densiflora(Pd) and Querqus mongolica(Qm) which are dominant species of evergreen and broadleaved deciduous forest, respectively, The total number of samples was 5148 reference cycles which consist of 2160 Pd and 2988 Qm. They were extracted from the pixel-based MODIS scenes over the 9 years from 2000 to 2008 of South Korea. The DFT analysis was mainly focused on the 0th and $1^{st}$ harmonic components, each of which represents the mean value and the variation amplitude of the NDVI over the years, respectively. The $0^{th}$ harmonic values of the vegetation Pd and Qm averaged over the 9 years were 0.74 and 0.65, respectively. This implies that Pd has a higher NDVI than Qm. Similarly obtained $1^{st}$ harmonic values of Pd and Qm were 0.19 and 0.27, respectively. This can be intuitively understood considering that the seasonal variation of Qm is much larger than Pd. This distinctive difference of the $1^{st}$ harmonic value has been used to identify evergreen and deciduous forests. Overall agreement between the Fourier analysis-based map and the actal vegetation map has been estimated to be as high as 75%. This study found that the DFT analysis can be a concise and repeatable method to separate and trace the changes of evergreen and deciduous forest using the annual NDVI cycles.