• 한국초전도ㆍ저온공학회논문지
• /
• 제4권1호
• /
• pp.73-77
• /
• 2002

The variation of critical current by the formation of crack in a high temperature super-conducting tape was studied by experimental and numerical analyses. The current-voltage relation of HTS tape is measured by the four-point measurement method. Numerical analyses are used to solve two dimensional heat conduction equation, considering the temperature distribution. By comparing current-voltage relation of experimental and numerical results, the validity of numerical method is verified.

• 한국전자통신학회논문지
• /
• 제7권2호
• /
• pp.401-407
• /
• 2012

본 논문에서는 대표적인 이동 로봇의 장애물 회피 방법들의 성능을 분석한다. 이를 위해 장애물 회피 성능 지수로서 목표점까지 이동한 거리, 이동 시간, 장애물과의 거리, 로봇 동작의 평활도(smoothness)를 제시한다. 특히 로봇 동작의 평활도는 로봇 동작 시 조향 방향의 각가속도와 저크(jerk)를 사용하여 로봇의 실질적 이동 효율성을 측정하는 성능 지수이다. 주어진 성능 지수에 의하여 4가지의 주요한 장애물 회피 방법을 비교하였다. 주요한 장애물 회피 방법은 인공 전위계 방법, 탄성력(elastic force) 방법, 가상 거리(virtual distance)에 의한 인공전위계 방법, 그리고 가상 거리에 의한 탄성력 방법이다. 시뮬레이션을 통하여 각 방법의 성능을 비교 분석하여 각각의 장애물 회피 특성을 파악하였다.

• 대한물리치료과학회지
• /
• 제3권3호
• /
• pp.71-85
• /
• 1996

The Quality of physical therapy school system has conflicts between physical therpist, and reduces the opportunity of seguential education. So this study was investigated in order to made concrete the problems of educational duality, set up the direction of the school system's improvement, as like the four-year system and recognized the necessity. The curriculums of 13 colleges and 5 universities was analyzed. The curriculum analysis was made up the comparison and the analysis by a liberal arts point, a major point, a clinical practice point, total opening subjects, and so on. The analyzing results were as follows. 1. The average rates of a liberal arts vs. a major opening point are 17:83 in college, and are 27:73 in university. 2. It is a serious problem that college are lower than university in a liberal arts. The best method that can solve it is lengthen the number of school years. 3. There is no difference between college and university in a major subject. Rather college has the more subject's numbers than university. 4. There is no difference between college and university in a clinical practice. Above results suggests that there is not different between college and university in a major subject except for a liberal arts point. It is proper that one should be unificate the curriculum according to the sameness between a state examination and a license. Therefore, it is necessary for graduates from college that provides the opportunity of proceeding to a higher school, demands the seguential system of study cultivating and producing a bachelor, and requires the continual education in a clinical field, a bachelor admitting system of continual education, and clinical therapist's qualification. The present physical therapy educational systems should be unificated because of many right reasons. On the other hand, the follw-up study that improving the school system about the four-years and the more physical therapy should be continue from the viewpoint of education.

• 한국정보처리학회논문지
• /
• 제6권11호
• /
• pp.3140-3149
• /
• 1999

Skew correction for document images can be using a rotational transformation of pixel coordinates. In this paper we propose a method which corrects the document skew, by an amount of $\theta$ degrees, using block information, where the block is defined as a rectangular area containing adjacent black pixels. Processing speed of the proposed method is faster than that of the method using pixel transformation, since the number of floating-point operations can be reduced significantly. In the proposed method, we rotate only the four corner points of each block, and then identify the pixels inside the block. Two methods for inside pixel identification are proposed; the first method finds two points intersecting the boundary of the rotated block in each row, and determines the pixels between the two intersection points as the inside pixel. The second method finds boundary points based on Bresenham's line drawing algorithm, using fixed-point operation, and fills the region surrounded by these boundaries as black pixels. We have measured the performance of the proposed method by experimenting it with 2,016 images of various English and Korean documents. We have also proven the superiority of our algorithm through performance comparison with respect to existing methods based on pixel transformation.

• 전자공학회논문지
• /
• 제53권4호
• /
• pp.117-128
• /
• 2016

대지의 접지 시스템 설치는 안전성과 전기 기기의 올바른 작동을 위해 필수적이며, 대지 파라미터, 특히 토양의 저항률은 대지 접지 시스템 설계에서 결정되어야 한다. 토양의 저항률을 측정하기 위한 가장 흔한 방법은 Wenner의 4전극 방법이 있으며, 이 방법은 1차원의 저항률을 얻기 위하여 가변 전극 간격을 갖는 큰 측정 세트가 요구되어 번거롭고, 시간소모가 많으며 비용이 많이 든다. 전기 저항 단층촬영법은 저비용이며 빠른 측정이 가능하다는 장점 때문에 토양의 저항률 분포를 추정하기 위해 적용될 수 있다. 전기 저항 단층은 관심지역에 놓인 전극에서 얻은 측정데이터를 사용하여 토양 저항률 분포를 특성화한다. 이때 전기 단층 촬영법의 역문제는 비선형성이 강하여 저항률 분포를 추정하기 위하여 Tikhonov 조정 방법을 갖는 반복적 Gauss-Newton 방법을 사용한다. 다양한 시뮬레이션을 수행하여 3차원 토양의 저항률 분포를 추정하는데 전기 저항 단층 촬영법은 유용한 성능을 제공하고 있음을 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.644-649
• /
• 1993

Practical structures are subject not only to tension but also to shear and torsional loading. In this study, the mode 1 and 2 stress intensity factors of specimens were calculated by using elastic finite element mothod. The stress fields at the crack tip subjected to mixed-mode loading were also studied by usingf eleatic finite element method and were compared with theoretical results. The three-point-bending, four-point-bending, and mixed-mode-loading experiment were carried out. And, crack propagation rate da/dN and crack growth direction were examined. Also, the elastic finite element method was applied to calculate the stress intensity factors of branch crack tip and we relate the stress intenity factor range of branch crack tip(the result of FEM) to crack propagation rate(the experimental result). The .DELTA. -da/dN relation corelated with that of mode 1.

• 대한토목학회논문집
• /
• 제4권2호
• /
• pp.35-43
• /
• 1984

본 연구(硏究)의 목적(目的)은 개수로(開水路)의 수위(水位)의 변동(變動)에 따른 자유(自由) 지하수면(地下水面)과 개수로(開水路)에 작용(作用)하는 부정압력(不定壓力)의 분포(分布)를 계산(計算)할 수 있는 수치(數値) 모형(模型)을 개발(開發)하는데 있다. Diagnostic Eq.은 Point SOR 방법에 의해서, 그리고 Prognostic Eq.은 Implicit Lax-Wendroff 방법에 의하여 해석하였다. Simulation 조건들에서 지하수(地下水) 침투면(浸透面)의 변화를 예측(豫測)하기 위하여 투수성(透水性) 및 불투수성개수로(不透水性開水路)에 대하여 네가지 다른 경우에 대한 결과(結果)를 나타내었다.

• Applied Microscopy
• /
• 제25권3호
• /
• pp.33-39
• /
• 1995

To compare the quality of ultrastructural preservation of Scanning Electron Microscopic specimens dried with different methods; pure air-drying, air-drying with using Tetramethylsilane(TMS), four kind of air-drying using Hexamethyldisilazane(HMDS) and critical point drying(CPD), we conducted scanning electron microscopic observation on liver, skeletal muscle and intestinal tissues from laboratory rat treated with each method. In pure air drying group, severe distortion of tissue surface was observed, and in HMDS treated group, only liver tissue showed slight distortion. But in TMS treated group, each tissue showed a good presentation comparable to CPD group. The results suggest that the method of air-drying using TMS may be the former is less expensive and simple be and also time-saving.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.131-134
• /
• 2002

The optimum design technology using combind F.E.M and eauivalent circuit is so fast and accurate that it can be applied to the optimum rotor design of an inverter-fed induction motor in high efficiency motor making industry. The optimum characteristics fer a rotor slot model of a 3 phase inverter-134 nduction motor was previously verified by a time-step F.E.M. In this paper, four verification models with the design variables near the optimum point are designed to chech whether the characteristics of a slot model presented is not less than those of the near models. The outputs of whole models are analyzed in a time-step Finite Element Method and compared in the experimental test. The economical and efficient selecting method of design variables fur the computer simulation and experimental test is presented in order to assure the optimum point.

• 소성∙가공
• /
• 제19권4호
• /
• pp.248-252
• /
• 2010

In this paper, three-dimensional finite element analysis of thread rolling process of a 12 point flange head bolt is conducted using a rigid-plastic finite element method based metal forming simulator AFDEX 3D. A whole sequence of cold forming processes of a long shaft bolt composed of four forging stages and final thread rolling process is simulated to reveal the mechanism of thread formation. A mesh density control function is applied near the major plastic deformation region to achieve computational efficiency. It has been shown both numerically and experimentally that longitudinal lengthening or shortening is negligible in thread rolling.