• Magazine of the Korean Society of Agricultural Engineers
• /
• v.28 no.2
• /
• pp.53-62
• /
• 1986

An Idea of Standard Rural Area(SRA), the rural areas which have higher ruralities of the rice cropping region and also higher urban characteristics, was conceptualized to develop the tentative basic indices necessary for rural settlement design in reclaimed land. The SRA's were determined by a technique of the principal component analysis with relevant data from 81 counties or cities located in the west side of Korea(Chon-Nam,Chon-Buk, Chung-Nam, Kyung-Ki Do).By the definition of the SRA, the principal component analysis is seperately carried out by two subworks, analyses of rurality and urban characteristics. From the analysis, rurality of the SRA is characterized by four components which appears to describe the scale of farm management, intensive farming, soundness of farming and farming basis on rice cropping, while urban characteristics of the SRA by three components to describe the accessibility, keeping ratio of infrastructures and level of medical services. Through grouping and synthesizing two characteristics of all counties by each component score, 24 counties were classified as urban-rural harmonized region which is the same result as that obtained from the extraction index being more than 50% of available area to total area except 1 county. Therefore, SRA is defined as the group of counties having more than 50% of available area to total area.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.2
• /
• pp.211-224
• /
• 1994

In this paper, a multi-level adaptive intraframe method has been proposed to separate the luminance and chominance components in NTSC composite signal. The control signals are generated by detecting the vertical correlation and transition in the horizontal and diagonal directions. The chrominance component is adaptively processed through vertical and horizontal filters according to the control signals and the luminance component is processed by subtracting the chrominance component from the composite video signal. The several filters have been used at the sampling rate of four times the color subcarrier frequency and computer simulation and SVP(Serial Video Processing) system have been introduced to compare the performance of the conventional methods and that of proposed one.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.52.1-52.1
• /
• 2016

The Gamma-Ray Bursts (GRBs) are classified into the long GRBs (LGRBs) and the short GRBs (SGRBs). Their progenitors are expected to be different because they have its own distinct characteristics. Occasionally, the SGRBs having faint extended emission (EGRBs) are observed. The EGRBs exhibit the analogous properties that the SGRBs have, but observed T90 of the EGRBs is longer than two seconds as the LGRBs. Because the EGRBs have characteristics of the LGRBs and the SGRBs, study of the EGRBs is important to understand origins of the GRBs. In this study, we obtain the luminosity relations of the EGRBs observed by Swift/BAT. We compare these results with luminosity relations on the LGRBs and SGRBs. In addition, we examine the spectral lag relations of spike and extended emission component of the EGRBs detected by CGRO/BATSE, Konus/WIND, Swift/BAT, Fermi/GBM and compare to each other. We find that the luminosity relations of the EGRBs present different results with the LGRBs and the SGRBs. In the spectral lag relations, extended emission component expresses opposite results compared with spike component. Furthermore, the spectral lag relations from the four instruments came up with different outcomes to each other.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.2
• /
• pp.167-173
• /
• 2004

Fouling of heat exchangers is generated by water-borne deposits, commonly known as foulants including particulate matter from the air, migrated corrosion produces; silt, clays, and sand suspended in water; organic contaminants; and boron based deposits in plants. The fouling is known to interfere with normal flow characteristics and reduce thermal efficiencies of heat exchangers. This paper describes the fouling analysis technique developed in this study which can analyze the thermal performance for heat exchangers and estimate the future fouling variations. To develop the fouling analysis technique fur heat exchangers, fouling factor was introduced based on the ASME O&M codes and TEMA standards. For the purpose or verifying the fouling analysis technique, the routing analyses were performed for four heat exchangers in several nuclear power plants; two residual heat removal heat exchangers of the residual heat removal system and two component cooling water heat exchangers of the component cooling water system.

• Journal of Life Science
• /
• v.14 no.1
• /
• pp.57-60
• /
• 2004

To get basic information on the Korea local corn lines collected from Busan and Gyungnam Province, a total of 49 lines were classified by the principal component analysis method. The lines were classified into 4 lineal groups by the taxonomic distance. Croup I included 11 lines, and groupII, groupIII and groupIV included 20 lines, 14 lines and 4 lines, respectively. Four groups could be characterized as follows: Croup I : early maturity, short plant, small ears, small kernels, low tillering and medium yielding. Croup II : early maturity, tall plant, large ears, large kernels, multi-ears, low tillering and high yielding. GroupIII: late maturity, short plant, small ears, small kernels, high tillering and low yielding. Croup W medium maturity, tall plant, large ears, small kernels, prolific ears, high tillering and higher yielding.

• Journal of the Korean Chemical Society
• /
• v.36 no.1
• /
• pp.113-124
• /
• 1992

The pattern recognition methods of chemometrics have been applied to multivariate data, for which ninety four Korean ancient glass pieces have been determined for 12 elements by neutron activation analysis. For the purpose, principal component analysis and non-linear mapping have been used as the unsupervised learning methods. As the result, the glass samples have been classified into 6 classes. The SIMCA (statistical isolinear multiple component analysis), adopted as a supervised learning method, has been applied to the 6 training set and the test set. The results of the 6 training set were in accord with the results by principal component analysis and non-linear mapping. For test set, 17 of 33 samples were each allocated to one of the 6 training set.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.6
• /
• pp.629-635
• /
• 2009

In this research, KP-4, one of the plastic mold steels, was coated with the AlTiN from one layer to four layers by the PVD method in the $\Phi$ 8mm cemented carbide ball end mill. Coated KP-4 was processed with various conditions. For example, slope of $15^{\circ}$, $30^{\circ}$ and $45^{\circ}$ the spindle rotation speed was changed from 10,000rpm to 16,000rpm, the tool feeding speed was changed from 1,300mm/min to 1,700mm/min, the depth of cut was also changed from 0.3mm to 0.9mm, and etc. Cutting component force according to the coating layer number, and surface roughness were studied. The cutting component force showed a good agreement better the up ward direction than the down ward direction under all experimental conditions. In case of the condition per the material shape, it was lessen when the tool have larger angle because the average effective diameter of the tool is larger. The surface roughness showed good condition in case of the up ward than the down ward direction. And, in the 3rd layer of AlTiN coating, it showed the most suitable condition.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.6
• /
• pp.331-337
• /
• 2013

An experimental study on the performance of a liquid electric component cooling system was performed. The thermal resistance and pressure drop at a heat sink were measured, for aluminum waterblocks with four different internal shapes, with either smooth surface, porous media filling, or with fins of 5 mm height, or of 7 mm height. The fins had 0.5 mm thickness, and the gap between the fins was 0.5 mm. The waterblock internal dimension was $36.5{\times}36.5{\times}7mm$. Compared with the waterblock with smooth surface, the thermal resistance reduction was 11%, 46%, and 42% for waterblocks with porous media filling, 5 mm, and 7 mm fins, respectively. A new dimensionless parameter was suggested to evaluate the waterblock performance, with the simultaneous consideration of thermal resistance and pressure drop. The performance of the waterblock with fins of 5 mm height was best by parameter.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.2
• /
• pp.215-222
• /
• 2002

As the GPS signals propagate from the GPS satellites to the receivers on the ground, they are delayed by the atmosphere. The tropospheric delay consists of two components. The hydrostatic (or "dry") component that is dependent on the dry air gasses in the atmosphere and accounts for approximately 90% of the delay. And the "wet" component that depends on the moisture content of the atmosphere and accounts for the remaining effect of the delay. The Zenith Hydrostatic Delay (ZHD) can be calculated from the local surface pressure. The Total Zenith Delay (TZD) will be estimated and the wet component extracted later. Integrated water Vapor (IWV) gives the total amount of water vapor that a signal from the zenith direction would encounter. Precipitable Water Vapor (PWV) is the IWV scaled by the density of water. The quality of this PWV has been verified by comparison with radiosonde data(at Osan). We processed data for JULY 2 and JULY 14, 1999 from four stations(Cheju, Kwangju, Suwon, Daegu). We found the coincidence between PWV of the estimations using GPS and PWV of pressing the radiosonde data. The average of the difference between PWV using GPS and PWV using radiosonde was 3.77 mm(Std. ＝ $\pm$0.013 mm) and 2.70 mm(Std. = $\pm$0.0011 mm) at Suwon & Kwangju.

• Journal of Power System Engineering
• /
• v.9 no.3
• /
• pp.15-20
• /
• 2005

In this paper, the effect of oxygen component in fuel on the exhaust emissions has been investigated for an indirect injection diesel engine. It was tested to estimate change of engine performance and exhaust emission characteristics for the commercial diesel fuel and oxygenated blended fuel which has four kinds of mixed ratio. And, the effects of exhaust gas recirculation(EGR) on the characteristics of NOx emission have been investigated. Ethylene glycol mono-n-butyl ether(EGBE) contains oxygen component 27% in itself, and it is a kind of effective oxygenated fuel of mono-ether group that the smoke emission of EGBE is reduced remarkably compared with commercial diesel fuel, that is, it can supply oxygen component sufficiently at higher loads and speeds in diesel engine. It was found that simultaneous reduction of smoke and NOx was achieved with oxygenated fuel(10vol-%) and cooled EGR method(10%).