• Journal of KIISE:Information Networking
• /
• v.28 no.2
• /
• pp.262-276
• /
• 2001

Recently much research for developing forwarding table that support fast router without employing both special hardware and new protocols. This article introduces a new forwarding data structure based on the software to enable forwarding lookup to be penormed at giga-bit speed. The forwarding table is known as a bottleneck of the routers penormance due to its high complexity proportional to the forwarding table size. The recent research that based on the software uses a Patricia trie and its variants. and also uses a hash function with prefix length key and others. The proposed forwarding table structure construct a forwarding table by the bit stream array in which it constructs trie from routing table prefix entries and it represents each pointer pointing the child node and the associated forwarding table entry with one bit The trie structure and routing prefix pointer need a large memory when representing those by linked-list or array. but in the proposed data structure, the needed memory size is small enough since it represents information with one bit. Additionally, by use a lookup method that start searching at desired middle level we can shorten the search path. The introduced data structure. called bit-map trie shows that we can implement a fast forwarding engine on the conventional Pentium processor by reducing the backbone routing table fits into Level 2 cache of Pentium II processor and shortens the searching path. Our experiments to evaluate the performance of proposed method show that this bit-map trie accomplishes 5.7 million lookups per second.

• Journal of KIISE:Information Networking
• /
• v.30 no.2
• /
• pp.282-292
• /
• 2003

This paper proposes an efficient data structure for forwarding IPv4 and IPv6 packets at the gigabit speed in backbone routers. The LPM(Longest Prefix Matching) search becomes a bottleneck of routers' performance since the LPM complexity grows in proportion to the forwarding table size and the address length. To speed up the forwarding process, this paper introduces a data structure named BMT(Bit-Map Tie) to minimize the frequent main memory accesses. All the necessary search computations in BMT are done over a small index table stored at cache. To build the small index table from the tie representation of the forwarding table, BMT represents a link pointer to the child node and a node pointer to the corresponding entry in the forwarding table with one bit respectively. To improve the poor performance of the conventional tries when their height becomes higher due to the increase of the address length, BMT adopts a binary search algorithm for determining the appropriate level of tries to start. The simulation experiments show that BMT compacts the IPv4 backbone routers' forwarding table into a small one less than 512-kbyte and achieves the average speed of 250ns/packet on Pentium II processors, which is almost the same performance as the fastest conventional lookup algorithms.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.4
• /
• pp.529-546
• /
• 2010

Greedy forwarding is the key mechanism of geographic routing and is one of the protocols used most commonly in wireless sensor networks. Greedy forwarding uses 1-hop local information to forward packets to the destination and does not have to maintain the routing table, and thus it takes small overhead and has excellent scalability. However, the signal intensity reduces exponentially with the distance in realistic wireless sensor network, and greedy forwarding consumes a lot of energy, since it forwards the packets to the neighbor node closest to the destination. Previous proposed greedy forwarding protocols are the sender-based greedy forwarding that a sender selects a neighbor node to forward packets as the forwarding node and hence they cannot guarantee energy efficient forwarding in unpredictable wireless environment. In this paper, we propose the receiver-based greedy forwarding called RGF where one of the neighbor nodes that received the packet forwards it by itself. In RGF, sender selects several energy efficient nodes as candidate forwarding nodes and decides forwarding priority of them in order to prevent unnecessary transmissions. The simulation results show that RGF improves delivery rate up to maximum 66.8% and energy efficiency, 60.9% compared with existing sender-based greedy forwarding.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.175-178
• /
• 2004

This paper describes a new IP address lookup algorithm using a binary search on multiple balanced trees stored in one memory. The proposed scheme has 3 different tables; a range table, a main table, and multiple sub-tables. The range table includes $2^8$ entries of 22 bits wide. Each of the main table and sub-table entries is composed of fields for a prefix, a prefix length, the number of sub-table entries, a sub-table pointer, and a forwarding RAM pointer. Binary searches are performed in the main table and the multiple sub-tables in sequence. Address lookups in our proposed scheme are achieved by memory access times of 11 in average, 1 in minimum, and 24 in maximum using 267 Kbytes of memory for 38.000 prefixes. Hence the forwarding table of the proposed scheme is stored into L2 cache, and the address lookup algorithm is implemented in software running on general purpose processor. Since the proposed scheme only depends on the number of prefixes not the length of prefixes, it is easily scaled to IPv6.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.2B
• /
• pp.138-143
• /
• 2003

One of the important design issues for IP routers responsible for packet forwarding in computer networks is the route-lookup mechanism. For each incoming packet, IP routing requires that a router performs a longest-prefix-match address lookup in order to determine the next hop that the incoming packet should be forwarded to. In this paper, we present a new scheme which applies the hashing function for IP address lookup. In the proposed scheme, the forwarding table is composed of multiple SRAMs, and each SRAM represents an address lookup table in each prefix. Hashing function is applied in order to find out the matching entries from the address lookup tables in parallel, and the entry with the longest prefix match among them is selected. Simulation using the MAE-WEST router example shows that a large routing table with 37000 entries can be compacted to a forwarding table of 300 Kbytes in the proposed scheme. It is also shown that the proposed scheme achieves one route lookup every 1.93 memory accesses in average.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.6
• /
• pp.1096-1101
• /
• 2004

By a tremendous expansion of Internet users, there's a number effects that cause the phenomenon of bottlenecked switching packets from routers. In order to tear down this problem, distributed system is applicable to almost every highly performed router systems. The main processor of distributed system, which manages routing table, commands IPC to delivering the forwarding table line processor that eases functionalities of the router. This makes the system having wired-speed forwarding function based on the hardware so that the performance of the network can be enhanced. Therefore, IPC, which assign a part of router, is necessary to exchange data smoothly and the constitution of IPC using Ethernet is widely adapted as a method for saving investment. In this paper, R-IPC mechanism improve the packet-processing rate over 10% through changed from defect of conventional Ethernet IPC, that is, 2 layer processing to TCP/IP or UDP/ IP into 1 layer processing for efficient packet forwarding.

• Journal of information and communication convergence engineering
• /
• v.11 no.2
• /
• pp.82-94
• /
• 2013

In this paper, we propose a novel tunnel-free scheme in a proxy mobile IPv6 (PMIPv6)-based nested network mobility environment; several mobile nodes (MNs) and mobile routers (MRs) compose a hierarchical wireless network topology. Because tunnels created by several MRs overlap and data packets travel along several local mobility anchors (LMAs), the utilization of the wireless section is reduced and the packet forwarding path of the wire-line section is not optimal. In our tunnel-free scheme, the mobile access gateway (MAG) plays an important role in both the wireless and wire-line sections. Using a local binding update, this tunnel-free scheme forwards data packets with a host-based routing table without any tunnel. Establishing a direct tunnel between the MAG and the last LMA, this scheme removes nested tunnels between intermediate LMAs and MRs, and optimizes the forwarding path to the MN in the wire-line section.

• The KIPS Transactions:PartA
• /
• v.11A no.2
• /
• pp.129-142
• /
• 2004

As the Internet gets faster, the demand for high-speed routers that are capable of forwarding more than giga bits of data per second keeps increasing. In the previous research, Bitmap Trie algorithm was developed to rapidly execute LPM(longest prefix matching) process which is Well known as the Severe performance bottleneck. In this paper, we introduce a novel algorithm that drastically enhanced the performance of Bitmap. Trie algorithm by applying three techniques. First, a new table called the Count Table was devised. Owing to this table, we successfully eliminated shift operations that was the main cause of performance degradation in Bitmap Trie algorithm. Second, memory utilization was improved by removing redundant forwarding information from the Transfer Table. Lastly. the range of prefix lookup was diversified to optimize data accesses. On the other hand, the processing delays were classified into three categories according to their causes. They were, then, measured through the execution-driven simulation that provides the higher quality of the results than any other simulation techniques. We tried to assure the reliability of the experimental results by comparing with those that collected from the real system. Finally the Enhanced Bitmap Trie algorithm reduced 82% of time spent in previous algorithm.

• The KIPS Transactions:PartA
• /
• v.10A no.5
• /
• pp.453-462
• /
• 2003

IP address lookup of router searches and decide proper output link using destination address of IP packet that arrie into router. The IP address lookup is essential part in te development of high-speed router needed to high-speed backbone network as one of bottleneck of router performance. This paper introduces DTC data structure that can support gigabit IP address lookup by dynamic trie compression technique that just uses small memory in conventional Pentium CPU. When make a forwarding table by trie compression, the DTC can dynamically select a size of data structure with considering correlation between table's size and searching speed. Also, when compress the prefix trie, DTC makes IP address lookup on the forwarding table of a search on the high speed SRAM cache by minimizing the size of data structure reflecting the structure of the trie. In the experiment result, the DTC data structure recorded performance of maximum $12.5{\times}10^5$ LPS (lookup per second) in conventional Pentium CPU through a dynamic building of most suitable compression over variety of routing tables.

• The KIPS Transactions:PartC
• /
• v.9C no.1
• /
• pp.141-148
• /
• 2002

In this paper, we study the various performance of Distributed QoS Routing according to how many level of routing table information in router. And we study Flooding and recently proposed 2-level forwarding, and compare with performance of implicit 3-level forwarding. Performance factors are message overhead that is generated on Distributed QoS Routing and Route Setup success Rate, Connection blocking rate, Network Utilization. They can decide the accuracy of routing information in rouser. Our simulation shows that more level of routing table information have, lower message overhead generate but lower performance at other factors because of inaccuracy of routing information.