• Transactions on Electrical and Electronic Materials
• /
• 제2권1호
• /
• pp.32-38
• /
• 2001

A new small sized Lateral Trench electrode Insulated Gate Bipolar Transistor(LTEIGBT) was proposed to improve the characteristics of conventional Lateral IGBT (LIGBT) and Lateral Trench gate IGBT (LTIGBT). The entire electrode of LTEIGBT was replace with trench-type electrode. The LTEIGBT was designed so that the width of device was no more than 19 ㎛. The Latch-up current densities of LIGBT, LTIGBT and the proposed LTEIGBT were 120A/㎠, 540A/㎠, and 1230A/㎠, respectively. The enhanced latch-up capability of the LTEIGBT was obtained through holes in the current directly reaching the cathode via the p+ cathode layer underneath n+ cathode layer. The forward blocking voltage of the LTEIGBT is 130V. Conventional LIGBT and LTIGBT of the same size were no more than 60V and 100V, respectively. Because the the proposed device was constructed of trench-type electrodes, the electric field moved toward trench-oxide layer, and punch through breakdown of LTEIGBT is occurred, lately.

• 대한기계학회논문집
• /
• 제15권6호
• /
• pp.2083-2099
• /
• 1991

본 연구에서는 다른 실험 조건은 일정하게 유지하면서 아래 벽면의 표면조도 를 체계적으로 변화시켜 표면조도가 후향계단 뒤의 재부착 흐름 및 재발달경계층에 미 치는 영향을 조사하고자 하며 구체적인 내응은 다음과 같다. (1) 표면조도가 재부착 길이와 재발달경계층에 미치는 영향의 조사. (2) 표면조도가 평균속도와 난류량 분포 에 미치는 영향의 조사. (3) 여러 종류 표면조도 변화에 따른 재부착길이와 재발달 경 계층 회복에 미치는 영향과 결과의 상호 비교.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.338-341
• /
• 2002

A new small size Lateral Trench Electrode Insulated Gate Bipolar Transistor (LTEIGBT) is proposed and fabricated to improve the characteristics of device. The entire electrode of LTEIGBT is placed to trench type electrode. The LTEIGBT is designed so that the width of device is 19$\mu\textrm{m}$. The latch-up current density of the proposed LTEIGBT is improved by 10 and 2 times with those of the conventional LIGET and LTIGBT The forward blocking voltage of the LTEIGBT is 130V. At the same size, those of conventional LIGBT and LTIGBT are 60V and 100V, respectively. Because that the electrodes of the proposed device is formed of trench type, the electric field in the device are crowded to trench oxide. We fabricated He proposed LTEIGBT after the device and process simulation was finished. When the gate voltage is applied 12V, the forward conduction currents of the proposed LTEIGBT and the conventional LIGBT are 80mA and 70mA, respectively, at the same breakdown voltage of 150V,

• 상하수도학회지
• /
• 제30권4호
• /
• pp.417-425
• /
• 2016

Desalination is a key technology to overcome water shortage problem in a near future. High energy consumption is an Achilles' heel in desalination technology. Osmotically driven membrane processes like forward osmosis(FO) was introduced to address this energy issue. Characterizing membrane properties such as water permeability(A), salt permeability(B), and the resistance to salt diffusion within the support layer($K_{ICP}$) are very important to predict the performance of scaled-up FO processes. Currently, most of researches reported that the water permeability of FO membrane was measured by reverse osmosis(RO) type test. Permeating direction of RO and FO are different and RO test needs hydraulic pressure so that several problems can be occurred(i.e. membrane deformation, compaction and effect of concentration polarization). This study focuses on measuring water permeability of FO membrane by FO type test results in various experimental conditions. A statistical approach was developed to evaluate the three FO membrane properties(A, B, and $K_{ICP}$) and it predicted test result by the internal and external concentration polarization model.

• 한국전기전자재료학회논문지
• /
• 제15권9호
• /
• pp.758-763
• /
• 2002

A new small size Lateral Trench Electrode Insulated Gate Bipolar Transistor (LTEIGBT) is proposed and fabricated to improve the characteristics of device. The entire electrode of LTEIGBT is placed to trench type electrode. The LTEIGBT is designed so that the width of device is 19w. The latch-up current density of the proposed LTEIGBT is improved by 10 and 2 times with those of the conventional LIGBT and LTIGBT. The forward blocking voltage of the LTEIGBT is 130V. At the same size, those of conventional LIGBT and TIGBT are 60V and 100V, respectively. Because the electrodes of the proposed device is formed of trench type, the electric field in the device are crowded to trench oxide. When the gate voltage is applied 12V, the forward conduction currents of the proposed LTEIGBT and the conventional LIGBT are 80mA and 70mA, respectively, at the same breakdown voltage of 150V.

• Transactions on Electrical and Electronic Materials
• /
• 제16권3호
• /
• pp.151-155
• /
• 2015

We fabricated the Cu Schottky contact on an n-type Ge wafer and investigated the forward bias current-voltage (I-V) characteristics in the temperature range of 100~300 K. The zero bias barrier height and ideality factor were determined based on the thermionic emission (TE) model. The barrier height increased and the ideality factor decreased with increasing temperature. Such temperature dependence of the barrier height and the ideality factor was associated with spatially inhomogeneous Schottky barriers. A notable deviation from the theoretical Richardson constant (140.0 Acm^-2K^-2 for n-Ge) on the conventional Richardson plot was alleviated by using the modified Richardson plot, which yielded the Richardson constant of 392.5 Acm^-2K^-2. Finally, we applied the theory of space-charge-limitedcurrent (SCLC) transport to the high forward bias region to find the density of localized defect states (N_t), which was determined to be 1.46 × 10¹² eV^-1cm^-3.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권4호
• /
• pp.486-493
• /
• 2000

Flow mechanism around air flow sensor of electronic control engine, especially Karman vortex type, was investigated experimentally. The two-dimensional flow characteristics in the intermediate wake region behind a triangular vortex-generator respectively apex forward facing, apex backward facing and vertical flat plates following after apex forward facing(i.e vortex-flowmeter) were investigated at Reynolods number of $ReH=1.4\times10^4$; H is the width of a triangular vortex-generator. The vortex shedding frequency for wide Reynolds number from $7\times10^3$ to $2.1\times10^4$ was also surveyed. The velocity component was measured by X-type hot wire anemometer at 8H downstream from the bluff body. The coherent structure of the intermediate wake behind a bluff body was obtained by conditional phase average technique. As a result, it was verified that the vertical flat plates following after apex forward triangular vortex-generator make not only more linear relation between free stream velocity and vortex shedding frequency but also more periodic vortex in the vicinity of the center of wake.

• Advances in concrete construction
• /
• 제13권5호
• /
• pp.367-376
• /
• 2022

Theoretical study of vibration distinctiveness of rotating cylindrical are examined for three volume fraction laws viz.: polynomial, exponential and trigonometric. These laws control functionally graded material composition in the shell radius direction. Functionally graded materials are controlled from two or more materials. In practice functionally graded material comprised of two constituent materials is used to form a cylindrical shell. For the current shell problem stainless steel and nickel are used for the shell structure. A functionally graded cylindrical shell is sanctioned into two types by interchanging order of constituent materials from inner and outer side for Type I and Type II cylindrical shell arrangement. Fabric composition of a functionally graded material in a shell thickness direction is controlled by volume fraction law. Variation of power law exponent brings change in frequency values. Influence of this physical change is investigated to evade future complications. This procedure is capable to cater any boundary condition by changing the axial wave number. But for simplicity, numerical results have been evaluated for clamped- simply supported rotating cylindrical shells. It has been observed from these results that shell frequency is bifurcated into two parts: one is related to the backward wave and other with forward wave. It is concluded that the value of backward frequency is some bit higher than that forward frequency. Influence of volume fraction laws have been examined on shell frequencies. Backward and forward frequency curves for a volume fraction law are upper than those related to two other volume fraction laws. The results generated furnish the evidence regarding applicability of present shell model and also verified by earlier published literature.

• 대한가정학회지
• /
• 제38권2호
• /
• pp.155-166
• /
• 2000

The purpose of this study was to provide the basic information about the elderly women's lower body type and anthropometric data by direct and indirect measurements, and to provide well fitting skirt patterns of each body types. Direct and indirect measurements were taken from 202 women, whose ages were between 60 and 79. Using statistical analysis, the lower body shapes of elderly women were classified into four following categories - \circled1 thin type, \circled2 typical type, \circled3 corpulence type and \circled4 corpulence but forward inclining type. Methods of modifying basic skirt patterns for each body types were suggested.

• 한국의상디자인학회지
• /
• 제15권1호
• /
• pp.75-89
• /
• 2013

The purpose of this study is to verify the mediating effect of store benevolence for impact on store loyalty of store environment and store personality. For this study, data were collected through questionnaires. The survey ran from March to May, 2011, the total of 330 respondents was used in analysis. The subjects consisted of adults living in the Daegu and Gyeongsangbuk-do region, and convenience sampling. For statistical analysis, SPSS 19.0 were used to verify the study model. The major results of the study show that store benevolence may play a linkage role of store environment, store personality on store loyalty. The store benevolence variable has the effect of partial mediation. The analysis of relationship between the variables of store environment (convenience, information service accessibility, accessibility, variation) and the store type show significant differences store environment (convenience, information service and the store type). The analysis of relationship between the variables of store personality(warm, fun, sophisticated, forward-looking) and the store type show significant differences store personality (warm, fun, sophisticated, forward-looking) and store type. The analysis of relationship between the variables of store environment(convenience, information service accessibility, accessibility, variation), and the demographic variables show significant differences in store environment (information service accessibility) regarding only age. The analysis of relationship between the variables of store personality(warm, fun, sophisticated, forward-looking) and the demographic variable show significant differences in store personality(warm) regarding only age (accessibility, accessibility, variation).