• 한국통신학회논문지
• /
• 제32권12A호
• /
• pp.1251-1259
• /
• 2007

A scheme for selecting the mode with the maximum system capacity is proposed for cooperative relaying. Three possible modes are presented based on decode-and-forward relaying, and the time required by each mode is evaluated. Based on these results, a method is then developed for selecting the optimal mode with the minimum time duration (or maximum channel capacity). Computer simulations confirm that the optimal mode outperforms the other modes.

• Journal of Power Electronics
• /
• 제14권1호
• /
• pp.105-114
• /
• 2014

The sliding mode control (SMC) strategy is applied to a permanent magnet synchronous machine vector control system in this study to improve system robustness amid parameter changes and disturbances. In view of the intrinsic chattering of SMC, a current sliding mode control method with a load sliding mode observer is proposed. In this method, a current sliding mode control law based on variable exponent reaching law is deduced to overcome the disadvantage of the regular exponent reaching law being incapable of approaching the origin. A load torque-sliding mode observer with an adaptive switching gain is introduced to observe load disturbance and increase the minimum switching gain with the increase in the range of load disturbance, which intensifies system chattering. The load disturbance observed value is then applied to the output side of the current sliding mode controller as feed-forward compensation. Simulation and experimental results show that the designed method enhances system robustness amid load disturbance and effectively alleviates system chattering.

• Journal of Electrical Engineering and information Science
• /
• 제3권1호
• /
• pp.36-44
• /
• 1998

In this paper, a robust adaptive sliding mode control algorithm for accurate trajectory tracking of robot manipulators is proposed, with unknown parameters being estimated on-line. The controller is designed based on a Lyapunov method, which consists of adaptive feed-forward compensation part and a discontinuous control part. It is shown that, in the presence of the uncertainty and the disturbances arising from the actuator or some other causes, the tracking errors is bound to converge to zero asymptotically. An illustrative example is given to demonstrate the results of the propose method.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 추계학술대회 논문집(Proceeding of the KOSME 2001 Autumn Annual Meeting)
• /
• pp.107-111
• /
• 2001

This paper presents a detailed analysis method of the universal input forward converter with LC input filter operating in discontinuous capacitor voltage mode(DCVM) for wind power generation. In this analysis, condition for DCVM operation and conversion ratio for rectified sinusoidal input are made clear. To verify the validity of the analysis, simulation is carried out for the universal input ranging from 90 $V_{rms} to 260 V_{rms}$

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 하계학술대회 논문집
• /
• pp.387-392
• /
• 1990

In this papers, SPICE which is widely used in analysis of general circuit and simulation in electric and electrical field is applied to DC-DC converter. Be selected Forward which is widely used as SMPS(Switched Mode Power Supply) amang DC-DC converter, and showed the aveformer, we know that the converter is operated in normal. Including the control circuit in converter, by controlling the duty ratio of switch, we know that the output voltages is staple from the transient state of convwrter. Also, comparing SPICE simulation with experiment, the validity of simulate is showed.

• 전자공학회논문지B
• /
• 제28B권5호
• /
• pp.411-420
• /
• 1991

In this paper, SPICE program which is widely used in analysis of general circuit on electronic and electrical field has been applied to DC-DC converter. We have selected Forward type which is widely used us SMPS(Switched Mode Power Supply) of various electronic equipments, and have confirmed the waveforms of circuit operation, transfer of energy and resetting in transformer. And the procedure which the output voltage of converter, including the control circuit, has been stabilized from the transient state to the steady state by controlling the duty ratio of switch is presented. We have compared SPICE simulation with experiment and have verified the validity of SPICE simulation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 추계학술대회 논문집
• /
• pp.59-63
• /
• 2004

In this paper, active forward converter with snubber circuit - composed of a tapped inductor, a snubber capacitor, two diodes - is proposed. By adding the snubber circuit, ZVS operation became possible even in a smaller magnetizing current conditions than the conventional converter. The operational principles and the equivalent mode analysis of the proposed converter is described and compared to conventional converter. We constructed the prototype active clamped forward converter with 300W output capacity and verified that efficiency of the proposed converter is higher than the conventional converter.

• Structural Engineering and Mechanics
• /
• 제26권4호
• /
• pp.377-392
• /
• 2007

A discrete sliding mode control (SMC) method based on hybrid model of neural network and nominal model is proposed to reduce the vibration of flexible structures, which is a robust active controller developed by using a sliding manifold approach. Since the thick boundary layer will reduce the virtue of SMC, the multilayer feed-forward neural network is adopted to model the uncertainty part. The neural network is trained by Levenberg-Marquardt backpropagation. The design objective of the sliding mode surface is based on the quadratic optimal cost function. In course of running, the input signal of SMC come from the hybrid model of the nominal model and the neural network. The simulation shows that the proposed control scheme is very effective for large uncertainty systems.

• 대한전자공학회논문지TC
• /
• 제48권7호
• /
• pp.28-34
• /
• 2011

영차 공진과 반파장 공진을 이용한 이중 모드 Inductor loaded 패치 안테나의 방사 특성을 연구하였다. 반파장 공진 모드에서 수평방향으로의 방사 이득을 최소화시키는 동시에 전방 방사 이득을 향상시켜 영차 공진 모드 방사 패턴과의 격리도를 향상시켰다. 이중 모드 inductor loaded 패치 안테나 기판의 유전상수가 작을수록, 안테나의 동작 주파수 대역이 높을수록 두 모드 간의 공진 주파수 간격이 증가함을 확인하였다.

• 한국군사과학기술학회지
• /
• 제14권6호
• /
• pp.1043-1048
• /
• 2011

In this paper, a newsynchronization technique applied to burst-mode communication is proposed. A synchronization technique is to estimate carrier frequency and phase offsets in a noisy channel environment. A fundamental problem for estimating the parameters(carrier phase and frequency offsets) in burst-mode transmission is that the ways of pursuing estimation accuracy and transmission efficiency are always trade-off. To solve this problem, a new carrier recovery technique is proposed to improve the transmission efficiency with reliable performance especially at low S/N. In the proposed technique, the synchronization parameters are first estimated based on a data-aided feed-forward estimation scheme. Then, a phase tracker using decision-directed DPLL estimates the phase offset for the data portion of the burst data. From simulation results, it shows fast synchronization with shorter preamble maintaining reasonable BER performance at low S/N.