• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.4
• /
• pp.5-18
• /
• 1995

공작기계는 금속가공 공업에 있어서 가장 중요한 생산수단의 요소이며, 공작기계의 발달없이 인류의 생활수준을 향상시킨다는 것은 생각도 할 수 없는 일이다. 선진국에서는 제조된 기계의 약 10%가 공작기계이며, 기계공업 노동력의 악 10%가 공작기계 산업에 종사하고 있다. 공작기계는 금속재료를 절삭(Cutting) 또는 연삭(Grinding)하여 원하는 모양, 치수 표면정도의 제품을 얻는 것이고 기계본체와 공구의 두부분으로 되어있어 동력에 의해 기계를 운전하고 절삭공구로써 가공을 한다. 국제 규격의 ISO에서는 '한 운동원에 의해서 작동하고 물리적, 화학적 또는 기타의 방법으로 성형해서 공작물을 생산하는, 수작업은 하지 않는 기계'라고 정의 하고 있으며 미국에서는 금속가공기계를 두가지로 나누어 정형형을 Forming machine이라 하고 절삭형을 Cutting machine 이라 분류하며 이 둘을 합하여 공작기계(Machine Tool)라고 부르고 있다.

• Journal of Environmental Health Sciences
• /
• v.22 no.2
• /
• pp.43-57
• /
• 1996

To characterize worker's exposure to glass fibers, to find the correlation between airborne total dust concentrations and fiber concentrations and to recommend an appropriate evaluation method for worker's exposure to fibrous dusts in glass wool industry, we carried out this study. Average respirable fiber levels at five factories were 0.013-0.056 f/cc, and fairly below the OSHA PEL, 1 f/cc. A factory showed the lowest airborne fiber level, 0.013 f/cc, which was different significantly from those of other factories of which average fiber concentration was 0.046 f/cc. The cutting and grinding operations of insulation products resulted in higher airborne fiber cocentrations than any other processes(p<0.05). To characterize airborne fiber dimension, fiber length and diamter were determined using phase contrast microscope. The geometric means of airborne fiber lengths were $42-105 \mu m$. One factory had airborne fibers whose length distribution(GM = $105 \mu m$) was different from those of other factories(GM = $42-50 \mu m$). The percentages of respirable fibers less thinner than 3 gm were 38.9-90.9% at four factories, and two factories of them had the higher percentages than others. The findings explain for variation of airborne fiber diameters between factories. On the other hand, between the processes were the difference of fiber-length distributions observed. The cutting and grinding operations showed shorter fiber-length distributions than the fiber forming one. However, fiber-diameter distributions or respirable fiber contents were similar in all processes. The airborne fiber concentrations and the dust concentrations had relatively weak correlation(r=0.25), thus number of fibers couldn't be expected reliably from dust amount. Fiber count is appropriate for assessing accurate exposures and health effects caused by fibrous dusts including glass fibers. Ministry of Labor have established occupational exposure limit to glass fibers as nuisiance dust, but should establish it on the basis of respirable fiber concentration to provide adequate protection for worker's health

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.12
• /
• pp.125-131
• /
• 2008

In the past, precision optical glass lenses were produced through multiple processes such as grinding and polishing, but mass production of aspheric lenses requiring high accuracy and having complex profile was rather difficult. In such a background, the high-precision optical GMP processes were developed with an eye to mass production of precision optical glass parts by molding press. Generally because the forming stage in a GMP process is operated at high temperature above $570^{\circ}C$, thermal stresses and deformations are generated in the aspheric glass lens mold that is used in GMP process. Thermal stresses and deformations have negative influences on the quality of a glass lens and mold, especially the height of the deformed glass lens will be different from the height of designed glass lens. To prevent the problems of a glass lens mold and the glass lens, it is very important that the thermal stresses and deformations of a glass lens mold at high forming temperature are considered at the glass molds design step. In this study as a fundamental study to develop the molds used in an aspheric glass lens fabrication, a heat transfer and a thermal stress analysis were carried out for the case of one cavity glass lens mold used in progressive GMP process. Finally using analysis results, it was predicted the height of thermally deformed guide ring and calculated the height of the guide ring to be modified, $64.5{\mu}m$. This result was referred to design the glass lens molds for GMP process in production field.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.698-698
• /
• 2014

According to the analysis of special medical examination and work environment monitoring data, the rate of C1 and D1 on noise hazard exceeded 90% among those of total hazardous factors. The rate of company exceeding noise exposure limit was also more than 90%. The analysis result shows that main ages diagnosed with C1 and D1 was age of 50s. The majority scale company having workers diagnosed with C1 and D1 was the companies employing 5~49 workers. Types of industries which have a large number of companies exceeding noise exposure limit were automobile and trailer manufacturing, metal processing industry and primary metal manufacturing. A large number of work processes exceeding noise exposure limit were forming and processing work, cutting and bending work and grinding. To reduce the number of company exceeding noise exposure limit, the reduction counterplan should be focused on the type of industry and the work process which exceeded noise exposure limit frequently. However, the reduction counterplan is preemptively necessary to the type of industry and the work process which exceeded noise exposure limit consecutively if the purpose of reduction counterplan is not to merely reduce the number of company exceeding noise exposure limit but to abate workers' suffering from noise.

• Korean Journal of Materials Research
• /
• v.29 no.7
• /
• pp.425-431
• /
• 2019

Generally, ceramic tiles for building construction are manufactured by dry forming process using granular powders prepared by spray drying process after mixing and grinding of mineral raw materials. In recent years, as the demand for large ceramic tiles with natural texture has increased, the development of granule powders with high packing ratio and excellent flowability has become more important. In this study, ceramic tile granule powders are coated with hydrophobically treated silica nanoparticles. The effects of hydrophobic silica coating on the flowability of granule powders and the strength of the green body are investigated in detail. Silica nanoparticles are hydrophobically treated with GPTMS(3-glycidoxypropyl trimethoxy silane), which is an epoxy-based silane coupling agent. As the coating concentration increases, the angle of repose and the compressibility decrease. The tap density and flowability index increase after silica coating treatment. These results indicate that hydrophobic treatment can improve the flowability of the granular powder, and prevent cracking of green body at high pressure molding.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.1
• /
• pp.5-12
• /
• 2015

According to the analysis of special medical examination and work environment monitoring data, the rate of C1 and D1 on noise hazard exceeded 90 % among those of total hazardous factors. The rate of company exceeding noise exposure limit was also more than 90 %. The analysis result shows that main ages diagnosed with C1 and D1 was age of 50s. The majority scale company having workers diagnosed with C1 and D1 was the companies employing 5~49 workers. Types of industries which have a large number of companies exceeding noise exposure limit were automobile and trailer manufacturing, metal processing industry and primary metal manufacturing. A large number of work processes exceeding noise exposure limit were forming and processing work, cutting and bending work and grinding. To reduce the number of company exceeding noise exposure limit, the reduction counterplan should be focused on the type of industry and the work process which exceeded noise exposure limit frequently. However, the reduction counterplan is preemptively necessary to the type of industry and the work process which exceeded noise exposure limit consecutively if the purpose of reduction counterplan is not to merely reduce the number of company exceeding noise exposure limit but to abate workers' suffering from noise.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.3
• /
• pp.263-269
• /
• 2016

Large quantities of by-products—such as fish frame, head, skin and viscera—are generated during seafood processing, and these by-products are not utilized extensively. Therefore, sea rainbow trout Oncorhynchus mykiss (SRT) frame muscle (FM) jerky was prepared by grinding SRT-FM, followed by mixing with seasoning, forming and drying. The nutritional and microbiological characteristics of the SRT-FM jerky were then investigated. The proximate composition of the SRT-FM jerky was 19.1% moisture, 38.7% crude protein, 7.9% crude lipid and 4.4% ash. The viable bacterium count of the SRT-FM jerky was 3.9 log CFU/g, and Escherichia coli and Staphylococcus aureus were not detected. The total amino acid content of SRT-FM jerky was 37.3 g/100 g, and the major amino acids were aspartic acid, glutamic acid, leucine and lysine. Based on the recommended daily intake of fish jerky (100 g), the most abundant mineral was potassium. The fatty acid composition of the SRT-FM jerky was 26.2% saturated acid, 34.5% monoenoic acid and 39.3% polyenoic acid, and the major fatty acids were 16:0, 18:1n-9, 18:2n-6, 20:5n-3 and 22:6n-3. These results suggest that SRT-FM jerky has high nutritional value.

• Journal of Fashion Business
• /
• v.16 no.6
• /
• pp.21-35
• /
• 2012

In consideration of the injuries and deaths occurring at manufacturing sites due to the use of inappropriate work clothes or safety devices, this study aims to categorize manufacturing work processes to develop functional work clothes for heavy industries including the automobile, machine and shipbuilding industries in South Korea. Defining the features of the work environments and work postures of these industries provided for a categorization of the work processes which would enable the development of suitable work clothes for each work process' category. The results of the study based on a questionnaire survey are as follows: Work process category 1, including steel panel pressing and auto body assembly, final inspection (in automobile) and inspection (in machine), requires work clothes with upper body and arm mobility and performance to protect from the toxic fume factor. Work process category 2, consisting of welding (in automobile), cutting-and-forming (in machine) and attachment-and-construction (in shipbuilding), requires clothing elasticity, durability and heat and fire resistance. Work process category 3 comprising welding and grinding in the machine and shipbuilding industries, requires work clothes' tear resistance and elasticity, particularly for lateral bending mobility, and work clothes' sleeves' and pants' hemlines with sealed designs to defend against iron filing penetration, as well as incombustible and heat-resistant material performance. Finally, work process category 4, including painting in machine and shipbuilding, requires work clothes with waterproofing, air permeability, thermal performance, elasticity, durability and abrasion resistance.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.5
• /
• pp.20-28
• /
• 2014

The high velocity oxygen fuel spraying (HVOF) is a kind of surface modification process technology to form the sprayed coating layer after spraying the powder to molten or semi-molten state by the ultra-high speed at the high-temperature heat source and conflicting with a substrate. It is desirable to melt completely the thermal spray powder in order to produce the coating layer with an optimal adhesion, however, because a semi-molten powder in a spray process has the low efficiency and become a factor that degrades the mechanical property by the inducement of pore-forming within the coating layer. To improve the wear resistance, corrosion resistance and heat resistance, in this study, the plungers of high-speed and ultra-high pressure reciprocating hydraulic pumps for oil and water used in ironwork are produced with $420J_2$ and the coating layers of plungers are formed by the powders of WC-Co-Cr and WC-Cr-Ni including the high hardness WC. The surface of these plungers is modified by the super-mirror face grinding machine using variable air pressure developed in this laboratory, and then the characteristics of cross-sectional microstructure, and surface roughness and hardness values between no operation and 100 days-operation are examined and made a comparison. The fine tops and bottoms on surface roughness curve of oil-hydraulic pump plunger sprayed by WC-Cr-Ni are molded more and higher than those of water-hydraulic pump sprayed by WC-Co-Cr because the plunger diameter of oil-hydraulic pump is 0.4 times smaller than that of water-hydraulic pump and the pressure of oil-hydraulic pump exerted on the plunger is operated with the 70 bars higher than that of water-hydraulic pump. As a result, it is found that the values of centerline average surface roughness and maximum height for oil-hydraulic pump plunger are bigger than those of water-hydraulic pump plunger.

• Journal of Preventive Medicine and Public Health
• /
• v.14 no.1
• /
• pp.97-110
• /
• 1981

This study was conducted in order to investigate the status of harmful working environ ment on twelve rubber and ten chemical products manufacturing industries in Busan area over a period of five months from lune 1 to October 31, 1980. The summarized results were as follows: 1. The highest and lowest mean values of harmful environmental elements in workroom of rubber products manufacturing industries were noted in twisting (98.7dB) and coating department (77.3dB) to noise, molding ($6.43mg/m^3$) and forming ($1.33mg/m^3$) to dust, bonding (toluene 463.7ppm, xylene 457.8ppm and benzene 111.8ppm, respectively) and splicing (toluene 90.0ppm, xylene 83.3ppm and benzene 6.7ppm, respectively) to organic solvents, respectively. Also in chemical products manufacturing, they were noted in grinding (95.1dB) and shining department (76.8dB) to noise, packing ($4.30mg/m^3$) and staining ($3.20mg/m^3$) to dust, shining (393.3ppm and 375.0ppm, respectively) and varnishing(125.5ppm and 121.7ppm, respectively) to toluene and xylene, and scattering (51.8ppm) and mixing (23.9ppm) to benzene, respectively. 2. The mean values of harmful elements in workroom of rubber products manufacturing were 86.3dB to noise, $4.16mg/m^3$ to dust, 258.2ppm to toluene, 230.3ppm to xylene, and 5 4.0ppm to benzene, respectively. Also in chemical products manufacturing, they were 85.2dB to noise, $3.69mg/m^3$ to dust, 227.9ppm to toluene, 213.2ppm to xylene, and 36.3ppm to benzene, respectively. 3. Number of workers exposed to harmful working environment, over TLV, of a total 10,195 workers in rubber products manufacturing were 1,002(9.8%) to noise, 212 (2.1%) to dust, 1,581(15.5%) to toluene, 1,509(14,8%) to xylene, and 1,524(15.0%) to benzene, respectively. Number of workers exposed to harmful working environment, over TLV, of a 1,913 workers in chemical products manufacturing were 112(5.9%) to noise, 132(6.9%) to each organic solvent, respectively. 4. The values of noise and dust of rubber and chemical products manufacturing in 1980 were lower then those in 1977, but the value of organic solvent in 1980 was similar with that in 1977.