• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.2
• /
• pp.169-176
• /
• 2017

Dental implants are required to have biomechanical functions and biostability in order to perform authoring, pronunciation, and aesthetic functions in the oral cavity. In terms of biostability, pure titanium for medical have good biostability and no rejection in the alveolar bone. with appropriate strength in terms of strength as well as biocompatibility. In recent years, various surgical methods and devices have been developed to improve the convenience and safety of the procedure. However, as the number of procedures increases, the screw loosening of the abutment screw connecting the artificial root and the abutment There are many reports of artificial root and abutment fracture. Fig. 1 is an example of a case where the upper part of the abutment screw is arbitrarily modified to remove the abutment by the abutment fracture due to the loosening of the abutment screw. The fundamental cause of abduction of the abutment screw is caused by the slight movement due to the lowering of the retention force of the abutment screw. It is necessary to minimize loosening of the abutment screw to avoid problems such as fracture during the period of using the implant. The purpose of this study is to investigate the structure of the abutment screw to prevent the loosening of the abutment screw by forming 0.5mm slot.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.4
• /
• pp.416-422
• /
• 2019

This paper proposes a GPU-based modeling and rendering of 3D clouds using procedural functions. The formation of clouds is based on modified noise function made with fbm(Fractional Brownian Motion). Those noise values turn into densities of droplets of liquid water, which is a critical parameter for forming the three different types of clouds. At the rendering stage, the algorithm applies the ray marching technique to decide the colors of cloud using density values obtained from the noise function. In this process, all lighting attenuation and scattering are calculated by physically based manner. Once we have the clouds, they are blended on the sky, which is also rendered physically. We also make the clouds moving in the sky by the wind force. All algorithms are implemented and tested on GPU using GLSL.

• Design & Manufacturing
• /
• v.16 no.1
• /
• pp.27-35
• /
• 2022

Thermoforming is a plastic manufacturing process that applies a force to stretch a film of heated thermoplastic material over an engineered mold to create a 3-dimensional shape. After forming, the shaped part can then be trimmed and finished to specification to meet an end-user's requirements. The process and thermoplastic materials are extremely versatile and can be utilized to manufacture parts for a very wide range of applications. In this study, based on K-BKZ nonlinear viscoelastic model, thermoforming process analysis was performed for an interior room-lamp. The predicted thickness was minimum at the corner of a molded film, and maximum at the center of the bottom. By using the Taguchi method of design of experiments, the effects of process conditions on residual stresses were investigated. The dominant factors were the liner thickness and the film heating time. As the thickness of the liner increased, the residual stress decreased. And it was found that the residual stress decreased significantly when the film heating temperature was higher than the glass transition temperature. A thermoforming mold and a trimming mold were manufactured, and the spring back was investigated through experiments. The dominant factors were film heating time, liner thickness, and lower mold temperature. As the film heating time and liner thickness increased, the spring back decreased. In addition, it was found that the spring back decreased as the lower mold temperature increased.

• CELLMED
• /
• v.13 no.10
• /
• pp.12.1-12.4
• /
• 2023

The purpose of this study is to suggest that compassion is used as a mechanism to improve immunity by activating people's parasympathetic nerves. Compassion is pity and heartbreak for the misfortune of others. The instinctive emotion of compassion is the basis for humans to achieve and develop society. This is also linked to the laws of nature and the factors of evolution that Kropotkin, famous for his "mutual assistance (mutualism)" that all things help each other. Compassion is an individual's instinctive emotion and at the same time a driving force for forming and developing society. If the Hopeful World (希望世上) performs Korean traditional music healing at a nursing home, first, it will have a positive healing effect on the elderly in the nursing home, who are the audience. Second, positive healing effects can also be expected from performers. The stronger the compassion, the greater the healing effect. Third, people who watch the performance also enjoy the healing effect. This seems to have brought about a synergistic effect by combining the feelings felt while looking at the excellent behavior felt by seeing the poor person. It seems that this effect can be named the compassion effect that developed the Mother Teresa effect. The Mother Teresa effect refers to a significant improvement in the body's immune function just by volunteering or seeing good things. By expanding this Mother Teresa effect, it can be inferred that a pitying heart, helping behavior, and being with good behavior will all help improve the human immune system. This can also be called the compassion effect. Therefore, we think having compassion activates the parasympathetic nerves, improving your mood, and increasing your immunity.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.667-669
• /
• 2021

Recently, RFID/USN technology has been applied in various fields such as logistics, environment, education, home network, disaster prevention, military, and medical care, but despite the remarkable development of RFID/USN technology, it is difficult to apply it to marine industry due to the characteristics of poor marine environment. Therefore, satellites are mainly used in the marine sector, and existing communication networks are used in the coast, so measures for forming a shelf-only short-range network in the ocean are being considered. In this paper, we consider the use of drones as mobile base stations of USN as a base station role using USN in existing PS-LTE and LTE networks.Since autonomous navigation vessels are aiming for the intelligent system, the number of crew and labor force should be reduced and the function of autonomous network formation in the form of more stable and intelligent ICT convergence technology should be strengthened.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.3
• /
• pp.155-165
• /
• 2024

A hybrid thin film was prepared by doping reduced graphene oxide (rGO) into a sol-gel solution mixed with aluminum, titanium, and strontium using a brush coating method. The annealing temperature was carried out at 160, 260, and 360℃, and the difference in oxidation reaction was observed. The sol-gel solution created during the membrane manufacturing process generates a contractile force due to the shear stress of the brush bristles, forming a microgroove structure. This structure was confirmed through scanning electron microscopy analysis, and the presence of rGO was clearly revealed. As the annealing temperature increases, the oxidation and reduction reactions on the thin film surface become more active, so the intensity of the surface mixture increases. Moreover, the electro-optical properties were stabilized and improved by increasing the intensity of the mixtures. Likewise, the voltage-capacitance values are also significantly improved. Lastly, the transmittance measurement showed that it was suitable for liquid crystal display application.

• The korean journal of orthodontics
• /
• v.31 no.1 s.84
• /
• pp.85-95
• /
• 2001

The purpose of this study was to evaluate the material for fixed type retainer, allowing physiologic tooth movement. and proper remodeling or periodontal tissue during retention period. The Present study was Performed to observe the histologic changes of periodontal tissue after application of different types of fixed type retainer after orthodontic tooth movement in young adult dogs. For this study, 4 young adult dogs were used as a experimental animal and experimental group was divided into three groups : experimental group 1 contained right side maxillayy third incisors and canines, experimental group 2 contained contralateral teeth of same animals, and control group contained mandibular premolars. And each dogs were applied the 4 different types of fixed type retainer to experimental group 1. The experimental teeth were ligated on the Sentalloy closed coil $spring^{\circledR}$(Tomy Co., Japan) from maxillary third incisors and canines and applied orthodontic force at initial 200gm-forced during 1 week. All the experimental animals were sacrificed on the 3rd week after the orthodontic teeth movement and then the specimens were taken, fixed in formalin, embeded in parafin, sectioned $6-8{\mu}m$ in thickness and stained with Hematoxylin-Eosin staining, and Masson's trichrome staining method. Examined under the light microscopy The following results were observed. 1. There were observed that decreased infiltration of giant tells in pressure side and increased the new bone forming in tension side on the specimen of 6-stranded 0.0195' $Respond^{\circledR}$(G&H Co., U.S.A.) group. Periodontal ligament fibers were much compressed or elongated in 3-stranded 0.018', 0.020' $Dentaflex^{\circledR}$(Dentarum Co., Germany), and Superbond $C&B^{\circledR}$(Sun Medical Co., Japan) groups. 2. In experimental group 1, necrotic bone inside the alveolar bone of pressure side, forming of the sharpey's fiber in osteoid tissue, and remodeling of the periodontal ligament were observed in all animals. 3. In experimental group 2, it was observed that the amount of bone resorption was equal or decreased in pressure side, and increased new bone forming and significantly decreased infiltration of giant cell than the experimental group 1. By this results, it considered that 6-stranded $Respond^{\circledR}$(G&H Co., U.S.A.) wire was the most useful material allowing early periodontal tissue remodeling.

• Journal of Wetlands Research
• /
• v.22 no.3
• /
• pp.194-199
• /
• 2020

Unlike in the past, the world is facing water shortages due to climate change and difficulties in simultaneously managing the risks of flooding. The Four Major Rivers project was carried out with the aim of realizing a powerful nation of water by managing water resources and fostering the water industry, and the construction period was relatively short compared to the unprecedented scale. Therefore, the prediction and analysis of how the river environment changes after the Four Major Rivers Project is insufficient. Currently, part of the construction section of the Four Major Rivers Project is caused by repeated erosion and sedimentation due to the effects of sandification caused by large dredging and flood-time reservoirs, and the head erosion of the tributaries occurs. In order to solve these problems, the riverbed maintenance work was installed, but it resulted in erosion of both sides of the river and the development of new approaches and techniques to keep the river bed stable, such as erosion and excessive sedimentation, is required. The water agent plays a role of securing a certain depth of water for the main stream by concentrating the flow so much in the center and preventing levee erosion by controlling the flow direction and flow velocity. In addition, Groyne products provide various ecological environments by forming a natural form of riverbeds by inducing local erosion and deposition in addition to the protection functions of the river bank and embankment. Therefore, after reviewing the method of determining the shape of the Groyne structure currently in use by utilizing the mobile limit flow rate and marginal reflux force, a new Critical Movement Velocity(${\bar{U}}_d$) and a new resistance coefficient formula considering the mathematical factors applicable to the actual domestic stream were developed and the measures applicable to Groyne installation were proposed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.440-447
• /
• 2020

Masonry structures are used as bearing walls in small buildings, but they are generally considered non-bearing walls. They are used as partition walls that divide the interior spaces of the frame structures of buildings. In addition, wetting techniques that use mortar as an adhesive between blocks or bricks in construction are vulnerable to climatic conditions, especially cracks in mortar, which can cause conduction collapse of the walls in seismic loading. The purpose of this research was to propose a dry concrete block construction method that complements the weak axial shear stiffness and improves the weakness of the wet construction method as well as to investigate its structural behavior. In this study, the material properties of concrete blocks were examined, and the seismic performance of the proposed dry assembly structure was verified by structural behavior tests on horizontal cyclic loads. First, in these study results, concrete blocks can be applied to the dry block construction method instead of wet construction methods because they secure more than C-type blocks in KS regulations. Second, the structural performance of the wall against a horizontal cyclic load indicates that the resisting force of the assembly block wall is increased by increasing the horizontal length of the wall, forming several diagonal cracks. Finally, the proposed dry block wall structure requires a seismic performance assessment considering that the ratio of the shape of the wall by height and length is considered a major influence variable on the structural behavior under a horizontal load.

• Journal of the Korean Society of Costume
• /
• v.30
• /
• pp.85-99
• /
• 1996

This study has been made to examine the symbolic meaning of our traditional costume colours based on the theory of yin-yang Wu-hsing the interaction of yin and yang with the rotation of the five agents wood firt earth metal and waters. Presenting the spirt and the life of our race the costume culture has been keep-ing its own systematic symbol. Being sensible the colour has to be under-stood as the colour sense therefore the cos-tume colour has begun to have the symbolic meaning with the feeling or the mental value. According to the theory of yin-yang wu-hsing the costume colour has presented our racial sprit way of thinking and way of life for a long time and it has become the tra-ditional culture at last. Based on the doctrine of cosmic harmony through the motion of yin and yang or the passive and active elements are their five agents form the material force of everything. The order of nature has its counterpart in five symbolic costume colours wood-blue ; fire-red: earth-yellow; metal-white: water-black. The five colours are called the primary colours. which produce the next compound colours. Accepted in the social system as well as the social stats the costume colour has set up systematically. The theory of Yin-yang Wu-hsing has given the five colours the symbolic meanings and its mainstream has been the function of Sangsaeng and Sangeuk which are genera-ted by the power of virture. The former is mu-tually beneficial while the latter destructive. The colour as a costume colour has been made distinction between the colour of the up-per classes and the colour of the middle and lower classes and the specific colour has presented the symbolic meanings. The yeollow the red and the purple have been regarded as the colour of king queen and upper classes Being the colour recognition the costume colour has been established by the society and the race generally Implied the spiritual elements the colour recognition could select the lucky colour in accordance with one's des-tiny. Besides the colour recognition has begun to appear as the racial costumes to protect the society and to pray for good fortune. According to the theory of Yin-yang Wu-hsing the costume colour has been forming through our long history and has become our costume culture. Therefore the colour of the costume has signified not only the colour sense but also the important symbolic meanings.