• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1804-1809
• /
• 2003

The purpose of this study is to clarify the bulk/sheet forming characteristics of bulk amorphous alloys in the supercooled liquid state. The temperature dependences of Newtonian viscosities of amorphous materials are obtained based on the previous experimental works. Finite element analyses for compression forming and sheet deep drawing of amorphous materials are performed. Effects of friction coefficients and temperature are examined and formability of amorphous material is explained in detail.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.4
• /
• pp.28-33
• /
• 2009

Yoke is a part of rotor in unmanned helicopter. It was transferred power of engine to the rotor. It has been usually produced by machining and used wastefully material. And it has been considered to improve its proof stress against repeated loading of the products. Therefore we studied Forging process for satisfaction of these ability and process design for yoke forming has been studied by using FE analysis. Die design and forming analysis have been performed according to the conditions such as billet volume, flash control, cavity filling, and the distribution of damage in the products. In the comparison between die forging processes, side punch effects has been investigated by considering billet dimensions.

• Transactions of Materials Processing
• /
• v.4 no.4
• /
• pp.345-352
• /
• 1995

Warm deep drawing for optimum forming conditions to give the maximum drawing depth is investigated and compared with the results from experiments performed at room temperature. Experiments which draw square cups of STS 304 stainless steel sheet under the constant lubrication condition of teflon film are made both in a crank and hydraulic press for two kinds of specimens. The maximum drawing depth at warm forming condition reaches 1.4 times the drawing depth at room temperature in a crank press, whereas 1.6 times in a hydraulic press, and also more uniform distribution of thickness in case of warm deep drawn cup is observed. The effects of other factors on formability, such as forming temperature, speed of press and cooling of punch are examined and discussed.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.88.1-88.1
• /
• 2012

We utilize Sloan Digital Sky Survey DR7 spectroscopic data of ~340 star forming galaxies in the Virgo cluster to investigate their chemical properties depending on the environments. The chemical evolution of galaxies is linked to their star formation histories (SFHs), as well as to the gas interchange in different environments. In this sense, galaxy metallicity could be an observable parameter providing information on the impact of the environment on the galaxy SFH and/or the galaxy gas content. Thus, we derived gaseous metallicity (e.g., oxygen abundance) of star forming galaxies located in different regions of the Virgo cluster using well-known empirical calibrations. We also estimated their star formation rate (SFR) using H alpha luminosity. Inorder to investigate the chemical properties of these galaxies, we examined relations between various parameters: metallicity vs. luminosity, SFR vs. luminosity, and metallicity vs. cluster-centric radius. From our results, we discuss environmental effects of cluster to the chemical properties of star forming galaxies.

• Toxicological Research
• /
• v.6 no.1
• /
• pp.13-19
• /
• 1990

The effects of panaxytrion as known to be a cytotoxic substance isolated from Panax ginseng on the immune responses were examined. The i.p. administration of panaxytriol to normal mice for 6 consecutive days as doses of 5, 10 and 20 mg/kg suppressed the increase of body weight dose-dependently but did not affect the weight ratio of immunoorgans to body weight, No significant changes were observed in the humoral immune responses as measured by Arthus reaction and plaque forming cells and in the cellular immune response as measured by delayed hypersensitivity as well as phagocytic activity of reticuloendotherial system. These results suggested that panaxytriol, a cytotoxic substance to cancer cells, has no detrimental effects on the immune function in normal mice.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.05a
• /
• pp.49-53
• /
• 2001

Recently hydroforming process became a process which is increasingly applied in the automotive industry. As the hydroforming process is a new technology, there is no abundant data to assist manufacturing the products. To investigate the effects of process parameters on the tube hydroforming process, simple bulging, circular bulging and Tee-fitting tests are performed. The optimal leading path to escape the failure modes(bursting, wrinkling) is determined and the effects of the process parameters, the internal pressure and axial feeding on the product quality, such as thickness distribution, forming height and branch dome shape are investigated.

• YAKHAK HOEJI
• /
• v.46 no.2
• /
• pp.120-123
• /
• 2002

In order to investigate the effects of chitosan on the normal and cyclophosphamide (CY)-suppressed primary humoral immune response in mice, chitosan was orally administered alone (single dose of 62.5, 250 mg/kg) or with CY (20 mg/kg, i.p.) to female ICR mice on the 2nd day before or after immunization with SRBC-antigen. When chitosan alone was administered before antigenic challenge, splenic IgM plaque forming cells (PFC) and splenic cellularity were slightly increased and serum IgM was not changed when compared with control group. However, chitosan significantly enhanced PFC, serum IgM and splenic cellularity when administered after antigenic challenge. The PFC numbers, serum IgM and splenic cellularity were significantly decreased by the treatment of CY, whereas those values were slightly increased by the concomitant treament of CY and chitosan when compared with CY alone-administration. These results indicate that chitosan is able to increase normal humoral immunity (HI) and to slightly inhibit the suppressive effects of CY on HI.

• Journal of Korea Foundry Society
• /
• v.40 no.2
• /
• pp.34-42
• /
• 2020

The effects of the initial balancing pressure, filling pressure and maximum build-up pressure on the casting characteristics of the thick-wall thickness casting during the counter-pressure casting process were investigated. Water model experiment and a computer simulation were carried out to evaluate the characteristics during the filling and solidification stages in counter-pressure casting (CPC); as a reference, the low-pressure casting (LPC) process was used. The average dendrite cell size decreased with an increase in the solidification rate and maximum build-up pressure. A turbulent flow occurred during the filling stage of the LPC process, resulting in the formation of inner gas, while a lamellar flow pattern dominated during the CPC process and was more evident with an increase in the initial balancing pressure, improving the mechanical properties of the castings.

• Transactions of Materials Processing
• /
• v.23 no.4
• /
• pp.199-205
• /
• 2014

The current study examines the effect of the analytical parameter values on the theoretical forming limit diagram (FLD) based on the Marciniak-Kuczynski model (M-K model). Tensile tests were performed to obtain stress-strain curves and determine the anisotropic properties in the rolling, transverse and diagonal direction of SPCC sheet materials. The experimental forming limit curve for SPCC sheet material was obtained by limiting dome stretching tests. To predict the theoretical FLD based on the M-K model, the Hosford 79 yield function was employed. The effects of three analytical parameters - the exponent of the yield function, the initial imperfection parameter and the fracture criterion parameter - on the M-K model, were examined and the results of the theoretical FLD were compared to the experimentally measured FLD. It was found that the various analytical parameters should be carefully considered to reasonably predict the theoretical FLD. The comparison of the acceptable forming limit area between the theoretical and experimental FLD is used to compare the two diagrams.

• Transactions of Materials Processing
• /
• v.21 no.5
• /
• pp.298-304
• /
• 2012

The shielded slot plates for a molten carbonate fuel cell(MCFC) have a sheared corrugated trapezoidal pattern. In the FEM simulations for the production of the shielded slot plate, the user material subroutine VUMAT in the commercial FEM software ABAQUS was used to implement a ductile fracture criterion. The critical damage value for the ductile fracture criterion was determined by comparing the experimental results of the shearing process with the simulation results. Using the ductile fracture criterion, the FEM simulation of the three-dimensional forming process of the shielded slot plate was conducted. The effects of the shearing process on the forming process were examined through FEM simulation and experiments. The forming simulation of nine unit cells was conducted. Using the simulation results of the forming process, the deformed shape after springback was calculated. The experimental result shows good agreement with the simulation.