• Composites Research
• /
• v.29 no.5
• /
• pp.236-242
• /
• 2016

In this work, tensile and in-plane shear tests for thermoplastic glass fiber/polypropylene composites were performed at a thermo-forming temperature and their properties were characterized and mathematically expressed by using the non-orthogonal constitutive model. As for the thermo-forming test, half-dome experiments were carried out by varying the usage of a releasing agent and the weight of holders. As results, the optimum final shape having well-aligned symmetry and no wrinkle formation was obtained when the releasing agent was used, and it was found that the careful control of a holding force is crucial to manufacture the healthy product. Furthermore, FEM simulations based on the non-orthogonal model showed similar final shapes and tendency of wrinkle formation with experimental results, and confirmed that wrinkles increase with less holding force and higher punch force is required under high frictional condition.

• Journal of the Korean Society of Safety
• /
• v.24 no.5
• /
• pp.21-27
• /
• 2009

Effective way of cooking oil fire extinguishment is using water mist system which has cooling and smothering effects. Low pressure water mist system has advantage because it is compatible with existing sprinkler systems. To increase the effectiveness of low pressure water mist system, additives can be used which increase the momentum of water particle and the chemical effect. In this experiment, aqueous film forming form(AFFF) agent is used as additive and the effect of additive concentration and water pressure are experimented. For the extinguishment of cooking oil fire such as soybean and olive oils, AFFF agent is effective and can decrease the fire extinguishing time and water consumption.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.11a
• /
• pp.69-72
• /
• 2009

This research is focused on the applying of the foaming agent which can make the independent pore in the concrete structure in order to make a lightweight concrete structure. This lightweight foamed concrete can satisfy both the required strength and the mechanical properties as structural members. In addition, anti freezing-thawing properties also required. As a result of the unit volume-weight measurement, when the foaming agent mixed at 0.5% to 1%, the lightweight foamed concrete can be applied for the structural member. Also the density and compressive strength measurement results reveals that it will be suitable as structural member with 21MPa strength, when the density is betweenity8 to 1.9 and foaming agent quantities are 0.5% to 1%. Finally the result of freezing-thawing experiment, the effect freezing-thawing damage reduced according to adding foaming agent because those foaming agent make micro-pores in the structure which are not seen in the ordinary concrete structure.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.47 no.2
• /
• pp.120-127
• /
• 2020

The aim of this study was to evaluate the antimicrobial effect of photodynamic therapy (PDT) using plaque disclosing agent, 10 - 20 mM erythrosine, as a photosensitizer. Multispecies cariogenic biofilms containing Streptococcus mutans, Lactobacillus casei and Candida albicans were formed on hydroxyapatite disc. 20 μM, 10 mM and 20 mM erythrosine were applied as a photosensitizer for 3 minutes, and then light-emitting diode (LED) irradiated for 24 seconds. Colony-forming unit (CFU) were measured and biofilms were observed using confocal laser scanning microscopy (CLSM). CFU were significantly decreased in the PDT groups using 10 - 20 mM erythrosine (10 mM, 20mM) and the results were also confirmed by CLSM. This study confirms the high antimicrobial effect of photodynamic therapy using plaque disclosing agent as a photosensitizer.

• Journal of Food Hygiene and Safety
• /
• v.2 no.4
• /
• pp.191-196
• /
• 1987

Erythrosine used as a colouring agent in drugs, cosmetics and foods in Korea, was examined for its effects on murine immune system and methemoglobin formation. As immunotoxicologic assay parameters, we adopted circulating leukocytes and immunoorgan weights for pathotoxicology, IgM plaque forming cells and arthus reaction for humoral immunity, delayed hypersensitivity reaction of cell mediated immunity and carbon clearacnce for macrophage function. Erythrosine's effects were observed as follows; 1. Ery throsine showed no significant effects on circulating leulocyte counts and relative immunoorgan weight. 2. Erythrosine diminished IgM plaque forming cells. 3. Erythrosine decreased arthus reaction, in the dose dependent manner. 4. Erythrosine had no significant effect on delayed hypersensitivity. 5. Phagocytic and corrected phagocytic index were not affected. 6. Methemoglobin content was similar in the test and control groups.

• KSBB Journal
• /
• v.28 no.3
• /
• pp.202-207
• /
• 2013

In this study, saponin content of extract from modified preconditioning process was investigated in Saponaria officinalis L. for cosmetic natural surfactant. Saponin content in steamed leaves from S. officinalis L. was about three times more than that in dried leaves (tea saponin and quillaja saponin). And saponin extracts from steamed leaves was excellently shown in both forming force and forming stability. In emulsion activity, saponin extracts from steamed leaves had a similar level to quillaja saponin and tea saponin. Saponin extracts from steamed leaves in S. officinalis L. showed nontoxic effect below in $1,000{\mu}g/mL$ of concentration and dose-dependent inhibition of NO production. From the experiment, the extracts of S. officinalis L. showed good cosmetic agent.

• Journal of the Korean institute of surface engineering
• /
• v.35 no.5
• /
• pp.279-288
• /
• 2002

Zinc phosphating for cold forming of steel was studied with emphasis on decreasing phosphating temperature. To lower phosphating temperature, some techniques, such as adding Cu ion into bath, using activator in the form of pre-dip, and aeration in bath, instead of using conventional accelerator, namely oxidizing agent, have been tried. It was revealed that phosphating, leading to coatings of Improved uniformity and fine crystal size, can be carried out using above techniques at lower temperature ($55^{\circ}C$) compared to conventional phosphating temperature ($80 ~ 90^{\circ}C$ ). Under present condition, it was seen that optimum concentrations of Cu ion in phosphating bath and activator in pre-dip are 0.015% (w/w) and 2.0 g/1, respectively. The coating weight was within the range of 15 ~ 20 g/$\m^2$. When lubricant was applied into phosphating coatings, the amount of lubricating component (total soap) was found to be 6 ~ 10 g/$\m^2$ and the lubricated panel revealed excellent lubricating properties.

• The Korean Journal of Food And Nutrition
• /
• v.1 no.2
• /
• pp.95-101
• /
• 1988

In order to produce lactic acid and calcium lactate very useful for foods and medical supplies, lactic acid fermentation was studied by Lactobacillus sporogenes, a spore forming lactic acid bacterium. When this bacterium was cultured aerobically in the spore forming medium, the spore forming rate was 96.0% as total cell number 20$\times$108/ml, spore number 19.2$\times$108/ml. One minute agitating every 1 hour in the flask culture, or agitation of 100rpm in the fermenter was most efficient to continue to ferment at 45$^{\circ}C$ for 4days in the fermentation medium containing 10% glucose as carbohydrate and CaCO3 as a neutralizing agent. This homofermentative lactic acid bacterium showed fermentation yield of 99.3% and more than 98.2% of the yield was L(+)-lactic acid.

• Journal of the Korean institute of surface engineering
• /
• v.36 no.1
• /
• pp.59-68
• /
• 2003

Zinc phosphating for cold forming of steel was studied with emphasis on decreasing phosphating temperature. To lower phosphating temperature, some techniques, such as adding Cu ion into bath, using activator in the form of pre-dip, and aeration in bath, instead of using conventional accelerator, namely oxidizing agent, have been tried. It was revealed that phosphating, leading to coatings of improved uniformity and fine crystal size, can be carried out using above techniques at lower temperature (55$^{\circ}C$) compared to conventional phosphating temperature ($80∼90^{\circ}C$). Under present condition, it was seen that optimum concentrations of Cu ion in phosphating bath and activator in pre-dip are 0.015 % (w/w) and 2.0 g/1, respectively. The coating weight was within the range of $\15∼20 g/m^2$. When lubricant was applied into phosphating coatings, the amount of lubricating component (total soap) was found to be$ 6∼10 g/\m^2$ and the lubricated panel revealed excellent lubricating properties.

• Journal of the Korean Ceramic Society
• /
• v.53 no.1
• /
• pp.13-17
• /
• 2016

It is highlighted that increasing the adsorbent surface area on volumetric basis is very important in providing an easy access for gas molecules. Fine particles around $3{\mu}m$ of soft-burned dolomite kiln dust (SB-DKD) were hydrated to wet slurry samples by ball mill process and then placed in a chamber to use spray dryer method. Spherical granules with particle size distribution of $50{\sim}60{\mu}m$ were prepared under the experimental condition with or without addition of a pore-forming agent. The relationship between bead size of the pore-forming agent and size of SB-DKD particles is the most significant factor in preparation of spherical granules with a high porosity. Whereas addition of smaller beads than SB-DKD resulted in almost no change in the surface porosity of spherical granules, addition of larger beads than SB-DKD contributed to obtaining of the particles with both 15 times larger average pore volume and 1 order of magnitude larger porosity. It is considered that spherical granules with improved $N_2$ gas adsorption ability may also be utilized for other atmospheric gas adsorption.