• 제목/요약/키워드: Formic Acid

검색결과 511건 처리시간 0.024초

Photocatalytic Degradation of Organic Compounds Using $TiO_2$ Membranes

  • 현상훈;심세진
    • 한국막학회:학술대회논문집
    • /
    • 한국막학회 1992년도 추계 총회 및 학술발표회
    • /
    • pp.9-9
    • /
    • 1992
  • 막 반응기(membrane reactor)는 365 nm 의 파장을 갖는 UV를 담체튜브 및 코팅막에 조사시켜 막 표면에서 유기물의 산화반응이 일어날수 있도록 고안하였으며 일차적으로 formic acid의 산화효율을 측정하였다. 코팅된 담체는 코팅하지 않은 담체에 비해 flux가 상당히 저하하는 반면에 formic acid의 산화효율은 이에 비례하여 증가하였다. 또한 본 실험의 결과로부터 수처리공정에서 문제시되는 난분해성 유기물질의 산화분해처리에 대한 광촉매 막의 응용성을 제시하고자 한다.

  • PDF

클리브랜드 개방식 장치를 이용한 2성분계의 인화점 (Flash Points of the Binary Solutions Using Cleveland Open Cup Tester)

  • 하동명;이성진
    • 한국화재소방학회논문지
    • /
    • 제25권1호
    • /
    • pp.57-62
    • /
    • 2011
  • 인화점은 공정안전을 평가할 때 산업공정에서 가연성 액체의 중요한 연소 특성 가운데 하나이다. 본 연구에서는 클리브랜드 개방식 장치를 사용하여 n-propanol + formic acid계와 acetic acid + propionic acid계의 인화점을 측정하였다. 실험값은 Raoult의 법칙과 최적화 기법에 의해 추산된 값과 비교하였다. 그 결과, 최적화 기법에 의한 추산값이 Raoult의 법칙에 의한 추산값 보다 실험값에 더욱 근접하였다.

Pyrimidines과 pyrimidine의 헤테로고리의 합성 (Synthesis of Pyrimidines and Heteroannulated Pyrimidine Ring Systems)

  • Mohammed, F.K.;Badrey, M.G.
    • 대한화학회지
    • /
    • 제55권2호
    • /
    • pp.218-229
    • /
    • 2011
  • Imine 화합물 1을 hydrazine hydrate와 같은 nitrogenous 시약과 반응시켜서 치환된 pyrimidines 화합물을 합성하였다. 얻어진 화합물 2를 다양한 반응조건, 즉 propionic acid, formic acid, ethyl chloroformate, acdetic anhydride, carbon disulphide, cyanogene bromide, triflauroacetic acid 및 ethyl chloroacetate와 반응시켜서 대응하는 화합물을 좋은 수율로 얻었으며, 반응은 Dimroth-type 자리옮김 반응을 통하여 진행되었다.

HPLC에 의한 목초액 중의 유기산, 페놀 및 벤조피렌의 분석법 개발 (HPLC Analysis of Organic Acids, Phenol, and Benzopyrene in Wood Vinegar)

  • 이계원;김아람;조재수
    • 약학회지
    • /
    • 제52권1호
    • /
    • pp.12-19
    • /
    • 2008
  • The organic acids (formic acid, acetic acid and propionic acid), phenol and benzopyrene in wood vinegar were determine by HPLC. An $Atlantis^{TM}dC_{18}$ column with a acetonitrile: 0.1% phosphoric acid (5: 95, organic acids), acetonitrile: water (10 : 90, phenol), 100% acetonitrile (benzopyrene) as a mobile phase was used. Retention time of acetic acid, formic acid, propionic acid, phenol and benzopyrene was 4.77, 3.73, 9.08, 30.97 and 6.10 min, respectively. The calibration curves of organic acids, phenol, benzopyrene were linear over the concentration range of $30{\sim}500,\;60{\sim}1000$, and $3{\sim}50\;{\mu}g/ml$ with correlation coefficient of above 0.999. The limit of detection (LOD) and limit of quantitation (LOQ) of acetic acid, formic acid, propionic acid, phenol, and benzopyrene was 1.71 and 5.19, 1.11 and 3.35, 4.87 and 14.74, 6.45 and 19.55, 0.08 and $0.24\;{\mu}g/ml$, respectively. The coefficients of variation for intra- and inter-day assay were $0.21{\sim}4.14$ and $0.07{\sim}1.19%$, respectively and the precision was $95{\sim}115%$. From this study, we suggest that HPLC is suitable method for the determination of organics in wood vinegar and could be applied to quality control of wood vinegar.

n-Propanol과 Formic acid계의 자연발화온도 측정 (The Measurement of Autoignition Temperature for n-Propanol and Formic acid System)

  • 박상훈;안종일;김세호;박윤아;최진영;한진석;오수용;장선연;하동명
    • 한국화재소방학회:학술대회논문집
    • /
    • 한국화재소방학회 2013년도 춘계학술대회 초록집
    • /
    • pp.164-164
    • /
    • 2013
  • 화학 관련 산업은 고온, 고압뿐만 아니라 반응성이 큰 물질들을 사용하는 복잡한 공정으로 이에 맞는 안전기술이 요구된다. 산업 현장에서 취급하고 있는 각종 화학물질의 안전관리를 어렵게 하는 이유는 취급하는 물질의 화재 및 폭발 특성치에 관한 자료가 부족하거나 정확하지 않은 연소 특성치를 사용하기 때문이다. 가연성물질의 연소현상 가운데 하나인 자연발화는 가연성 혼합기체에 열 등의 형태로 에너지가 주어졌을 때 스스로 타기 시작하는 산화현상으로, 주위로부터 충분한 에너지를 받아서 스스로 점화할 수 있는 최저온도를 최소자연발화온도(AIT : Auto ignition Temperature)라고 한다. 최소자연발화온도는 가연성 액체의 안전한 취급을 위해 중요한 지표가 된다. 순수물질의 최소자연발화온도를 문헌들에서 비교하면, 동일 물질인데도 불구하고 문헌에 따라 다른 최소자연발화온도가 제시되고 있다. 따라서 사업장에서 사고를 예방하기 위해서는 정확한 연소 특성 자료를 이용해야 해야 한다. 그러나 문헌에 제시된 대부분의 자료들은 과거 표준장치 및 자체 제작된 장치 등을 사용해서 얻은 결과이므로, 최근에 고안된 표준 장치를 이용한 결과가 매우 유용한 자료가 될 것으로 본다. 본 연구에서는 자연발화온도를 측정하는데 있어서 최근에 고안된 표준장치인 ASTM E659장치를 이용하여 n-Propanol과 Formic acid 혼합물의 최소자연발화 온도를 측정하였다. n-Propanol과 Formic acid 혼합물의 최소자연발화 온도는 화학 관련 산업 공정에서 매우 중요한 자료가 될 것이다.

  • PDF

Characteristics of Plasma Blacks Used as an Electrode of Direct Formic Acid Fuel Cell

  • Park, Young-Sook;Choi, Jong-Ho;Han, Jong-Hee;Lim, Tae-Hoon;Beak, Young-Soon;Ju, Jeh-Beck;Shon, Tae-Won;Lee, Joong-Kee
    • Carbon letters
    • /
    • 제6권1호
    • /
    • pp.41-46
    • /
    • 2005
  • Plasma carbon blacks of 20~30 nm diameter were synthesized by direct decomposition of natural gas using a hybrid plasma torch system with 50 kW direct current and 4 MHz of radio frequency. The insulating rector which inside diameter of 400 mm and length of 1500 mm, respectively was kept at 300~$400^{\circ}C$ during the preparation. The ultimate analysis of plasma carbon blacks reveals that the raw plasma carbon blacks contains a large quantity of volatile which is mainly consist of hydrogen. Therefore devolatilization of raw plasma carbon blacks were carried out at $900^{\circ}C$ for one hour under nitrogen atmosphere. The devolatilization leads to the decrease in electrical resistivity and surface oxygen functional groups of plasma carbon black significantly. In order to investigate the plasma carbon as a catalyst support, devolatilized plasma black at $900^{\circ}C$ (DPB) supported PtAu catalyst was synthesized by sodium boronhydride reduction method. Electrochemical measurements and direct formic acid fuel cell test indicated that catalytic activity of DPB supported PtAu catalyst for formic acid oxidation was similar to that of Vulcan XC-72 of commercial carbon black supported one.

  • PDF

미생물과 개미산 첨가가 팽이버섯 수확후배지의 저장성에 미치는 영향 (Effect of Microbes and Formic acid on Storage of Spent Mushroom (Flammulina velutipes) Substrates)

  • 문여황;이성실;조용운;조수정
    • 한국버섯학회지
    • /
    • 제10권4호
    • /
    • pp.244-248
    • /
    • 2012
  • 팽이버섯 수확후배지의 사료화에 가장 적합한 저장법을 제시하기 위하여 미생물과 개미산을 처리한 팽이버섯 수확후배지를 퇴적, 뒤집기, 비닐피복 등의 방법으로 저장한 다음 미생물과 개미산 처리가 팽이버섯수확후배지의 저장성에 미치는 영향을 조사하였다. 저장기간에 따른 처리구별 팽이버섯 수확후배지의 외관적 성상변화를 종합해보면 저장기간 동안 모든 처리구에서 버섯 균사체가 버섯수확후배지의 표면에 우점하고 있었으며 호기적 조건보다는 혐기적 조건에서 저장성이 향상되었고 개미산 처리와 같은 화학적 처리법보다는 미생물을 접종한 처리구의 저장성이 향상됨을 확인할 수 있었다. 미생물과 개미산을 처리한 버섯수확후배지를 퇴적, 비닐피복, 뒤집기 등의 방법으로 8일 동안 저장하면서 버섯수확후배지의 온도, pH, 일반세균 수 등을 조사한 결과, 온도, pH, 일반세균 수는 미생물과 개미산 무처리구를 뒤집기한 경우에 가장 높게 나타났다.

포름산 연료전지의 경쟁력 (Competitiveness of Formic Acid Fuel Cells: In Comparison with Methanol)

  • 엄성현;서민혜;이재영
    • 공업화학
    • /
    • 제27권2호
    • /
    • pp.123-127
    • /
    • 2016
  • 메탄올 연료전지는 수소의 제조, 저장 및 운반에 대한 기술적, 재정적 문제로 인해 개발이 촉발되어 에너지밀도가 높은 연료라는 장점으로 포름산 연료전지에 비해 활발히 연구가 진행되어 왔다. 하지만, 포름산 연료전지에 대해서도 전극촉매를 비롯한 핵심부품의 개발 및 연료의 물질전달 특성 등에 대한 연구가 지속적으로 수행되면서 액체 연료전지로써 보다 적합한 연료가 무엇인가에 대해서 실질적인 비교분석이 필요하게 되었다. 본 논문에서는 포름산과 메탄올 연료전지에 대하여 전극촉매, 연료 확산, 크로스오버, 물 관리, 효율, 시스템 구성 측면에서 연구개발 동향을 소개하며 향후 전망에 대해서 고찰하고자 한다.

Photochemical Reaction of Nalidixic Acid in Methanol

  • Park, Hyoung-Ryun;Park, Ok-Hyun;Lee, Hong-Yune;Seo Jung-Ja;Bark, Ki-Min
    • Bulletin of the Korean Chemical Society
    • /
    • 제24권11호
    • /
    • pp.1618-1622
    • /
    • 2003
  • The photochemical reactions of methanolic nalidixic acid (NAL) solution in the absence and in the presence of air have been investigated using 300 nm UV light. From the reactions, 1-ethyl-7-methyl-4-oxo-4-hydro-1,8-naphthyridine (EMDN),formic acid, and formaldehyde are produced. In the presence of air, hydrogen peroxide is also detected along with the products listed above. The presence of oxygen during the irradiation of methanolic NAL solution effects on the product yield. The initial quantum yields of the products and of the NAL decomposition are determined. Possible reaction pathways for the photochemical reaction are suggested on the basis of the products analysis.

목질계 Biomass의 변환 이용(II) - 목질계 바이오매스로부터 solvolysis법에 의한 용해용 펄프의 제조 - (Conversion of Woody Biomass for Utilization(II) - Preparation of Dissolving Pulp by Solvolysis from Woody Biomass -)

  • 양재경;임부국;장준복;이종윤
    • Journal of the Korean Wood Science and Technology
    • /
    • 제25권4호
    • /
    • pp.45-50
    • /
    • 1997
  • This research was studied for dissolving pulp preparation as the raw material of viscose rayon from woody biomass by solvolysis pretreatment. In the change of pulp characteristic after solvolysis pretreatment, the following results were obtained. In the case of solvolysis pretreatment, we have obtained pulp that high purity cellulose, and degree of polymerization was inclined to decrease less than 440 on the phosphoric acid as catalyst. Comparing phosphoric acid and formic acid as catalyst in the solvolysis pretreatment, using on formic acid catalyst is superior to phosphoric acid catalyst for making dissolving pulp.

  • PDF