• 제목/요약/키워드: Formation Operating System

검색결과 113건 처리시간 0.034초

수류확산과 초음파와 오존을 이용한 현장 수질 개선 평가 (Field Study of Water Quality Improvement by Circulation, Sonication and Ozonation)

  • 테킬안디넷;김일호;이재엽
    • 한국물환경학회지
    • /
    • 제33권2호
    • /
    • pp.170-180
    • /
    • 2017
  • 본 연구에서는 수원 여천천에서 원천저수지로의 유입부 정체수역에 수류확산장치, 초음파와 오존 처리를 구성한 시스템이 수질에 미치는 영향을 항목 단위로 조사하였다. 샘플링은 기기 운전 전과 이후 1, 3, 6 시간에 여섯 지점에서 수집되었다. 수류확산장치만을 작동하였을 때, 용존산소는 80%까지 감소하였고, Chl-a는 하류 25m에서 3시간 후 90%까지 감소했다. 초음파를 병행한 경우에는 장치로부터 100 m 거리까지 Chl-a가 80% 이상 제거되었다. 한편 총 용존 인은 초음파 처리 전 $420({\pm}70){\mu}g/L$에서 처리 후 $160({\pm}40){\mu}g/L$까지 감소되었다. 수류확산장치와 초음파에 오존을 처리한 결과, Chl-a는 암모니아성 질소가 $60{\mu}g/L$에서 $20{\mu}g/L$으로 감소하였다. 오존의 경우 안전을 위해 $3{\times}10^{-3}mg/L$ 및 짧은 반응 시간으로 적용하였으나 시스템에 의한 장치 구성이 오존을 비롯한 처리를 통합하는 효과를 낼 수 있었다. 본 연구로부터 수류확산장치와 초음파 가 보여준 Chl-a의 탁월한 처리 성능은 녹조 형성을 방지하는 효과적인 방안으로 제시될 수 있다.

시화호 조력발전소 운영에 의한 시화호 외측 해역에서의 체류시간 변화 (Residence Time Variation by Operation of Sihwa Tidal Power Plant in Outer Sea of Sihwa Lake)

  • 배윤호;윤병일;서창훈;박성진;방기영;권효근;우승범
    • 한국해안·해양공학회논문집
    • /
    • 제29권5호
    • /
    • pp.247-259
    • /
    • 2017
  • 입자추적기법(Lagrangian Particle Tracking; LPT)을 적용한 수치모델을 이용하여 조력발전소 운영에 의한 시화호 외측해역에서의 체류시간 변화를 파악하였다. 수치모델의 실험안은 공간적인 분포 특징을 살펴보기 위하여 시화호 외측 해역을 4개 구역으로 나누어 구역별 평균체류시간을 산정하였다. 구역별 평균체류시간은 운영 전과 운영 중 모두 가장 외해에 위치한 지역(약 3일)에서 내만에 위치한 지역(약 13일)으로 진입할수록 증가하는 특징이 나타났다. 구역별 평균체류시간 변화를 운영 전과 운영 중으로 비교하면 운영 전에 비해 운영 중에 가장 외해에 위치한 지역에서는 증가하고 나머지 구역에서는 감소하였다. 조력발전소 운영에 의한 인위적인 배수는 가장 외해에 위치한 지역에서 와동(vortex) 형성으로 입자 정체를 유발하였고, 나머지 지역에서는 연행작용(entrainment)을 발생시켜 체류시간의 변화에 영향을 주었다. 즉, 배수 시 발생하는 제트류(jet flow)와 와동, 연행작용으로 인한 체류시간 변화는 외해와 내만의 수평적 혼합 증가를 보여준다.

대용량 자원 기반 과학기술 핵심개체 탐지를 위한 정보추출기술 통합에 관한 연구 (A Study on the Integration of Information Extraction Technology for Detecting Scientific Core Entities based on Large Resources)

  • 최윤수;정창후;최성필;류범종;김재훈
    • 정보관리연구
    • /
    • 제40권4호
    • /
    • pp.1-22
    • /
    • 2009
  • 대용량 문서에서 정보를 추출하는 작업은 정보검색 분야 뿐 아니라 질의응답과 요약분야에서 매우 유용하다. 정보추출은 비정형 데이터로부터 정형화된 정보를 자동으로 추출하는 작업으로써, 개체명 인식, 전문용어 인식, 대용어 참조해소, 관계 추출 작업 등으로 구성된다. 이들 각각의 기술들은 지금까지 독립적으로 연구되어왔기 때문에, 구조적으로 상이한 입출력 방식을 가지며, 하부모듈인 언어처리 엔진들은 특성에 따라 개발 환경이 매우 다양하여 통합 활용이 어렵다. 과학기술문헌의 경우 개체명과 전문용어가 혼재되어 있는 형태로 구성된 문서가 많으므로, 기존의 연구결과를 이용하여 접근한다면 결과물 통합과정의 불편함과 처리속도에 많은 제약이 따른다. 본 연구에서는 생의학 분야 과학기술 문헌을 분석하여 전문용어 및 개체명 등을 통합 추출할 수 있는 기반 프레임워크를 개발한다. 이를 위하여, 문장자동분리, 품사태깅, 기저구인식 등과 같은 기반 언어 분석 모듈은 물론 이를 활용한 개체명 인식기, 전문용어 인식기를 개발하고 이들을 하나의 플랫폼으로 통합한 과학기술 핵심개체 인식 체계를 제안한다. 전체 플랫폼의 성능을 체계적으로 평가하기 위해서, KEEC 2009를 비롯한 다양한 말뭉치를 기반으로 세부 요수 모듈에 대한 성능 평가를 수행하였으며, 비교적 높은 수준의 성능을 확보하였다. 본 논문에서 개발된 핵심개체자동인식 플랫폼은 정보검색, 질의응답, 문서색인, 사전구축 등 다양한 정보서비스 분야에 활용될 수 있다.

초임계 반용매 재결정 공정을 이용한 Dextran 입자의 제조 (Preparation of Dextran Microparticles by Using the SAS Process)

  • 강동육;민병준;노선균;강춘형
    • Korean Chemical Engineering Research
    • /
    • 제46권5호
    • /
    • pp.958-964
    • /
    • 2008
  • 본 연구에서는 초임계 이산화탄소를 반용매로 하는 재결정 공정(SAS, Supercritical Anti-Solvent)을 이용하여 약물 전달시스템의 후보물질로 주목받고 있는 dextran의 미립자를 제조하였다. 용매로는 DMSO(dimethyl sulfoxide)를 사용하였으며, 공정변수인 온도(308.15~323.15 K), 압력(90~130 bar), 용질의 농도(10~20 mg/ml), 용액 주입속도(5.3~15.2 ml/min) 그리고 용질의 분자량(Mw=37,500, 400,000~500,000)이 미세입자 형성에 미치는 영향을 관찰하였다. 형성되는 미세입자의 크기는 용질 농도가 증가할수록 증가하였으나, 용액 주입속도와 압력은 입자 크기에 큰 영향을 미치지 않았다. 저분자량의 dextran의 경우에는 313.15 K에서 가장 작은 입자가 만들어졌으며, 고분자량의 dextran의 경우에는 $0.1{\sim}0.5{\mu}m$정도 크기의 입자가 만들어 졌으며 온도와 압력이 커질수록 입자의 크기도 증가하였다. 용질의 농도가 5 mg/ml인 경우, 분자량이 작은 dextran 으로는 입자를 제조할 수 없었으며 고분자량의 경우에는 용질 농도가 15 mg/ml 까지 증가하면 제조된 입자들이 서로 엉키는 경향을 보였다. 분자량이 작은 경우에는 낮은 농도에서는 재결정조에서 충분한 과포화도를 얻을 수 없어 침투성과 확산계수가 큼에도 불구하고 재결정화가 이루어지지 못하며, 분자량이 큰 고분자계의 높은 농도에서는 서로 상호작용하는 인력이 저분자에 비해 크게 증가하게 되어 입자들이 엉키게 되는 것으로 사료된다.

고전압 구동 Li2MnO3-LiMO2(M=Ni, Co, Mn)/graphite 시스템에서의 전지 수명 및 고온 방치 특성 향상에 효과적인 플루오로 화합물계 전해액에 대한 연구 (Improved Cycle Life and Storage Performance in High-Voltage Operated Li2MnO3-LiMO2(M=Ni, Co, Mn)/Graphite Cell System by Fluorine Compounds as Main Electrolyte Solvent)

  • 유정이;신우철;이병곤
    • 전기화학회지
    • /
    • 제16권3호
    • /
    • pp.162-168
    • /
    • 2013
  • $Li_2MnO_3-LiMO_2$(M=Ni, Co, Mn) 나노 복합체는 높은 이론 용량을 가지고 있어 전기 자동차용 2차 전지 활물질 재료로 많은 연구가 진행되고 있다. 하지만 $Li_2MnO_3-LiMO_2$(M=Ni, Co, Mn)로부터 250 mAh/g 이상의 용량을 구현하기 위해서는 4.4 V 이상의 구동전압이 필요하며, 이러한 높은 구동 전압은 전지의 수명 및 고온 방치 특성의 저해 요소로 작용하고 있다. 본 연구에서는 이러한 문제점을 개선하기 위해서 FEC (Fluoroethylene carbonate), 플루오로알킬 에테르, $LiPF_6$가 주성분인 신규 전해액(F-based EL)을 설계하였다. F-based EL은 1.3 M $LiPF_6$ EC/EMC/DMC (3/4/3, v/v/v) (STD) 대비 안정한 SEI를 형성하며, 산화 안정성이 뛰어나 $Li_2MnO_3-LiMO_2$(M=Ni, Co, Mn)/graphite 셀의 수명 및 방치 중 가스 저감에 효과가 있음을 확인할 수 있었다.

Strain-Relaxed SiGe Layer on Si Formed by PIII&D Technology

  • Han, Seung Hee;Kim, Kyunghun;Kim, Sung Min;Jang, Jinhyeok
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
    • /
    • pp.155.2-155.2
    • /
    • 2013
  • Strain-relaxed SiGe layer on Si substrate has numerous potential applications for electronic and opto- electronic devices. SiGe layer must have a high degree of strain relaxation and a low dislocation density. Conventionally, strain-relaxed SiGe on Si has been manufactured using compositionally graded buffers, in which very thick SiGe buffers of several micrometers are grown on a Si substrate with Ge composition increasing from the Si substrate to the surface. In this study, a new plasma process, i.e., the combination of PIII&D and HiPIMS, was adopted to implant Ge ions into Si wafer for direct formation of SiGe layer on Si substrate. Due to the high peak power density applied the Ge sputtering target during HiPIMS operation, a large fraction of sputtered Ge atoms is ionized. If the negative high voltage pulse applied to the sample stage in PIII&D system is synchronized with the pulsed Ge plasma, the ion implantation of Ge ions can be successfully accomplished. The PIII&D system for Ge ion implantation on Si (100) substrate was equipped with 3'-magnetron sputtering guns with Ge and Si target, which were operated with a HiPIMS pulsed-DC power supply. The sample stage with Si substrate was pulse-biased using a separate hard-tube pulser. During the implantation operation, HiPIMS pulse and substrate's negative bias pulse were synchronized at the same frequency of 50 Hz. The pulse voltage applied to the Ge sputtering target was -1200 V and the pulse width was 80 usec. While operating the Ge sputtering gun in HiPIMS mode, a pulse bias of -50 kV was applied to the Si substrate. The pulse width was 50 usec with a 30 usec delay time with respect to the HiPIMS pulse. Ge ion implantation process was performed for 30 min. to achieve approximately 20 % of Ge concentration in Si substrate. Right after Ge ion implantation, ~50 nm thick Si capping layer was deposited to prevent oxidation during subsequent RTA process at $1000^{\circ}C$ in N2 environment. The Ge-implanted Si samples were analyzed using Auger electron spectroscopy, High-resolution X-ray diffractometer, Raman spectroscopy, and Transmission electron microscopy to investigate the depth distribution, the degree of strain relaxation, and the crystalline structure, respectively. The analysis results showed that a strain-relaxed SiGe layer of ~100 nm thickness could be effectively formed on Si substrate by direct Ge ion implantation using the newly-developed PIII&D process for non-gaseous elements.

  • PDF

부정기선 운임율의 결정에 관한 이론적 고찰 (A Study on the Determination of Tramp Freight Rates)

  • 이종인
    • 한국항해학회지
    • /
    • 제4권2호
    • /
    • pp.45-79
    • /
    • 1980
  • The aim of this paper is to analyze the mechanics of price formation in the tramp shipping. For the purpose of this study, the main characteristics of tramp freight rates and the market is examined, and a brief examination of the nature ofthe costs of operation is given which are essential for the understanding of the functioning of shipping firms as well as for the understanding of developments in the tramp freight market. The demand and supply relationships in the market is also analysed in detail. Tramp shipping is an industry that has a market which functions under conditions that are not dissimilar to the theoretical model of perfect competition. However, it does notmean that tramp shipping market is a perfectly competitive market. It is apparent that this realworld competitive system has its imperfections, which means that the market for tramp shipping is near to being a perfectly competitive market on an internaitonal scale and it is freight are therefore subjext to the laws of supply and demand. In theory, the minimum freight rate in the short term is that at which the lowest cost vessels will lay-up in preference to operating, and is equal to the variable costs minus lay-up costs; and this would imply that in all times except those of full employment for ships there is a tendency for newer low-cost, and, probably, faster vessels to be driving the older high-cost vessels in the breaker's yards. In this case, shipowners may be reluctant to lay-up their ships becasue of obligations to crews, or because they would lose credibility with shippers or financiers, or simply because of lost prestige. Mainly, however, the decision is made on strictly economic grounds. When, for example, the total operating costs minus the likely freight earnings are greater than the cost of taking the ship out of service, maintaining it, and recommissioning it, then a ship may be considered for laying-up; shipowners will, in other words, run the ships at freight earnings below operating costs by as much as the cost of laying them up. As described above, the freight rates fixed on the tramp shipping market are subject to the laws of supply and demand. In other words, the basic properties of supply and demand are of significance so far as price or rate fluctuations in the tramp freight market are concerned. In connection with the same of the demand for tramp shipping services, the following points should be brone in mind: (a) That the magnitude of demand for sea transport of dry cargoes in general and for tramp shipping services in particular is increasing in the long run. (b) That owning to external factors, the demand for tramp shipping services is capable of varying sharphy at a given going of time. (c) The demad for the industry's services tends to be price inelastic in the short run. On the other hand the demand for the services offered by the individual shipping firm tends as a rule to be infinitely price elastic. In the meantime, the properties of the supply of the tramp shipping facilities are that it cannot expand or contract in the short run. Also, that in the long run there is a time-lag between entrepreneurs' decision to expand their fleets and the actual time of delivery of the new vessels. Thus, supply is inelastic and not capable of responding to demand and price changes at a given period of time. In conclusion, it can be safely stated that short-run changes in freight rates are a direct result of variations in the magnitude of demand for tramp shipping facilities, whilest the average level of freight rates is brought down to relatively low levels over prolonged periods of time.

  • PDF

삼국시대(三國時代) 병기체제(兵器體制)의 연구(硏究) (This Study of the Arms Used in the Three Kingdoms)

  • 김성태
    • 헤리티지:역사와 과학
    • /
    • 제34권
    • /
    • pp.20-58
    • /
    • 2001
  • In order to unravel the characteristics of arms used in the 'Three Kingdoms,' Kokuryo, Silla and Paikje. the classification and the developing procedures of the arms should be first discussed. At first, the basic arms of the soldiers of Three Kingdoms were iron swords, iron spearheads, and bows. During that period, swords attached a ring pommel were commonly used. But after 5A. D. a sword with a decoration pommel appeared. Infantry generally used iron spearheads. From the late 4A. D. the long spearheads were broadly used in cavalry battles. In the late 6A. D. infantry mainly used long spearheads, and this resulted in the foundation of long spearheads units. There were two kinds of bows: Short Bow whose arch is small and Long Bow whose arch is long. It is known that the Short Bow was widely used in Kokuryo and Paikje up to 5A. D. In the early era, infantry used Long Bow, yet it was vastly used after 6A. D. when a castle's strategical value was great and defending a castle was. significant. Above mentioned, as basic combat weapons, iron spearhead and bow were fundamental. In particular, the spearhead was the essential weapon to a soldier. Yet, arrow gun and hook-shape cutters were important weapons. Especially, after 6A.D., when a castle became strategically pivotal in military, the arrow gun became the important weapon. This resulted in the foundation of arrow gun units. Hook-shape cutters were used to snatch horsemen or to climb up to fall the castle. Yet, the cutter was not the Three Kingodoms' basic weapon. In addition, the three stages of arms development in the Three Kingdoms are formation stage, development stage, and settlement stage. The formation stage was the period when premitive military unit appeared in the Three Kingdoms. It ranged from 1B. C. to the mid 3A. D. At that time according to regions. there were two weapon systems operating: North area including Kokuryo and the northern part of Paikje and South area including Silla, Kaya and the southern part of Paikje. ln North area a sword with a ring attached at the end of the holder, iron spear with neck and mid-size flat holder and iron arrowhead with an extension to fix, were used. In this period, during a war calvary units were mostly used and their weapon systems seemed possibly to succeed in that of Kochosun. In the development stage, when LoLang's influence on surroundings became weak, Koguryo, Paikjae and Silla had directly contacted each other. In the late 3A.D. to the early 6A.D., Silla achieved a drastic improvement in weapon system. This was the period when Kokuryo played a leading role in arms race. Kokuryo's arms manufacturing techniques passed onto Silla, Kaya and Paikje. In combat strategy a joint operation between infantry and calvary prevailed even if their military tactics were different. In a calvary battle heavily armed horsemen played import roles at this period. The horsemen and even horses were heavily guarded with iron armors. After all, the appearance of fully armed horsemen implies the very need of powerful destructive forces in weapon system. At that time, basic weapons were a big sword with a ring attached at the end of the holder, swallow's tail-shape spear with neck, and iron spearhead with neck and an extension. The settlement stage began at the mid 6A.D., when it was the revolutionary period in the arms development history. Of course, actual proofs and picture documents were not sufficient enough to penetrate full scale of the weapon system. But, according to historical circumstances and historic records, it is very certain that this period was the peak in arms development. In this period special military units, such as infantry-calvary companies, Archery units and Long spear units, that executed particular duties with special weapons, were founded. This became the characteristics of the settlement stage.

초임계 이산화탄소를 이용한 5-FU 함유 생분해성 고분자 미세입자 제조 (Preparation of Biodegradable Polymer Microparticles Containing 5-FU Using Supercritical Carbon Dioxide)

  • 정주희;정인일;주현재;신재란;임교빈;유종훈
    • KSBB Journal
    • /
    • 제23권5호
    • /
    • pp.452-459
    • /
    • 2008
  • 본 연구에서는 뛰어난 항암효과를 가지고 있지만 매우 짧은 반감기로 인한 많은 투약 빈도수와 이로 인한 부작용을 나타내는 5-FU의 부작용을 줄이고 투약의 편의성을 증대시키고자 생분해성 고분자인 L-PLA에 약물이 봉입된 미세입자를 제조하였다. 제조 방법으로는 기존의 미립자 약물전달체 제조 공정의 문제점을 상당 부분 개선시킬 수 있는 대체 공정으로 주목받고 있는 초임계 ASES 공정을 사용하였다. 고분자의 분자량 및 분자량이 다른 동일한 고분자와의 블렌딩, 용매, 약물 투입량 등의 변수가 미세입자의 형성과 약물의 회수율, 봉입효율 및 방출에 미치는 영향을 고찰하여 초임계 유체 공정의 적용 가능성 여부를 조사하였다. 5-FU와 L-PLA의 용매로 각각 MeOH와 DCM을 사용한 경우 가장 좋은 결과가 얻어졌으며, L-PLA의 분자량이 큰 경우 구형의 입자가 생성되었으며 입자의 크기도 작은 결과가 나타났다. 모든 실험에서 약물의 봉입효율이 매우 낮게 나타났는데 이는 5-FU와 L-PLA의 매우 낮은 친화도에 기인하는 것으로 판단된다. 약물과 고분자 간의 재결정화 속도의 차이를 얼마나 줄일 수 있는가가 약물 봉입효율에 가장 큰 영향을 미칠 것으로 판단되며, 약물의 봉입효율을 향상시키기 위해서는 향후 초임계 공정의 공정변수에 대한 좀 더 자세한 연구와 약물과 고분자간의 친화력을 높여 일 수 있는 첨가제에 대한 연구가 필요할 것으로 생각된다.

TBP 용매추출에 의한 잔존 우라늄 제거공정 평가 (Evaluation of A Removal Process for the Residual Uranium from the Simulated Radwaste Solution by Solvent Extraction with TBP)

  • 이일희;김광욱;임재관;권선길;유재형
    • 공업화학
    • /
    • 제9권2호
    • /
    • pp.232-237
    • /
    • 1998
  • 본 연구에서는 19계 성분 원소들이 함유된 모의 방사성 용액으로부터 미량 잔존하고 있는 U을 분리하기 위한 최적 조건 설정 및 연속공정으로의 구성을 최적화하기 위한 공정 평가를 수행하였다. 실험은 TBP에 의한 용매추출 공정을 선정하여 총 18단 2조의 연속식 용매추출 장치인 혼합정치조를 이용하였다. U, Np, 및 Tc의 추출율은 각각 99.2%, 32.1%, 및 99.9%이며, 기타 원소들은 1~4% 전도가 추출되었다. U의 경우 다성분계 회분식에서 얻어진 Nd나 Fe와 같은 공존원소의 영향으로 인하여 U이 약 80% 정도만이 추출된다는 기존 보고를 능가하는 것으로, 이는 다단 연속추출 장치의 특성에 기인하는 것 같다. 그리고 Np의 추출율 감소는 질산용액에 존재하는 다양한 산화가 상태에 기인하며, Tc의 경우는 Tc과 공존하고 있는 Zr 또는 U과의 착물 형성에 의해 추출율이 증가된 것으로 사료된다. 한편 유기상으로 추출된 모든 원소들은 0.01M의 질산에 의해 99% 이상이 수용상으로 역추출되었다. 이상의 결과로부터 TBP에 의한 잔존 U 제거 공정은 별 문제가 없다. 다만 Np이 추잔상과 U 생성물로 각각 분배되어 있으므로 방사성 핵종의 확산방지 측면에서 이를 한 공정에서 총괄 처리할 수 있는 공정 개발이 요구된다.

  • PDF