• 한국의류학회지
• /
• 제18권5호
• /
• pp.646-660
• /
• 1994

The purpose of this study was to investigate the difference of the visual evaluation about Clothing form and the surface image of detail. This study consists of pre-experiment for selecting the method of expression among detail which shows difference of the image and main experiment for identifying the clothing image as clothing form and the suface image of detial. Main experiment is made of factorial design for three variables-clothing form (H-line, A-line, V-line, X-line), detail (frill, tape), direction (width, length). Questionaire consists of 24 semantic differential scale expressing clothing form and detail. The subjects were 100 female students majoring in clothing and textile.7he data were analyzed by Frequencey, Factor analysis, Anova, scheffe's test and MCA method. The major findings were; 1) The image of clothing form and the surface image of detail were composed of 5 factors; attractiveness, prettiness, attention, modern, young. 2) For the visual evaluation of clothing form as the surface image of detail, there were significant differences in prettiness and attention factors. For the pretty and attentive image, we should express by the image of frill. 3) For the visual evaluation of the image of detail as clothing forms variation, there were significant difference in prettiness by A-line and X-line. 4) For the effect of clothing form and the surface image of detail, main effect was significant in attractiveness, prettiness, attention, modern factor. For the pretty image of clothing, it will be expressed by the image of frill and A-line, X-line. For the attentive image of clothing, it will be expressed by the image of frill and V-line. For the modern image of clothing, it will be expressed by the image of tape and V-line.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.474-478
• /
• 2006

It is becoming more significant to develop a rotary voice coil motor(VCM) type's actuator for small form factor (SFF) optical disk drive(ODD), as portables are getting more and more popularized nowadays. The actuator which is applicable to small-sized ODD with a compact flash(CF) II card size was developed and fabricated. The experimental results showed that the finite element(FE) model is different from the fabricated model. And so flexible mode frequencies did not satisfy specifications of small-sized ODD, and tuning. Tuning procedures were required to improve dynamic characteristics of the fabricated actuator through finite difference method(FDM). At first, design variables were extracted through parameter study and the tuned FE model was improved by design of experiment(DOE). Consequently, It was confirmed that the improved model was applicable to SFF ODD.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.351-351
• /
• 2004

For greeting the era of ubiquitous network, data storage devices have been essentially attached to mobile data devices. As a result, the minimization of the storage device has arisen as major interests in the next generation data storage technology. So, there are many researches for the small form factor ODD. In this paper, we propose a pick up that consists of a linear VCM and 2-wire focusing actuator for a small form factor ODD. For the sake of checking performance of the coarse actuator, PID controller is designed. Experiment with controller and DSP board shows its propriety as a fine tracking actuator. And, 2-wire suspension actuator is designed in order to be contained in a coarse actuator and to satisfy the thickness of a PCMCIA type. Through the experiment of designed actuator, It verifies performance as a focusing actuator.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.672-675
• /
• 2006

It is becoming more significant to develop a rotary VCM type actuator for small form factor ODD, as portables are getting more and more popularized nowadays. In this paper, the procedure of development of the actuator which is applicable to compact flash II card and is fit in the specification of BD 1X is explained. This is based on the rotary VCM type actuator, which is good for reducing thickness. Air core solenoid coil is used in order to do focusing mechanism. And the total weight is reduced by using the structure of steel-aluminium-steel triple layer, so, the stiffness is still adequate. Additionally, the tracking coil is moved next to the actuator, so the total length was reduced, then the actuator become applicable to compact flash II card. The force of Magnetic Circuit is improved by using Magnetic Circuit DOE. And flexible mode frequency improved through the DOE of structure part. Modeling was exactly done in consideration of air core solenoid coil and pivot bearing. It is confirmed that the designed model is satisfied with the specification of BD 1X and is applicable to Compact Flash II card.

• 정보저장시스템학회논문집
• /
• 제2권3호
• /
• pp.163-168
• /
• 2006

Small form factor optical pickup (SFFOP) corresponding to BD specifications is strongly proposed for the next-generation portable storage device. In order to generate SFFOP, small sized optical pickup has been fabricated. We have developed a small sited optical pickup that is called the integrated optical pickup (IOP). The fabrication method of this system is mainly dependant on the use of the wafer based micro fabrication technology, which has been used in MEMS process such as photolithography, reactive ion etching, wafer bonding, and packaging process. This approach has the merits for mass production and high assembling accuracy. In this study, to generate the small sized optical pickup for high recording capacity, IOP corresponding to BD specifications has been designed and developed, including three main parts, 1) design, fabrication and evaluation of objective lens unit, 2) design and fabrication of IOP and 3) evaluation process of FES and TES.

• 한국전자파학회지:전자파기술
• /
• 제24권2호
• /
• pp.51-57
• /
• 2013

The current expanding mobile markets incessantly demands small form factor, low power consumption and high aggregate throughput for silicon-level integration such as memory to logic system. One of emerging solution for meeting this high market demand is 3D through silicon stacking (TSS) technology. Main challenges to bring 3D TSS technology to the volume production level are establishing a cost effective supply chain and building a reliable manufacturing processes. In addition, this technology inherently help increase number of IOs and shorten interconnect length. With those benefits, however, potential signal and power integrity risks are also elevated; increase in PDN inductance, channel loss on substrate, crosstalk and parasitic capacitance. This paper will report recent progress of wide IO memory to high count TSV logic device assembly development work. 28 nm node TSV test vehicles were fabricated by the foundry and assembled. Successful integration of memory wide IO chip with less than a millimeter package thickness form factor was achieved. For this successful integration, we discussed potential signal and power integrity challenges. This report demonstrated functional wide IO memory to 28 nm logic device assembly using 3D package architecture with such a thin form factor.

• 정보저장시스템학회논문집
• /
• 제2권1호
• /
• pp.21-25
• /
• 2006

The new multimedia information environment requires smaller optical data storage systems. However, one of the difficulties encountered in designing small form factor(SFF) optical pick-up is to emit the heat which is generated from laser diode(LD). Heat generated at the LD can reduce the optical performance of the system and the lifetime of LD. Therefore, it is important to include the thermal design in the design stage of SFF optical pick-up system for high performance and the longer lifetime of LD, and furthermore, to analyze the thermal characteristics of LD in detail micro heat transfer analysis is necessary. In the present study, micro heat transfer analysis was performed using the finite element method for the $28{\times}11{\times}2mm^3$ super slim swing-arm type optical pick-up actuator for Blu-ray disk. Two different materials were used for a swing-arm; a double layer polycarbonate/steel structure and a single aluminum structure.

• 대한건축학회논문집:구조계
• /
• 제34권3호
• /
• pp.69-76
• /
• 2018

General workers who assist various technicians in different fields with their work across the whole construction sites without having a particular skill are at risk of the highest accident rate and their accident form becomes varied. Accordingly, this study was conducted to identify the relationship between form of safety accident and influence factor in general workers and analyze accident severity by influence factor. The followings are the results from this study. First, as a result of analyzing major form of accident and influence factors in general workers with network analysis methodology, nine forms of accident and seventeen influence factors were drawn. Second, it was found that in accident severity among general workers, collapsing, among various forms of accident, appeared the highest, followed by fall, electric shock, fire, hit by an object, bumped against, trip, scission getting cut chopped in order. Third, main points of special, concentrated, and permanent management were presented in order to reduce the safety accident in general workers effectively.

• 반도체디스플레이기술학회지
• /
• 제20권4호
• /
• pp.62-67
• /
• 2021

In this study, we have successfully developed an unique NVIS Green A compatible LED by combining two technologies. One is white LED made with a black EMC (epoxy molding compound) lead frame. The other is NVIS Green A filter that shields the near infrared region made in the film method. The form factor of the developed NVIS Green A compatible LED was 2.0 × 2.0 × 0.95 mm. And it is possible to satisfy NVIS radiance and color limit specified in MIL-STD-3009 by controlling the concentration of Green A dye and the thickness of the NVIS filter as well as adjusting of color temperature of the white LED. From these results, we are expected that the developed NVIS Green A suitable LED is a promising solution for the weight reduction and the cost reduction of avionic applications.

• 정보저장시스템학회논문집
• /
• 제2권3호
• /
• pp.208-213
• /
• 2006

The present state of the design of swing arm actuators for optical disc drives is to obtain the high efficient dynamic characteristics within a very compact volume. As a necessary consequence, the need of the small form factor (SFF) storage device has been arisen as major interests in the information storage technology. In this paper, we suggest the miniaturized swing arm type actuator that has high efficient dynamic characteristics for SFF optical disk drive (ODD). For the operating mechanism, it uses a tracking electromagnetic (EM) circuit for a focusing motion together. Moreover, due to the size constraint, the thermal stability of optical head is important. Therefore, the actuator is designed to emit the heat, which is generated by optical pick-up, along the actuator body easily. Initial model is designed based on the topology optimization method considering the thermal conductivity. Then, the structural parts of the actuator are modified to maintain the high sensitivity and to have wide control bandwidth by the design of experiments method (DOE) and new concept of decreasing mass and inertia. Finally, a swing arm type actuator for SFF ODD is suggested and its dynamic characteristics are verified.