• 복식
• /
• 제60권1호
• /
• pp.101-116
• /
• 2010

In this study, the subjects are the expression methods and compositions of peony patterns in Chinese textiles. This study represents the peony patterns which are from Tang Dynasty to the Qing Dynasty, the research subjects are the peony patterns in fabric, except the peony patterns which are expressed by gold foil, embroidery and kesi. The objects of this study are 72 pieces of peony patterns. We sketched the configuration details of peony patterns through the Illustrator program. Analyze and classify the configuration accurately. Based on the 72 pieces of peony patterns, expression methods and compositions of the peony pattern are as following, firstly, we classified peony patterns into three categories, based on expression methods, as realistic shape, pattern shape and shape. Among these 72 fabric relics, there most of realistic shape 42 pieces(58.3%), pattern shape 25 pieces(34.7%), and shape 5 pieces(7.0%). Secondly, in the realistic shape peony, the most of pattern has petal accumulate as grape- shaped. This type is found in almost every Dynasty and was used regularly in the eras of Song and Ming Dynasty. In the era of Ming Dynasty, by using petals like the curly mushroom, Yeongji(靈芝), the pattern of symbolizing longevity was habitually used. The U-shaped flower pattern (type E) and the pattern of emphasizing the veins of petals are found only in the remains of the era of Qing Dynasty. Thirdly, in the pattern shaped peony, the most of pattern has some petals which are separated(type C). Fourthly, we classified peony patterns into four categories, based on compositions, as individual branch form, floral branch form, cluster branch form and floral nest form. Among these 72 fabric relics, there most of individual branch form 33 pieces(45.8%), floral branch form 18 pieces(25.0%), cluster branch form 13 pieces(18.1%), floral nest form 8 pieces(11.1%).

• 한국지진공학회논문집
• /
• 제22권4호
• /
• pp.245-251
• /
• 2018

In this paper, we address some issues in existing seismic hazard closed-form equations and present a novel seismic hazard equation form to overcome these issues. The presented equation form is based on higher-order polynomials, which can well describe the seismic hazard information with relatively high non-linearity. The accuracy of the proposed form is illustrated not only in the seismic hazard data itself but also in estimating the annual probability of failure (APF) of the structural systems. For this purpose, the information on seismic hazard is used in representative areas of the United States (West : Los Angeles, Central : Memphis and Kansas, East : Charleston). Examples regarding the APF estimation are the analyses of existing platform structure and nuclear power plant problems. As a result of the numerical example analyses, it is confirmed that the higher-order-polynomial-based hazard form presented in this paper could predict the APF values of the two example structure systems as well as the given seismic hazard data relatively accurately compared with the existing closed-form hazard equations. Therefore, in the future, it is expected that we can derive a new improved APF function by combining the proposed hazard formula with the existing fragility equation.

• 대한조선학회논문집
• /
• 제54권5호
• /
• pp.430-438
• /
• 2017

This study presents the reliability-based flaw assessment for the crack in the mooring chain of a floating type offshore structure. BSI(British Standard Institution) flaw assessment procedure BS7910 was combined with first- and second-order reliability method (FORM, SORM) so that the acceptance of a given flaw can be assessed considering the uncertainties of parameters that play important role in the flaw assessment. Considering the probabilistic nature of the crack size and long-term distribution of the stresses acting on the crack in mooring chain, the failure probability was calculated using FORM and SORM. To check the validity of the FORM and SORM, Monte Carlo simulation was also carried out to derive the true limit state function and compared with the results of FORM and SORM.

• International Journal of Concrete Structures and Materials
• /
• 제9권1호
• /
• pp.21-33
• /
• 2015

This study aimed to present a reinforced concrete block system that reduces the flange thickness of the existing form block used in new buildings and optimizes the web form, and can thus capable of being used in the seismic retrofit of new and existing buildings. By conducting a compression test and finite element analysis based on the block and grouted concrete strength, it attempted to determine the compression capacity of the form block that can be used in new construction and seismic retrofit. As a result, the comparison of the strength equation from Architectural Institute of Japan to the prism compression test showed that the mortar coefficient of 0.55 was suitable instead of 0.75 recommended in the equation. The stress-strain relation of the block was proposed as a bi-linear model based on the compression test result of the single form block. Using the proposed model, finite element analysis was conducted on the prism specimens, and it was shown that the proposed model predicted the compression behavior of the form block appropriately.

• Design & Manufacturing
• /
• 제17권2호
• /
• pp.15-21
• /
• 2023

In this study, a diamond turning machine and a laser-assisted machining module were utilized for the complex combined cutting of aspheric shapes and fine patterns on the surface of high-hardness brittle material, silicon. The analysis of material's form accuracy and corrective machining was conducted based on key factors such as laser output, rotational speed, feed rate, and cutting depth to achieve form accuracy below 1 ㎛ and surface roughness below 0.1 ㎛. The cutting condition and corrective machining methods were investigated to achieve the desired form accuracy and surface roughness. The rotational speed of the spindle and the linear feed rate of the diamond turning machine were varied in five stages for the cutting condition test. Surface roughness and form accuracy were measured using both a contact surface profilometer and a non-contact surface profilometer. The experimental results revealed a tendency of improved surface roughness with increased rotational speed of the workpiece, and the best surface roughness and form accuracy were observed at a feed rate of 5 mm/min. Furthermore, based on the cutting condition experiments, corrective machining was performed. The experimental results demonstrated an improvement in form accuracy from 0.94 ㎛ to 0.31 ㎛ and a significant reduction in the average value of the surface roughness curve from 0.234 ㎛ to 0.061 ㎛. This research serves as a foundation for future studies focusing on the machinability in relation to laser output parameters.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권4호
• /
• pp.432-438
• /
• 2002

In this paper, we described a technique for the swing-up control of a 2 link acrobat robot using a cannonical form which is derived form the law of conservation of an angular momentum based on the center of the first joint. The wide usefulness of the canonical form of the acrobat robot, which was suggested here, is could also be applied to control a free flying robot or an underactuated planar manipulator with no gravity term. Some simulation results are provided to verify the effectiveness of the proposed algorithm

• 품질경영학회지
• /
• 제22권3호
• /
• pp.85-98
• /
• 1994

In current coordinate measuring machine practice, there are no commonly accepted sample sizes for estimating form errors which have a statistical confidence. Practically, sample size planning is important for the geometrical tolerance inspection using a coordinate measuring machine. We determine and validate appropriate sample sizes for form error estimation. Also, we develop form error estimation methods with certain confidence levels based on the obtained sample sizes in various form errors: straightness, flatness, circularity, and cylindericity.

• 한국멀티미디어학회논문지
• /
• 제6권4호
• /
• pp.565-575
• /
• 2003

This paper proposed context based annotation model and annotation ambiguity correction methods. The proposed model provides various annotation types, semantic models, and pen-based free drawing interface. Annotation correction method that is specifically based on the context which includes various textual and structure information between free-form marking and annotation. Also, interface for XML environment using the proposed model and correction methods is proposed and possibilities of application is looked at. The results from the implementation of the proposed method show that the annotated areas included in the free-form marking information are more accurate, achieving more accurate exchange results amongst multiple users in a heterogeneous document environment

• 한국컴퓨터정보학회논문지
• /
• 제11권4호
• /
• pp.87-96
• /
• 2006

바이트코드는 많은 장점을 가지고 있으나 수행 속도가 느리고 프로그램의 분석과 최적화에 알맞은 표현은 아니다. 분석과 최적화를 위하여 바이트코드를 정적 단일 배정문(SSA Form)으로 변환이 수행되어야 한다. 그러나 바이트코드에서 SSA Form으로 변환 시 어떤 변수는 타입 정보를 상실한다. 이를 해결하기 위하여 본 논문에서는 바이트코드에 대한 확장된 제어 흐름 그래프를 생성한다. 또한 정적으로 분석하기 위해 제어 흐름 그래프를 SSA Form으로 변환한다. SSA Form으로 변환을 위하여 지배자. 직접 지배자. 지배자 경계. ${\phi}$-함수, 재명명 등 많은 정보에 대한 계산을 수행한다. 생성된 SSA Form에 알맞은 타입을 선언하기 위해서 다음과 같은 동작들을 수행한다. 먼저 클래스의 호출그래프와 상속 그래프를 생성한다. 그리고 각 노드에 대한 정보를 수집한다. 수집된 정보를 기반으로 동등한 타입의 노드를 찾고 강 결합 요소로 설정한 후 각 노드에 타입을 효율적으로 설정하는 방법을 제안하였다.

• Journal of Computing Science and Engineering
• /
• 제2권3호
• /
• pp.301-320
• /
• 2008

Partial redundancy elimination (PRE) is an interesting compiler optimization because of its effectiveness and generality. Among many PRE algorithms, the one in static single assignment form (SSAPRE) has benefits over other bit-vector-based PRE algorithms. It preserves the properties of the SSA form after PRE and exploits the sparsity of the SSA form, resulting in reduced analysis and optimization time. This paper presents a practical improvement of the SSAPRE algorithm that further reduces the analysis and optimization time. The underlying idea is removing unnecessary ${\Phi}$'s during the ${\Phi}$-Insertion phase that is the first step of SSAPRE. We classify the expressions into three categories: confined expressions, local expressions, and the others. We show that unnecessary ${\Phi}$'s for confined and local expressions can be easily detected and removed. We implement our locality-based SSAPRE algorithm in a C compiler and evaluate its effectiveness with 20 applications from SPEC benchmark suites. In our measurements, on average 91 of ${\Phi}$'s identified by the original demand-driven SSAPRE algorithm are unnecessary for PRE. Pruning these unnecessary ${\Phi}$'s in the ${\Phi}$-Insertion phase makes our locality-based SSAPRE algorithm 1.8 times faster, on average, than the original SSAPRE algorithm.