• Kyungpook Mathematical Journal
• /
• 제56권3호
• /
• pp.1017-1045
• /
• 2016

Using a combination of calculational and theoretical approaches, we establish results that relate two knot invariants, the Alexander polynomial, and the number of quandle colourings using any finite linear Alexander quandle. Given such a quandle, specified by two coprime integers n and m, the number of colourings of a knot diagram is given by counting the solutions of a matrix equation of the form AX = 0 mod n, where A is the m-dependent colouring matrix. We devised an algorithm to reduce A to echelon form, and applied this to the colouring matrices for all prime knots with up to 10 crossings, finding just three distinct reduced types. For two of these types, both upper triangular, we found general formulae for the number of colourings. This enables us to prove that in some cases the number of such quandle colourings cannot distinguish knots with the same Alexander polynomial, whilst in other cases knots with the same Alexander polynomial can be distinguished by colourings with a specific quandle. When two knots have different Alexander polynomials, and their reduced colouring matrices are upper triangular, we find a specific quandle for which we prove that it distinguishes them by colourings.

• Advances in concrete construction
• /
• 제15권1호
• /
• pp.63-74
• /
• 2023

All production and consumption activities produce wastes, which often cause damage to our environment and multiple risks to the human health. The valorization of these wastes in concrete technology is a future solution that will allow finding other construction materials sources, optimizing energy consumption and protecting the environment. Among these wastes, there is the marble waste. Every year, huge amount of marble waste is discarded as dust or aggregates form, in open-air storage areas causing serious problems for the environment and public health. In this context, the incorporation of marble waste as a replacement of ordinary aggregates or cement in concrete composition is actively investigated by researchers. This paper presents a comprehensive review of published studies over the last 20 years, dealing the effect of marble waste on fresh and hardened properties of concrete. Most of the studies carried out have used marble waste as dust with substitution rates between 5 and 20%. Besides the economic and ecological benefits, this review showed that marble waste can improve the physical, mechanical and durability properties of concrete. This improvement depends on the form (dust, fine aggregate or coarse aggregate), substitution method (as cement or aggregates replacement) and substitution rate of marble waste. Additionally, the review results showed that the use of 10-15% of marble waste dust as cement substitution can lead to increase the compressive strength.

• 국제학술발표논문집
• /
• The 4th International Conference on Construction Engineering and Project Management Organized by the University of New South Wales
• /
• pp.58-65
• /
• 2011

Construction Productivity is one of the most important elements in construction management. It is used in construction process scheduling and cost management, which are significant sector in construction management. It is important to make appropriate schedule and monitor how works are done within schedule. But construction project contains uncertainty and inexactitude, modifying construction schedule is being an issue to manage construction works well. Even though prediction and monitoring of productivity can be principal activity, it is hard to predict productivity with manager's experience and a standard of estimate. A large number of factors influencing productivity, such as drawing, construction method, weather, labor, material, equipment, etc. But current calculation of productivity depends on empirical probability, not consider difference of each influencing factor. In this research, the aim is to present a productivity predicting regression model of form work, which includes effectiveness of influences factors. 5 variables existed inside form work are selected by interview and site research based on literature review of existed various productivity influencing factors. The effectiveness and correlation of productivity influencing factors are analyzed by statistical approach, and it is used to make productivity regression model. The finding of this research will improves monitoring and controlling of project schedule in construction phase.

• 대한한의학원전학회지
• /
• 제22권3호
• /
• pp.31-51
• /
• 2009

The characteristics of Jin's ideas on clinic theory can be arranged as follows. 1. Jin emphasized warming and tonifying[溫補] in treatment and the part that shows this the best is the taking care of[調理] the Vital gate[命門], kidney, liver, and spleen. His ideas were based on his understanding of a human life's origin, and was influenced by Seolgi(薛己), Joheon-ga(趙獻可) and Janggaebin(張介賓)'s Vital gate and source Gi theory(元氣說) so scholastically, he has that in common with them but was later criticized by later doctors such as Oksamjon(玉三尊) as an 'literary doctor(文字醫)' who followed the ideas of "Uigwan(醫貫)". 2. The warming and tonifying school[溫補學派], who were influenced by Taoism, said in their theory of disease outbreak[發病學說] that since one must not hurt one's Yin essence and Yang fire [陰精陽火] there is more deficiency than excess, so that was why they used tonifying methods. Jin was also like them and this point of view is universal in internal medicine, gynecology, pediatric medicine and surgery and so on. 3. Jin, who saw the negative form of pulse diagnosis[診脈] emphasized following symptoms over pulse diagnosis using the spirit of ‘finding truth based on truth[實事求是]' in "Maekgyeolcheonmi(脈訣闡微)", but emphasized 'the combination of pulse and symptoms[脈證合參]'. He understood pulse diagnosis as a defining tool for symptoms, and in "Seoksilbirok(石室秘錄)" simplified pulse diagnosis into 10 methods : floating/sunken(浮沉), slow/fast(遲數), large/fine(大小), vacuous/replete(虛實) and slippery/rough(滑澀). 4. Jin used 'large formulas(大方)' a lot that usually featured a large dose, and in " Bonchosinpyeon(本草新編)" he thought of the seven formulas(七方) and ten preparations(十劑) as the standard when using medicine. He did away with old customs and presented a 'new(新)' and 'extra(奇)' point of view. He especially used a lot of Insam(人蔘) when tonifying Gi and Geumeunhwa(金銀花) when treating sores and ulcers. 5. In the area of surgery Jin gave priority to the early finding and treatment of disease with internal treatment[內治] and was against the overuse of acupuncture. However records of surgical measures in a special situation like lung abscesses(肺癰) and liver abscesses(肝癰), and anesthetic measures using 'Manghyeongju(忘形酒)' and 'Singoiyak(神膏異藥)' and opening the abdomen or skull, and organ transplants using a dog's tongue are important data. 6. Jin stated the diseases of Gi and blood broadly. Especially in the principles of treating blood, blood diseases had to be forwarded[順] and Gi regulation[理氣] was the number one priority and stated the following two treatments. First, in "Jeonggiinhyeolpyeon(精氣引血篇)" of volume 6 of "Oegyeongmieon(外經微言)", for the rules for treating blood he stated the pattern identification of finding Gi in blood and blood in Gi. Second, he emphasized Gi regulation(理氣) in blood diseases and stated that the Gi must be tonifyed after finding the source of the loss of blood.

• 한국안전학회지
• /
• 제17권1호
• /
• pp.87-93
• /
• 2002

In this thesis using FTA technique, the author proposes a new method of analysis of some accidents in construction work. Some efficient plans of safe facility investment are made out. For this study, I referred to 'The Death Accident in Construction Works', which have been published by Korea Industrial Safety Corporation from 1993 to 1999 for 6 years. I selected some of apartment constructions which have caused many deaths for the purpose of analysis in the study. I found that the concrete work using ferro-deck takes more deaths than the conventional construction. After finding this, I selected GANG FORM works using ferro-concrete which is the most widely used but causes many accidents. On the basis of the classification, I try to do some quantitative analyses by adding the death frequency and material factors. In order to draw up the most efficient investment plan, it is imperative that FT diagram be made out and that factors. In order to draw up the most efficient investment plan, it is imperative that FT diagram be made out and that minimal Cut Set be needed. It requires a great deal to labor and time to get Minimal Cut Set. The Minimal Cut Set which is formed of these process is the main factor to analyze disaster in the work. It is desirable that we add calculated percentage of accidents to these factors to these factors in value order, that is to say, from the high cost to low cost.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.16.1-16.1
• /
• 2011

$TiO_2$ is a promising material for gas sensors. To achieve high sensitivities, the material should exhibit a large surface-to-volume ratio and possess the high accessibility of the gas molecules to the surface. Accordingly, a wide variety of porous $TiO_2$ nanomaterials synthesized by wet-chemical methods have been reported for gas sensor applications. Nonetheless, achieving the large-area uniformity and comparability with well-established semiconductor production processes of the methods is still challenging. An alternative method is soft-templating which utilizes nanostructured inorganic or organic materials as sacrificial templates for the preparation of porous materials. Fabrication of macroporous $TiO_2$ films and hollow $TiO_2$ tubes by soft-templating and their gas sensing applications have been reported recently. In these porous materials composed of assemblies of individual micro/nanostructures, the form of links or necks between individual micro/nanostructures is a critical factor to determine gas sensing properties of the material. However, a systematic study to clarify the role of links between individual micro/nanostructures in gas sensing properties of a porous metal oxide matrix is thoroughly lacking. In this work, we have demonstrated a fabrication method to prepare highly-ordered, embossed $TiO_2$ films composed of anatase $TiO_2$ hollow hemispheres via soft-templating using polystyrene beads. The form of links between hollow hemispheres could be controlled by $O_2$ plasma etching on the bead templates. This approach reveals the strong correlation of gas sensitivity with the form of the links. Our experimental results highlight that not only the surface-to-volume ratio of an ensemble material composed of individual micro/nanostructures but also the links between individual micro/nanostructures play a critical role in evaluating the sensing properties of the material. In addition to this general finding, the facileness, large-scale productivity, and compatability with semiconductor production process of the proposed fabrication method promise applications of the embossed $TiO_2$ films to high-quality sensors.

• 한국수학사학회지
• /
• 제21권3호
• /
• pp.97-112
• /
• 2008

이 연구에서는 한국어 수사 하나, 둘, ..., 열의 어원에 대한 현재까지의 연구 결과를 수학사적인 관점에서 비판적으로 조망했다. 수학사적인 관점에서 보면, 하나, 둘, 셋의 어원을 찾는 일은 사실상 가능해 보이지 않는다. 셋과 넷, 넷과 다섯 사이에는 단절이 있었을 가능성이 있다. 하나, 둘, 셋, 넷의 어원은 다섯, 여섯, ..., 열의 어원과는 다른 측면에서 찾아야 할 것이다. 여섯과 일곱 사이에 단절이 있었을 가능성이 있다. 일곱, 여덟, 아홉의 조어 메커니즘은 동일할지 모른다. 아홉과 열 사이에 단절이 있었을 가능성이 있다. 현재까지의 연구에서는 이러한 단절에 충분히 주목하지 않고 있으나, 수학사에 따르면 수사의 발달에는 여러 번의 단절이 존재 했다.

• 한국공간구조학회논문집
• /
• 제7권2호
• /
• pp.115-124
• /
• 2007

막 구조물을 설계하기 위해서는 우선 초기장력 도입으로 인한 구조물의 형상을 정확히 알아야 한다. 이를 위해서 모형을 통한 모델링이나 컴퓨터를 이용한 형상해석이 요구되며, 초기장력의 도입으로 형성되는 막 구조물의 곡면은 일반적으로 등장력 곡면이다. 이와 같은 특성을 가진 막 구조물은 모형만을 대상으로 형상을 구할 때에는 정량적으로 형상의 정보를 얻기가 힘들고, 형상해석만을 수행한 경우는 예기치 않은 문제가 발생하기도 한다. 또 설계자의 의도에 따른 형상은 실질적으로 등장력 곡면에 부합되지 않는 경우가 많고, 심지어 실현 불가능한 발생한다. 따라서 설계프로세스에 따른 구조물의 형상에 부합되면서 실현가능한 형상으로의 초기형상 결정과정은 막 구조물의 설계에 있어서 무엇보다 중요한 과정이다. 본 연구에서는 건축 설계프로세스에 따른 모델링과 수치적 형상해석과의 결과에 대한 차이를 살펴보고 피드벡 과정을 통하여 막 구조물의 초기형상을 결정하는 프로세스에 대해서 연구한다.

• 한국동물위생학회지
• /
• 제44권4호
• /
• pp.185-194
• /
• 2021

Polyglutamine extension in the coding sequence of mutant huntingtin causes neuronal degeneration associated with the formation of insoluble polyglutamine aggregates in Huntington's disease (HD). Mutant huntingtin can form aggregates within the nucleus and processes of neurons possibly due to misfolding of the proteins. To better understand the mechanism by which an elongated polyglutamine causes aggregates, we have developed an in vitro binding assay system of polyglutamine tract from truncated huntingtin. We made GST-HD exon1 fusion proteins which have expanded polyglutamine epitopes (e.g., 17, 23, 32, 46, 60, 78, 81, and 94 CAG repeats). In the present emergence of new study adjusted nanotechnology on protein chip such as surface plasmon resonance strategy which used to determine the substance which protein binds in drug discovery platform is worth to understand better neurodegenerative diseases (i.e., Alzheimer disease, Parkinson disease and Huntington disease) and its pathogenesis along with development of therapeutic measures. Hence, we used strengths of surface plasmon resonance (SPR) technology which is enabled to examine binding specificity and explore targeted molecular epitope using its electron charged wave pattern in HD pathogenesis utilize conjugated mutant epitope of HD protein and its interaction whether wild type GST-HD interacts with mutant GST-HD with maximum binding affinity at pH 6.85. We found that the maximum binding affinity of GST-HD17 with GST-HD81 was higher than the binding affinities of GST-HD17 with other mutant GST-HD constructs. Furthermore, our finding illustrated that the mutant form of GST-HD60 showed a stronger binding to GST-HD23 or GST-HD17 than GST-HD60 or GST-HD81. These results indicate that the binding affinity of mutant huntingtin does not correlate with the length of polyglutamine. It suggests that the aggregation of an expanded polyglutamine might have easily occurred in the presence of wild type form of huntingtin.

• 한국항만경제학회지
• /
• 제36권1호
• /
• pp.59-76
• /
• 2020

본 연구는 중고선박 매매계약 체결 시 사용되는 계약사의 주요 선택기준에 대한 요인을 분석하여 상황별 합리적인 계약의 선정에 도움을 주고자 분석한 것이다. 선박 매매 양식의 여러 선정요인 가운데 우선적으로 고려해야 하는 요인을 파악하기 위해서 선박매매를 담당하는 전문가와 선사의 담당자와 인터뷰를 통하여 세부요인을 추출한 다음 AHP분석을 실시하였다. AHP분석을 위해서 3가지 요인을 Level 1로 하였으며, 각 상위계층에 5가지의 하위 세부요인을 Level 2로 구성하여 전무가 집단의 설문조사를 통해 종합 중요도 순위를 분석하였고, 두 개의 계약양식의 선정기준으로 요인을 비교분석하였다. 본 연구의 결과, 첫째, 계약 양식의 선정요인에서 계약의 유지능력, 인도장소와 시점, 내용의 완결성 등이 가장 중요한 요소이며, 둘째, 계약양식의 선정과정에서 양자 요인을 비교한 결과, 지정권자의 지위와 인도장소와 시점의 경우 양자의 선호도의 큰 차이는 없었다. 그러나 내용의 완결성, Payment & Deposit, 최신 거래의 흐름 반영, 지역적 요인 등의 나머지 요인은 NIPPON1999의 28.5%에 비해 NSF가 약 70% 이상의 높은 선호도를 보였다. 따라서 이러한 결과를 인식하여 선박매매 당사자가 상황에 맞게 계약서를 작성하고 두 계약양식의 차이점을 명확히 인지하고 보다 합리적인 조항을 선택함으로써 분쟁을 예방하는 것이 중요하다.