• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.781-785
• /
• 2005

Cutting forces and tool deflection in end milling are represented as the closed form of tool rotational angle and cutting conditions. The discrete cutting forces caused by tool entry and exit are continued using the Fourier series expansion. Tool deflection is predicted by direct integration of the distributed loads on cutting edges. Cutting conditions, tool geometry, run-outs and the stiffness of tool clamping pan are considered for cutting forces and tool deflection estimation. Compared to numerical methods, the presented method has advantages in short prediction time and the effects of feeding and run-outs on cutting forces and tool deflection can be analyzed quantitatively. This research can be effectively used in real time machining error estimation and cutting condition selection for error minimization since the ferm accuracy is easily predicted by tool deflect ion curve.

• Journal of Positioning, Navigation, and Timing
• /
• 제10권4호
• /
• pp.341-351
• /
• 2021

In this paper, a GNSS error generation simulator for Signal Quality Monitoring (SQM) is implemented by using Matlab based on mathematical models derived from the effect of GNSS signal and measurement errors. The GNSS signal measurement errors of interest in this paper include three cases such as Evil Wave Form (EWF), Multipath (MP) and Radio Frequency Interference (RFI). In order to verify the validity of the generated measurement errors, a simple form of metrics for detecting and monitoring GNSS errors is included in the simulator. The GNSS errors generated by the simulator are added to the GNSS measurement data from commercial GNSS receiver in real time, and then, the SQM is tested for various scenarios of each case configured by scenario setting of the user.

• 한국정보통신학회논문지
• /
• 제15권2호
• /
• pp.279-285
• /
• 2011

차세대 무선통신에서는 현재 서비스 되고 있는 성능보다 높은 BER(Bit Error Rate)의 성능을 요구한다. 기존의 DVB-RCS(Digital Video Broadcasting - Return Channel via Satellite)에서 사용중인 이진 터보 코드(Double binary Turbo code)는 높은 SNR(에서 오류마루 현상이 발생하여 차세대 무선통신에서 사용하기가 어려움이 있다. 따라서 본 논문에서는 DVB-RCS NG에 적합한 부호화 방식으로 3D-터보 코드(Tthird-dimension Turbo code)의 부복호화기의 구조를 분석하고 성능분석 하였다. 3D-터보 코드는 기존의 DVB-RCS 방식에 rate-1인 post-encoder를 첨가시켜 오류마루 현상을 보완한 부호화기이다. 3D-터보 코드는 post-encoder의 형태, 인터리빙 기법, ${\lambda}$값의 변화에 따라 성능이 달라지므로 본 논문에서는 각 파라메타에 대한 최적의 값을 제시하였다. 전체적으로 3D-터보 코드가 기존의 DVB-RCS 터보 코드에 비해 성능이 우수하고 기존의 문제점인 오류마루 현상을 해결할 수 있음을 알 수 있다.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제4권12호
• /
• pp.399-408
• /
• 2015

직사화기 사격통제장치에서 최적 설계를 위해서는 특정 오차요소가 명중률에 미치는 영향을 파악해야 한다. 이를 위해 가장 좋은 방법은 이들 오차요소에 대한 민감도 식을 구하는 것이나, 체계가 복잡하면 이를 정량적으로 유도하기가 쉽지 않다. 보통 제한된 운용조건에 대해 수치방법으로 민감도를 계산하며, 지상전투차량 등에서 널리 활용되고 있다. 그러나 이 방법은 다량의 시뮬레이션에 의존해야 하므로, 연산 시간이 많이 소요되고 데이터에 의존하므로, 대공화기와 같이 운용조건이 넓게 변화할 경우 민감도가 어떻게 변화할지 직관적으로 이해하는 데 어려움이 있다. 본 논문은 직사화기 탄도에 대한 닫힌 형태 탄도식을 유도하고, 이 식으로부터 오차요소별로 체계 종합오차에 대한 민감도 식을 유도하고, 이들의 영향을 종합하여 명중률을 계산하는 방법을 보인다. 유도된 민감도 식은 수치적분 방법과 달리 연산처리 시간이 짧으면서도 관련 변수 간 물리적 이해가 쉬워 체계설계 시 다양한 운용조건에 대해 편리하게 활용될 수가 있다. 30미리 탄에 대한 시뮬레이션을 통해 본 논문의 유용성을 보인다.

• 한국임상약학회지
• /
• 제18권1호
• /
• pp.1-5
• /
• 2008

The goal of this research was to find out the effect of dispensing error prevention program on the incidence of the error in a university hospital pharmacy in Daegu. Dispensing error in this research was defined as the error identified during double-checking process, so it does not mean that the wrong dispensing was administered to patient. Drug name error was the most frequently found error, accounting for about one third of all dispensing errors, and was followed by counting error, strength error, dosage form error, and others. Similar drug name was identified as the most frequent reason for the error, taking up about two thirds of all drug name errors. In this research, six months of dispensing error prevention program resulted in statistically significant reduction of dispensing error by 42 percent. Therefore, it is recommended that hospital pharmacy implement such prevention program regularly to reduce the incidence of the error. Finally, it appears that drug approval authority should closely check the similar drug names and have power to command pharmaceutical company to change the name if pertinent.

• 한국통신학회논문지
• /
• 제34권4C호
• /
• pp.469-475
• /
• 2009

Chirp 확산 대역에서 (chirp spread spectrum: CSS) 데이터 전송량을 증가시키기 위해 사용되는 오버랩 기법은 인접 심벌 간 간섭을 (intersymbol interference: ISI) 유발하여 심각한 비트 오류율 (bit error rate: BER) 성능 저하를 초래한다. 따라서 효과적으로 오버랩 기법을 사용하기 위해서는 요구되는 BER 성능 기준에 따라 적절한 횟수로 오버랩을 실시하여야 한다. 본 논문에서는 근사화 된 가우시안 Q 함수를 바탕으로 오버랩 횟수를 매개변수로 가지는 오버랩 기법이 적용된 CSS 시스템의 닫힌꼴 BER 성능 수식을 유도한다. 유도한 닫힌꼴 BER 성능 수식의 정확성은 모의실험 결과와의 비교를 통하여 검증한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권6호
• /
• pp.1606-1626
• /
• 2012

This paper investigates the performance of an amplify-and-forward (AF) two-way relaying system with antenna correlation. The system consists of two multiple-antenna sources, which exchange information via the aid of a single-antenna relay. In particular, we derive the exact outage probability expression. Furthermore, we provide a simple, tight closed-form lower bound for the outage probability. Based on the lower bound, we obtain the closed-form asymptotic outage probability and the average symbol error rate expressions at high signal-to-noise ratio (SNR), which reveal the system's diversity order and coding gain with antenna correlation. To investigate the system's throughput performance with antenna correlation, we also derive a closed-form lower bound for the average sum-rate, which is quite tight from medium to high SNR regime. The analytical results readily enable us to obtain insight into the effect of antenna correlation on the system's performance. Extensive Monte Carlo simulations are conducted to verify the analytical results.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.213-214
• /
• 2023

Positioning information of workers is important for safety management at construction sites. Among the various indoor positioning technologies, geomagnetic fields-based technology is more economical and has less error than other technologies. However, there is a problem that the installation and dismantling of materials such as formwork at construction sites can cause degradation in positioning performance. Therefore, in this study, the distortion of the geomagnetic field near euro-form was quantitatively measured and the application method of geomagnetic field-based indoor positioning technology on formwork stage was presented. The results showed that the distortion occurred within 10cm of the wall and column form, but positioning accuracy could be affected up to 60cm from the form due to the characteristic of geomagnetic field-collecting technology. Therefore, applying this technology to the formwork stage requires complementary measures, such as using other positioning techniques up to 60 cm near the formwork, or excluding distorted area when positioning. It is expected that this study can contribute to the efficient safety management of workers by suggesting ways to prevent an increase in positioning error when applying geomagnetic field sequence-based indoor positioning technology during the formwork stage.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.6-7
• /
• 2021

Although the development of free-form architectural technology continues, it consumes a lot of money and time due to the one-time formwork and the difficulty of maintaining quality due to manual work. To this end, in this study, a shape connection technique was proposed and verified to improve the limitations of implementing the curved surface of the existing lower multi-point press. In order to improve the accuracy of the shape, a curved surface was implemented using a silicon cap and a silicon plate. As a result of the error analysis of the shape, a small value of less than 3 mm was found. This study can implement more accurate curved surfaces than conventional technologies and produce high-quality free-form panels.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 추계학술대회 논문집
• /
• pp.204-209
• /
• 1998

The acceleration of the performance of machine tools influences the development of the semi-conductor and optical technology as the development of NC and measurement technology. We can mention that a traction role of the acceleration for the development like that depends on the development of the measurement technics Stylus instrument method, STM, SEM, Laser interferometer method which are used for measuring the quasi-static error of machine tools. Because the measurement has been done to unload condition without considering of mechanical stiffness in the case of machining center as we measure the quasi-static error of machine tools on general studies, people who works on the spot has many problems on the data value. Therefor we will help working more accurately on the spot by measuring, analyzing, displaying the deflection of the table and support shaft when we load on the table and the support shaft of machining center using laser interferometer. Also we try to settle new conception of the measurement method and more accurate grasp of the deflection tendency by verifing the tendency of the error measured through the comparison of the simulated error using ANSYS, a common finite element analysis program, which is able to measure heat deformation, material deformation, and error resulted form this study.