• 전자공학회논문지A
• /
• 제33A권4호
• /
• pp.84-91
• /
• 1996

Input filter for satellite communication transponder is the interface between the antenna and the receiver. It is used to provide the selection of the uplink signals with minimum insertion loss and to prevent downlink signals form reaching the LNA. This paper is intended to provide a description of the input filter for KOREASAT communication transponder. Included are description for the electrical and mechanical design and the requirments of environmental test. In expecting the electrical performine the optimum electrical configuration ot meet all requirements are performed. Mechanical requirements are charactersed by several constraints for weight, size of the filter and its type of input output interface. The standardized environmental tests are performed to confirm satisfactory performance of the filter with respect to the requirements of vibration and thermal vacuum shocks.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.566-569
• /
• 2013

The purpose of this research is to develop the technology to meet the requirements of the design content, and to build a 'Requirement Information Management Model' for the design project. The model that should be used in the early design stage will undergo the following process: First, basic requirements would be defined by extracting the design content in the form of a reusable library of space units. At the next stage, requirement information should be modified after considering unique characteristics for the project and conflict problems between function and performance.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.195-196
• /
• 2014

Unlike general construction works, bridge construction is mostly done in a high place. The conventional deck form of bridge is installed between precast concrete girders using sleepers, bridging joints and plywoods, and after concrete is poured to the deck, the form materials are removed at high altitudes. When removing the form, it may be dropped on ground, damaging the materials and resulting in economic loss. In addition, safety accidents are likely as the works are performed in a high place, and as the manpower increases, the cost increases. Also, it is difficult to install and remove temporary equipment. Therefore, it is required to develop a system form that allows easier and quicker installation and removal by unskilled workers and ensures safety of workers. In this regard, the study is intended to analyze requirements for the system form for pouring concrete to bridge decks, which can be easily installed and removed. The study result will be used as basic information for development of the system form for pouring concrete to bridge decks.

• Asia pacific journal of information systems
• /
• 제5권2호
• /
• pp.101-129
• /
• 1995

This paper proposes a form-based distributed database design methodology ($FD^3$). The methodology consists of five design phases such as (i) form requirement analysis (ii) schema integration (iii) distribution analysis (iv) distribution design, and (v) local logical/physical design. In the $FD^3$, all the important design information for each phase is obtained by using an organizations forms, Users requirements are analyzed by using forms that contain logical and quantitative information for distribution design. $FD^3$ resolves naming conflicts by employing SQLs based on the form field data in the schema integration phase. Furthermore, $FD^3$ enhances the quality of distributed database design by incorporating communication costs into the design model. A real-life case is illustrated to demonstrate the usefulness of the $FD^3$.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.165-166
• /
• 2023

Free-form Concrete Panel(FCP) is each panel that composes the concrete exterior skin of Free-form building. FCPs contain curved surfaces, and FCPs have different curvature, size, and angles. In order to manufacture FCP, high technology is required, and it is currently difficult to manufacture it according to the design shape. In particular, many errors occur in the side shape of FCP. This is because when the side silicone mold is applied, it is installed without a coupling method between molds and support device. In this study, basic research was conducted to develop a side silicone mold support device to solve the above problems. We classified the required performance and derived the detailed requirements. Also, Based on this, we drew the basic design of the support device. We plans to conduct design improvement, mock-up making, and FCP manufacturing experiments through future research.

• 대한조선학회지
• /
• 제19권4호
• /
• pp.31-37
• /
• 1982

Developing a minimum wave resistance hull form which is satisfying the given requirements such as displacement and speed is one of the important problems in ship hydrodynamics. The theoretical approach conducted by Pien was successful in developing an optimized hull form, however, which can not be applied directly to practical hull form without manual lines fairing process. To avoid this difficulty, source distribution which arrived after the optimization was put into a fictitious restricted channel and as a result practicably modified hull form was derived by stream line tracing. The wave resistance of the hull thus obtained was calculated by solving the simplified integral equation suggested by Kan. The resistance at design point is almost same with that of the original hull which was represented by source distribution on the vertical rectangular center plane. It is therefore recommended to use the derived hull form for the hull which obtained after manual lines fairing process at Pienoid method. Further researches both in theory and experiment are necessary before this concept is put into practical application.

• 한국농촌건축학회논문집
• /
• 제14권1호
• /
• pp.99-106
• /
• 2012

Transformation which is the major damage factor of living space in folk village is caused by improvement behaviors reflecting real requirements of residents who are the subjects of life. Such a process changes traditional space structure gradually and lowers preservative value of folk village. Therefore this study examines transformational conditions of living space centering around changes of spatial components and plane forms through literature and field research and analyzes characteristics of transformational phenomenon. This study examined changes of components and transformation of Seongeup folk village. While main room plane was diversified by residents' requirements, it was not harmonized with traditional image of Seongeup folk village. Transformation of living space at Seongeup Folk Village was positive from the side of residents' living requirements, but negative in that it damaged unique identity of folk village. Accordingly, it is thought that deliberation considering residents' living requirements as the field of their life with maintenance of original form for the purpose of preserving folk village and professionals' support and legal study for revision of approval system are continuously required.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권8호
• /
• pp.4191-4211
• /
• 2019

Software product lines (SPLs) are complex software systems by nature due to their common reference architecture and interdependencies. Therefore, any form of evolution can lead to a more complex situation than a single system. On the other hand, software product lines are developed keeping long-term perspectives in mind, which are expected to have a considerable lifespan and a long-term investment. SPL development organizations need to consider software evolution in a systematic way due to their complexity and size. Addressing new user requirements over time is one of the most crucial factors in the successful implementation SPL. Thus, the addition of new requirements or the rapid context change is common in SPL products. To cope with rapid change several researchers have discussed the evolution of software product lines. However, for the evolution of an SPL, the literature did not present a systematic process that would define activities in such a way that would lead to the rapid evolution of software. Our study aims to provide a requirements-driven process that speeds up the requirements engineering process using social network sites in order to achieve rapid software evolution. We used classification, topic modeling, and sentiment extraction to elicit user requirements. Lastly, we conducted a case study on the smartwatch domain to validate our proposed approach. Our results show that users' opinions can contain useful information which can be used by software SPL organizations to evolve their products. Furthermore, our investigation results demonstrate that machine learning algorithms have the capacity to identify relevant information automatically.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.813-819
• /
• 2006

The state of the art for the design of swing ann actuators for optical disc drives is to obtain the high efficient dynamic characteristics, especially for the small size for the mobile information devices, It is affected by the need of consumers who wants the portable digital storage devices maintaining highly functional and removable characteristics of the optical disk drive (ODD). As a necessary consequence, the need of the small form factor (SFF) storage device has been considered as an important part in the information storage technology. In this paper. we suggest a new conceptual miniaturized swing arm type actuator that has high efficient dynamic characteristics as well as satisfies the sensitivity and the heat emission requirements for the SFF-ODD. It also uses a tracking electromagnetic (EM) circuit for a focusing motion. Due to the size constraint, the thermal problem of optical head arises; therefore, we design an efficiently heat emitted structure for the actuator.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 추계 학술논문 발표대회
• /
• pp.111-116
• /
• 2005

The formwork is very important in terms of time and cost of construction project. There have been ample research efforts regarding to technical issues such as types, specifications, and productivities. However, no previous research has addressed managerial requirements of the formwork. Thus, this paper investigated the present status of form work analyzing a case-study company, and derived an improvement plan for the formwork. The findings includes 1) the needs for increasing use of system forms in order to improve the quality and the safety and 2) further development of management system of formwork in order to enhance the efficiency.