• 한국건축시공학회지
• /
• 제10권3호
• /
• pp.57-64
• /
• 2010

본 연구는 알루미늄 거푸집 표면코팅재가 콘크리트 표면품질에 미치는 영향에 대하여 분석한 것이다. 콘크리트 표면형상에 미치는 알루미늄 거푸집 표면코팅재 변화의 영향에 따른 콘크리트 표면의 육안관찰시 전반적으로 전용횟수가 증가함에 따라 표면품질은 저하하는 것으로 나타났고, 치장합판(Plywood이하: PW)이 우수한 표면품질을 나타내었다. 에폭시(Epoxy :이하 EP) 수지의 경우는 박리제를 도포하였을 시 표면품질이 우수한 것으로 나타났다. 박리제 도포여부 및 전용횟수에 따른 콘크리트의 표면조도는 전용횟수가 증가함에 따라 가장 높은 표면조도 값을 나타내어 평활성이 불량한 것으로 나타났지만, EP와 PW의 표면조도 값은 가장 우수한 것으로 나타났다. 다만 EP의 경우는 박리제를 도포할 경우 표면조도 값이 낮게 나타났다. 박리제 도포여부 및 전용횟수에 따른 콘크리트의 공극갯수는 전반적으로 박리제를 도포할시 저감하는 것으로 나타났다.

• 한국건축시공학회지
• /
• 제13권5호
• /
• pp.457-464
• /
• 2013

Traditionally, the material used for the form in reinforced concrete construction has been wood or steel. But recently, aluminum forms have been widely used in wall structures such as apartment buildings. Aluminum is light, easy to handle, and economically advantageous, but the hydrogen gas created due to its reaction with the alkali component in concrete gives rise to air pockets on the concrete's surface, and deteriorates the surface's finishability. In this research, to determine the influence of aluminum material on concrete, the cement paste W/C and its chemical reactivity in alkali and acid solution were analyzed. As a prevention plan, the influence of the number of applications of calcium hydroxide and various surface coating materials was analyzed. Through the analysis, it was found that the surface voids on the aluminum form are the result of the reaction of hydrogen gas with an alkali such as $Ca(OH)_2$. This can be prevented by the surface treatment of $Ca(OH)_2$, separating material and coating material. However, poor surface form and damages to the form are expected to cause quality degradation because of the aluminum-concrete interaction. Therefore, thorough surface treatment, rather than the type of separating material or coating material, is considered the most important target of management.

• 대한기관윤리심의기구협의회지
• /
• 제1권2호
• /
• pp.30-42
• /
• 2019

In pharmaceutical clinical trials as human material research, the collection, use, storage and provision of human materials must be in accordance with the criteria stipulated in 「Bioethics and Safety Act」, except in the case that some criteria about it is in the law related to clinical trials such as 「Pharmaceutical Affairs Act」 and 「Enforcement Rule on Safety of Drugs, etc.」 so these take precedence over. Under 「Bioethics and Safety Act」, the core aspect of the legal standard for obtaining informed consent is the use of statutory form . The use of statutory form ensure that both those who obtain informed consent and those who give it can know the contents contained this form as well as recognize its importance. Thus, the person who has the right to informed consent can sign the statutory form after correct understanding of the contents. In reality, however, some researchers and IRB members determine that only the main informed consent form is to be used because most of contents on statutory from are included in the main informed consent form. Some other researchers and IRB members judge that the use of statutory form is not needed if human materials may only be used for laboratory testing and the rest will not be stored and provided for future use. Most of these determination and judgement is based on the interpretation of the Korea National Institute for Bioethics Policy(hereafter, KoNIBP) on IRB Information Portal Site. But, it is questionable whether the KoNIBP's interpretation is legally valid and the KoNIBP is the legal entity having authority to interpret existing statute. In some cased not only using the main informed consent form including enough information about the collection, use, storage and provision of human materials but also collecting necessary minimum human materials, and discarding the rest, unusing the statutory form may not cause the problem to respect and protect the research participant's rights. Therefore, the provision stipulating the criteria about the use of statutory form as the legal standard of obtaining informed consent that applies all human material research without exception should review to revise. At least, straighten out the confusion surrounding whether or not the statutory form is to be used, before the revision of related provision, considering the logical opinions of some researchers and IRB Members, the Ministry of Health and Welfare as the legal entity having authority to interpret existing statute should represent its opinion about permission of the acceptable exceptions.

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권4호
• /
• pp.57-63
• /
• 2003

Machining information such as form accuracy and surface roughness is an important factor for manufacturing precise parts. To this regard, OMM (On the Machine Measurement) has been researched for last several decades to alternate CMM (Coordinate Measurement Machine) process. In this research, the OMM system with a laser displacement sensor was developed for measuring form accuracy and surface roughness of the machined workpiece on the machine tool. The surface roughness was estimated comparing the sensory signal with the reference data measured from master specimen. Also, form accuracy was determined from the moving averaged raw data. In addition, the geometric error map constructed beforehand using the geometric errors of the machine tool was used to compensate the obtained form accuracy. The overall performance was compared with CMM result, and verified the feasibility of the measurement system.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.150-151
• /
• 2014

A mold of free-form concrete segment can be used only one time. Thus, the construction duration and cost are increased. The materials of the mold such as wood and metal have limitations due to the implementation and reuse. The review of the material of the mold for free-form concrete segment is needed to reduce duration and production cost. Phase change material can be used both to implement free-shape by heating and to produce mold after cooling. After using Phase change material can be re-used to mold by heating. The scope of this study is many kind of phase change materials for molding. The aim of this study is to analyze the phase change materials for production of changable mold for free-form concrete segment. In this study, the paraffin wax that is melted at 64℃ was selected by considering both the energy efficiency and the weather of Korea.

• 콘크리트학회논문집
• /
• 제18권1호
• /
• pp.73-82
• /
• 2006

최근까지의 거푸집 공법은 거푸집의 설치 및 탈형공정에 따른 공기연장, 인건비 상승에 따른 추가적인 비용소모, 거푸집 탈형후 발생되는 건설 폐자재로 인한 환경문제 유발 등의 직 간접적인 문제를 발생시켜 왔다. 따라서 본 연구에서는 이와 같은 문제점을 해결하고자 스테인레스 강섬유를 이용한 고성능 영구거푸집 공법에 대한 재료 및 구조적 거동특성을 분석하였다. 재료적 거동특성의 경우, 고성능 영구거푸집의 휨 거동에 있어 안정적인 연성거동 특성을 나타내었으며 후타설 콘크리트와의 부착성능도 우수한 것으로 나타났다. 구조적 거동특성의 경우, 고성능 영구거푸집의 압축단 및 인장단 거동특성이 분석되었으며 실험결과, 추가적인 보강성능 이외에 충분한 구조거동 특성을 발휘한 것으로 분석되었다.

• Structural Engineering and Mechanics
• /
• 제67권4호
• /
• pp.417-425
• /
• 2018

The main aim of this paper is to investigate the bending of Euler-Bernouilli nano-beams made of bi-directional functionally graded materials (BDFGMs) using Eringen's non-local elasticity theory in the integral form with compare the differential form. To the best of the researchers' knowledge, in the literature, there is no study carried out into integral form of Eringen's non-local elasticity theory for bending analysis of BDFGM Euler-Bernoulli nano-beams with arbitrary functions. Material properties of nano-beam are assumed to change along the thickness and length directions according to arbitrary function. The approximate analytical solutions to the bending analysis of the BDFG nano-beam are derived by using the Rayleigh-Ritz method. The differential form of Eringen's non-local elasticity theory reveals with increasing size effect parameter, the flexibility of the nano-beam decreases, that this is unreasonable. This problem has been resolved in the integral form of the Eringen's model. For all boundary conditions, it is clearly seen that the integral form of Eringen's model predicts the softening effect of the non-local parameter as expected. Finally, the effects of changes of some important parameters such as material length scale, BDFG index on the values of deflection of nano-beam are studied.

• 자연과학논문집
• /
• 제4권
• /
• pp.221-231
• /
• 1991

We have thought artistic charactics of modern form is abstract expression and purity and unity sight. Specially, modern sculpture form has strict geometrical form as showed in primitive art. In this circumstances, modern costume has stylized more artistic form in pure sight. Artistic characteristics showed in those collections are picturesque in material and sculpture in shillouette. Picturesque material pointed in decoretive function and simple shillouette pointed in sculpturesque body in modern costume.

• Design & Manufacturing
• /
• 제17권2호
• /
• pp.15-21
• /
• 2023

In this study, a diamond turning machine and a laser-assisted machining module were utilized for the complex combined cutting of aspheric shapes and fine patterns on the surface of high-hardness brittle material, silicon. The analysis of material's form accuracy and corrective machining was conducted based on key factors such as laser output, rotational speed, feed rate, and cutting depth to achieve form accuracy below 1 ㎛ and surface roughness below 0.1 ㎛. The cutting condition and corrective machining methods were investigated to achieve the desired form accuracy and surface roughness. The rotational speed of the spindle and the linear feed rate of the diamond turning machine were varied in five stages for the cutting condition test. Surface roughness and form accuracy were measured using both a contact surface profilometer and a non-contact surface profilometer. The experimental results revealed a tendency of improved surface roughness with increased rotational speed of the workpiece, and the best surface roughness and form accuracy were observed at a feed rate of 5 mm/min. Furthermore, based on the cutting condition experiments, corrective machining was performed. The experimental results demonstrated an improvement in form accuracy from 0.94 ㎛ to 0.31 ㎛ and a significant reduction in the average value of the surface roughness curve from 0.234 ㎛ to 0.061 ㎛. This research serves as a foundation for future studies focusing on the machinability in relation to laser output parameters.

• 한국가구학회지
• /
• 제12권1호
• /
• pp.69-79
• /
• 2001

The purpose of this study is to examine the characteristics of Arne Jacobsen's chair design. He was one of the few creators who inscribed his name in both the history of architecture and furniture design. His works reflected a form of "Regional Modernism" in which traditional techniques collide with functionalist beliefs. This grafting of ideas generated a person aesthetics which he used to establish a suitability of scale, detail an program for each design. In the material aspect, he had enjoyed using the plasticity of the plywood, polyurethane, tubular steel and in the formative aspect, organic form is combined with minimalization of material and simplicity. To sum up what is unique about Arne Jacobsen's chair design, it is that it is distinguished by a clear understanding and expression of beauty from nature, a complete understanding of the material used and the melding of traditional and functional techniques to generate organic form.anic form.