• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.57-60
• /
• 2003

The purpose of this study is to investigate the high temperature deformation behavior of Ti-6Al-4V alloy and to predict the final microstructure under given forming conditions. Equiaxed and widmanstatten of Ti-6Al-4V alloys were prepared as initial microstructure and the compression tests were performed to obtain the flow curves at high temperatures (700∼1100$^{\circ}C$) and various strain rates (10$\^$-4/∼10$^2$/s). Form the results of compression test various parameters such as strain rate sensitivity (m) and activation energy (Q) were calculated and used to establish constitutive equations. To predict the final microstructure after forming, finite element analysis was performed considering the microstructural parameters such as the grain size and the volume fraction of second phase.

• Korean Journal of Veterinary Service
• /
• v.46 no.3
• /
• pp.249-253
• /
• 2023

A 12-year-old neutered male Maltese was brought to our hospital with loss of appetite, generalized alopecia, anemia, and a palpable abdominal mass. Ultrasonography revealed multiple abdominal masses in the liver and spleen. Subsequently, splenectomy and liver biopsy were performed, and the masses were histologically diagnosed as metastatic fibrosarcomas of unknown primary origin. The owner refused further investigations such as computed tomography and hepatectomy, therefore, we decided to initiate chemotherapy in the form of metronomic therapy with toceranib phosphate, which has several advantages, such as better tolerability, low cost, and convenience. The size and number of hepatic fibrosarcomas continued to increase despite continued administration of toceranib (10 mg/dog, PO, q48h). The dog died approximately 43 days after initiation of the toceranib treatment. To the best of our knowledge, this is the first report on toceranib therapy for metastatic hepatic fibrosarcoma in a dog.

• Journal of Digital Convergence
• /
• v.16 no.9
• /
• pp.11-20
• /
• 2018

The Q&A board is widely used as a means of communicating service enquiries, and the need for efficient management of the enquiry system has risen because certain questions are being repeatedly and frequently registered. This study aims to construct a student-centered FAQ, centered on the unstructured data posted on the university homepage's Q&A board. We extracted major keywords from 690 postings registered in the recent 3 years, and conducted the semantic network analysis to find the relationship between the keywords and the centrality analysis in order to carry out network visualization. The most central keywords found through the analysis, in order of centrality, were application, curriculum, credit point, completion, graduation, approval, period, major, portal, department. Also, the major keywords were classified into 8 groups of course, register, student life, scholarship, library, dormitory, IT and commute. If the most frequent questions are organized into these areas to form the FAQ, based on the results above, it is expected to contribute to user convenience and the efficiency of administration by simplifying the service enquiry process for repeated questions, as well as enabling smooth two-way communication among the members of the university.

• Solar Energy
• /
• v.10 no.3
• /
• pp.3-12
• /
• 1990

This paper deals with experimental research to increase thermal storage efficiency of hot water stored in an actual storage tank for solar application. The effect of increased energy input rate due to stratification has been discussed and illustrated through experimental data, which was taken by changing dynamic and geometric parameters. Ranges of the parameters were defined for flow rate, the ratio of diameter to height of the tank and inlet-exit water temperature difference. During the heat storage, when the flow was lower, the temperature difference was larger and the ratio of diameter to height of the tank was higher, the momentum exchange decreased. As for this experiment, when the flow rate was 8 liter/min, the temperature difference was $30^{\circ}C$ and the ratio of diameter to height of the tank was 3, the momentum exchange was minimized resulting in a good thermocline and a stable stratification. In the case of using inlet ports, if the modified Richardson number was less than 0.004, full mixing occured and so unstable stratification occured, which mean that this could not be recommended as storage through thermal stratification. Using a distributor was better than using inlet ports to form a sharp thermocline and to enhance the stratification. It was possible to get storage efficiency of 95% by using the distributor, which was higher than a storage efficiency of 85% obtained by using inlet ports in same operation condition. Furthermore, if the distributor was manufactured so that the mainpipe decreases in diameter toward the dead end to maintain constant static pressure, it might be predicted that further stable stratification and higher storage efficiency are obtainable(ie:more than 95%).

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.1
• /
• pp.107-113
• /
• 2010

The criteria of tugboat requirement in domestic trading ports have been determined by the administrator of regional maritime affairs and port office on the basis of the regulations for the tugboat operations and management. But, there is a little confusion that the criteria of tugboat requirement and method for calculation of them are different from port to port and total power calculated on the basis of power per tugboat requirements by the number of tugs is not in accordance with total required power for the use of tug in several ports. The comparison of tugboat requirements among domestic major ports showed that it should be necessary for the criteria to be made in unified form. Because the current criteria are only on the basis q the ordinary condition with wind velocity under 10m/s, the criteria on the condition of the wind velocity over 10m/s are suggested to be necessary for the precautions against a disaster such as unexpected strong winds or typhoon.

• Journal of the Chungcheong Mathematical Society
• /
• v.15 no.2
• /
• pp.1-12
• /
• 2003

L. H. Encinas, A. J. Menezes, and J. M. Masque in [2] proposed a classification of isomorphism classes of hyperelliptic curve of genus 2 over finite fields with characteristic different from 2 and 5. Y. Choie and D. Yun in [1] obtained for the number of isomorphic classes of hyperelliptic curves of genus 2 over $F_q$ using direct counting method. In this paper we will classify the isomorphism classes of hyperelliptic curves of genus 2 over $F_{2^n}$ for odd n, represented by an equation of the form $y^2+a_5y=x^5+a_8x+a_{10}(a_5{\neq}0)$.

• Journal of applied mathematics & informatics
• /
• v.29 no.5_6
• /
• pp.1525-1532
• /
• 2011

The $m{\times}n$ Boolean matrix A is said to be of Boolean rank r if there exist $m{\times}r$ Boolean matrix B and $r{\times}n$ Boolean matrix C such that A = BC and r is the smallest positive integer that such a factorization exists. We consider the the sets of matrix ordered pairs which satisfy extremal properties with respect to Boolean rank inequalities of matrices over nonbinary Boolean algebra. We characterize linear operators that preserve these sets of matrix ordered pairs as the form of $T(X)=PXP^T$ with some permutation matrix P.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.7 no.1
• /
• pp.52-63
• /
• 1983

The purpose of the study is to find development of contact area, contact pressure and friction forces occurring at joints or connection areas inbetween structural members or mechanical parts. The problem has a pair of difficulties intrinsically; a constraint of displacement due to contact, and presence of work term by nonconservative friction force in the variational principle of the problem. Because of these difficulties, the variational principle remains in the form of inequality. It is resolved by penalty method and perturbation method making the inequality to an equality which is proper for computational purposes. A contact problem without friction is solved to find contact area and contact pressure, which are to be used as data for the analysis of the friction problem using perturbed variational principle. For numerical experiments, a Hertz problem, a rigid punch problem, and the latter one with friction effects are solved using $Q_2$-finite elements.

• Bulletin of the Korean Mathematical Society
• /
• v.53 no.6
• /
• pp.1651-1670
• /
• 2016

In this paper, we investigate exponentially biharmonic maps u : (M, g) ${\rightarrow}$ (N, h) from a Riemannian manifold into a Riemannian manifold with non-positive sectional curvature. We obtain that if $\int_{M}e^{\frac{p{\mid}r(u){\mid}^2}{2}{\mid}{\tau}(u){\mid}^pdv_g$ < ${\infty}$ ($p{\geq}2$), $\int_{M}{\mid}{\tau}(u){\mid}^2dv_g$ < ${\infty}$ and $\int_{M}{\mid}d(u){\mid}^2dv_g$ < ${\infty}$, then u is harmonic. When u is an isometric immersion, we get that if $\int_{M}e^{\frac{pm^2{\mid}H{\mid}^2}{2}}{\mid}H{\mid}^qdv_g$ < ${\infty}$ for 2 ${\leq}$ p < ${\infty}$ and 0 < q ${\leq}$ p < ${\infty}$, then u is minimal. We also obtain that any weakly convex exponentially biharmonic hypersurface in space form N(c) with $c{\leq}0$ is minimal. These results give affirmative partial answer to conjecture 3 (generalized Chen's conjecture for exponentially biharmonic submanifolds).

• Bulletin of the Korean Mathematical Society
• /
• v.57 no.4
• /
• pp.1061-1073
• /
• 2020

In this paper, the expressions of meromorphic solutions of the following nonlinear complex differential equation of the form $$f^n+Qd(z,f)=\sum\limits_{i=1}^{3}pi(z)e^{{\alpha}_i(z)}$$ are studied by using Nevanlinna theory, where n ≥ 5 is an integer, Q_d(z, f) is a differential polynomial in f of degree d ≤ n - 4 with rational functions as its coefficients, p₁(z), p₂(z), p₃(z) are non-vanishing rational functions, and α₁(z), α₂(z), α₃(z) are nonconstant polynomials such that α'₁(z), α'₂(z), α'₃(z) are distinct each other. Moreover, examples are given to illustrate the accuracy of the condition.