• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.237-240
• /
• 2002

지면에 가까이 있는 비행체나 수면에 가까이 있는 수중 운동체에서 도래하는 신호는 직접파와 반사파로 구성되어 있다. 그런 환경에서는 반사파가 직접파와 coherent한 관계를 갖는다. 이런 현상으로 해서 DOA추정을 위해 추정한 correlation 행렬이 singular한 성질을 갖게 된다. 이렇게 singular한 행렬은 DOA추정에 큰 오류를 내게 된다. 또 움직이는 대상의 경우 추정 correlation 행렬의 성질이 시간에 따라 변하게 된다. 본 논문에서는 위 두 상황을 함께 해결하기 위해서 PASTd알고리즘을 변형하여 Forward/Backward Variable forgetting factor를 도입한 PASTd알고리즘을 제안한다.

• Structural Engineering and Mechanics
• /
• v.34 no.1
• /
• pp.1-14
• /
• 2010

The innovative intelligent fuzzy weighted input estimation method which efficiently and robustly estimates the unknown time-varying input force in on-line is presented in this paper. The algorithm includes the Kalman Filter (KF) and the recursive least square estimator (RLSE), which is weighted by the fuzzy weighting factor proposed based on the fuzzy logic inference system. To directly synthesize the Kalman filter with the estimator, this work presents an efficient robust forgetting zone, which is capable of providing a reasonable compromise between the tracking capability and the flexibility against noises. The capability of this inverse method are demonstrated in the input force estimation cases of the plate structure system. The proposed algorithm is further compared by alternating between the constant and adaptive weighting factors. The results show that this method has the properties of faster convergence in the initial response, better target tracking capability, and more effective noise and measurement bias reduction.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.9
• /
• pp.1028-1036
• /
• 2008

In the OFDM system, IQ imbalance problem happens at the RF front-end of transceiver, which degrades the BER(bit error rate) performance because it affects the constellation in the received signal. Also, phase noise is generated in the local oscillator of transceivers and it destroys the orthogonality between the subcarriers. Conventional PNS algorithm is effective for phase noise suppression, but it is not useful anymore when there are jointly IQ(In-phase and Quadrature) imbalance and phase noise. Therefore, in this paper, we analyze the effect of IQ imbalance and phase noise generated in the down-conversion of the receiver. Then, we estimate and compensate the IQ imbalance and phase noise at the same time. Compared with the conventional method that IQ imbalance after IFFT is estimated and compensated in front of FFT via the feedback, this proposed method extracts and compensates effect of IQ imbalance after FFT stage. In case IQ imbalance and phase noise exist at the same time, we can decrease complexity because it is needless to use elimination of IQ imbalance in time domain and training sequences and preambles. Also, this method shows that it reduces the ICI and CPE component using adaptive forgetting factor of MMSE after FFT.

• Proceedings of the KIEE Conference
• /
• 2007.04c
• /
• pp.29-33
• /
• 2007

In this paper, time-varying parameter of passive telemetry RF sensor system is estimated using RLS(Rescursive $\leq$* Square) algorithm. In order to overcome the problems such as power limits and complication that general RF sensor system including IC chip has, the principle of inductive coupling is applied to model sensor system The model parameter is rearranged for applying RLS algorithm based on mathematical model to the derived model using inductive coupling principle. Time variant parameter of rearranged model is estimated using forgetting factor, and in case measured data is contaminated by noise and modelling error, the performance of RLS algorithm characterized by the convergence of squared error sum is verified by simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1352-1355
• /
• 1996

The control of diamond turning is usually achieved through a laser-interferometer feedback of slide position. If the tool post is rigid and the material removal process is relatively static, then such a non-collocated position feedback control scheme may surface. However, as the accuracy requirement gets tighter and desired surface contours become more complex, the need for a direct tool-tip sensing becomes inevitable. The physical constraints of the machining process prohibit any reasonable implementation of a tool-tip motion measurement. It is proposed that the measured force normal to the face of the workpiece can be filtered through an appropriate admittance transfer function to result in the estimated depth of cut. This can be compared to the desired depth of cut to generate the adjustment control action in addition to position feedback control. In this work, the design methodology on the admittance model-based control with a conventional controller is presented. The recursive least-squares algorithm with forgetting factor is proposed to identify the parameters and update the cutting process in real time. The normal cutting forces are measured to identify the cutting dynamics in the real diamond turning process using the precision dynamometer. Based on the parameter estimation of cutting dynamics and the admittance model-based nanodynamic control scheme, simulation results are shown.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.4
• /
• pp.414-422
• /
• 2002

In this paper, we propose a new method of adaptive neuro-fuzzy control using CFCM(Conditional Fuzzy c-means) clustering and fuzzy equalization method to deal with adaptive control problem. First, in the off-line design, CFCM clustering performs structure identification of adaptive neuro-fuzzy control with the homogeneous properties of the given input and output data. The parameter identification are established by hybrid learning using back-propagation algorithm and RLSE(Recursive Least Square Estimate). In the on-line design, the premise and consequent parameters are tuned to RLSE with forgetting factor due to a characteristic of time variant. Finally, we applied the proposed method to the water temperature control system and obtained better results than previous works such as fuzzy control.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.1
• /
• pp.27-36
• /
• 2014

This paper presents an adaptive wide-area damping controller (WADC) based on generalized predictive control (GPC) and model identification for damping the inter-area low frequency oscillations in large-scale inter-connected power system. A recursive least-squares algorithm (RLSA) with a varying forgetting factor is applied to identify online the reduced-order linearlized model which contains dominant inter-area low frequency oscillations. Based on this linearlized model, the generalized predictive control scheme considering control output constraints is employed to obtain the optimal control signal in each sampling interval. Case studies are undertaken on a two-area four-machine power system and the New England 10-machine 39-bus power system, respectively. Simulation results show that the proposed adaptive WADC not only can damp the inter-area oscillations effectively under a wide range of operation conditions and different disturbances, but also has better robustness against to the time delay existing in the remote signals. The comparison studies with the conventional lead-lag WADC are also provided.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.357-360
• /
• 2002

혈관에 흐르는 혈류 속도의 측정은 혈압 및 심박수와 관련된 혈류의 역학적 변화를 관찰하는 데 있어서 주로 사용되는 방법 중의 하나이다. 이 혈류 속도는 일반적으로 도플러 효과에 의하여 주파수가 변화하는 현상을 이용하여 추정하게 된다. 그런데 기존의 주파수 추정 방법들은 시불변 시스템을 가정하고 있지만 실제 혈관 속은 혈구가 일정하지 않은 속도를 갖는 시변 시스템이라 할 수 있기 때문에 이러한 시변 특성이 강한 경우 기존의 방법을 이용하게 되면 그 성능이 저하되는 경향을 보인다. 또 피시험자의 몸 상태에 따라서 서로 다른 주파수 변화 추이를 보이므로 하나의 고정 변수로써 최적화된 성능을 기대하기도 어렵다. 그러므로 본 논문에서는 시변 시스템에서 좋은 성능을 갖는 가변 망각 인자(variable forgetting factor, VFF)를 사용한 순환적인 완전 최소 자승법(recursive total least squares, RTLS) 기법을 이용한 주파수 추정 방법을 제안한다. RTLS란 TLS 기법을 순차적으로 계산하는 방법으로 시변 적응력을 향상시키는 방법이다. 또한 이 기법에 가변 망각 인자(VFF)를 적용시키는 것은 시변 시스템에서 외부적인 변화에 대하여 좀더 효율적으로 대응할 수 있기 위함이다. 기존의 방법과 성능 비교를 위하여 컴퓨터 시뮬레이션을 하였으며 그 결과 시변 시스템에서 본 논문에서 제안한 VFF를 이 용한 RTLS 기법이 보다 향상된 성능을 가지고 있음을 확인 할 수 있었다.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.4
• /
• pp.1759-1768
• /
• 2018

The energy density, power density and ohm resistance of battery change significantly as results of battery aging, which lead to decrease in the accuracy of the equivalent model. A parameter identification method of the equivale6nt circuit model with 3 R-C branches based on the test database of battery life cycle is proposed in this paper. This database is built on the basis of experiments such as updating of available capacity, charging and discharging tests at different rates and relaxation characteristics tests. It can realize regular update and calibration of key parameters like SOH, so as to ensure the reliability of parameters identified. Taking SOH, SOC and T as independent variables, lookup table method is adopted to set initial value for the parameter matrix. Meanwhile, in order to ensure the validity of the model, the least square method based on variable forgetting factor is adopted for optimizing to complete the identification of equivalent model parameters. By comparing the simulation data with measured data for charging and discharging experiments of Li-ion battery, the effectiveness of the full life cycle database and the model are verified.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1640-1641
• /
• 2007

In this paper, an experiment of weighted robust least squares frequency estimation for the Gaussian envelope chirp signal which is used in the time-frequency domain reflectometry system was carried out. By incorporating the forgetting factor to the frequency estimator, the weighted robust least squares filter achieved good enough frequency estimation performance for the chirp signal and it can be adopted to implement not only low cost time-frequency domain reflectometry but also real-time time-frequency domain reflectometry implementation.