• Journal of the Korean Wood Science and Technology
• /
• 제48권6호
• /
• pp.907-916
• /
• 2020

This research was conducted to investigate the linear expansion and resistance properties of a composite board (com-ply). This board was made of medium-density fiberboard (MDF) laminated using avocado (Persea americana), mahogany (Swietenia mahogani), and pine (Pinus merkusii) veneers. These three types of veneers were laminated on both surfaces of the MDF using adhesives, namely, epoxy and isocyanate. Glue (250 g·m^-2) was spread on the surface, followed by cold press for 3 h with an applied pressure of 15 kg·cm^-2. The research result revealed that com-ply exhibited an increased dimensional stability compared with MDF, indicated by reduction in water absorption, thickness swelling, and linear expansion. The com-ply made of the pine veneer and isocyanate adhesive exhibited high density, water absorption, thickness swelling, and screw withdrawal load. The com-ply that exhibited the strongest resistance to drywood termite attacks was the one made of the mahogany veneer and isocyanate adhesive. Moreover, the com-ply that exhibited the biggest weight loss (3.6 %) was made of the pine veneer and epoxy adhesive. The results of this research may facilitate in manufacturing com-ply using the selected veneer and adhesive without the application of hot press.

• Journal of the Korean Wood Science and Technology
• /
• 제47권2호
• /
• pp.239-248
• /
• 2019

This research presents an improvement of the physical and mechanical properties of composite board (com-ply) made of Oriented Strand Board (OSB) coated with wood veneer of Pine (Pinus merkusii), Avocado (Persea Americana) and Mahogany (Swietenia mahogany). 1.5 mm thick veneers of those three wood types were adhered to the surface of OSB using two adhesive types: epoxy and isocyanate. The adhesive with the glue spread of $250g\;m^{-2}$ applied using single glue line was spread and then cold pressed with the pressure of $15kg\;cm^{-2}$ for 3 hours. The research result showed an improving dimension stability of com-ply, but not found on all parameters of physical property test. The moisture content seemed to be influenced by the com-ply type, yet not related to its thickness swelling, water absorption and linear expansion. The exception took place in the parallel linear expansion when immersed for 2 hours. The highest to the lowest increases of MOE and MOR were consecutively found on OSB coated with wood veneer of Pine, Mahogany and Avocado. However, the increases were statistically insignificant. The highest increasing screw hold power was found at the com-ply type AE (avocado veneer and epoxy adhesive) that was by 28%.

• 한국산림과학회지
• /
• 제76권3호
• /
• pp.295-302
• /
• 1987

Korea is a small country with extremely high population density. Industrialization of the nation resulted GNP per capita of over 2,000$ in 1986 with an inevitable by-product, high level of pollution in many areas. Forest land is now acknowledged as not only a wood production site but also an origin of much more important intangible values, water and clean air, soil conservation, and recreational and scenic values. Mostly devastated forest land from Korean War has been recovered under the strong afforestation drive from the government. The first Forest Development Plan was mostly reforestation phase and the second Forest Development Plan is foundation establishment phase. The third and later Plans are to enlarge economical forest and to maintain sustatined yield phase. Forestry administration as well as forest research certainly played a great role in successful accomplishment of two Forest Development Plans. For effective planning and accomplishment of the third Forest Development Plan close cooperation among policy makers, forest managers and research workers are mostly required.

• Journal of the Korean Wood Science and Technology
• /
• 제51권5호
• /
• pp.334-344
• /
• 2023

Dregs from the sugar palm (Arenga pinnata) starch industry are considered a waste product of the agricultural industry and have not yet been optimally utilized. Therefore, this study aimed to manufacture particleboards from dregs using different amounts of adhesive and particle size ratios. Sugar palm dregs, which had been separated into fibers and powder/fine particles, were used as raw material for making particleboards. The fiber had an average length of 6.84 ± 3.23 cm, while the fine particles were of a size that passed through size 10 mesh and remained in size 60 mesh. Three ratios of fiber to fine particles (100:0, 75:25, and 50:50 wt%) with three different amounts of sucrose-citric acid adhesive (10, 15, and 20 wt%) were used in this study. Increasing the amount of fine particles and the resin content can improve the physical properties and the internal bond strength of boards made from sugar palm dregs. The fine particles possibly filled the gap between the fibers in the particleboard, while the fibers exhibited a high bending strength. As a result, a high-performance particleboard can be attained by combining the composition ratio of fiber/fine particles and resin content. In this study, particleboards made from fiber/fine particles (75:25 wt%) and adhesive content of 15 wt% and 20 wt% had the mechanical properties that met the requirements of Japanese Industrial Standard (JIS) A 5908 type 18. Sugar palm dregs have the potential to be used as raw materials to create value-added particleboards.

• 무역상무연구
• /
• 제47권
• /
• pp.357-377
• /
• 2010

The Ministry of Agriculture, Forestry and Fisheries(MAFF) of Japan established the aim which exports the agriculture, forestry and Fisheries products amounting to a trillion Yen until 2013 in 2004, endeavoring to realize the aim in strengthening both overseas publicity activities and domestic product system. Such changes means that the Japanese agriculture is exchanging defence into attack and gives a important meaning to our agricultures which have a similar agriculture base as Japan. The countermeasures for agricultural products export promotion by MAFF is greeting a 5th year now and obtains a considerable result in agricultural products exports and the export item. Meantime, There are also opinions that the Japanese agriculture has to make efforts to cut the product cost by a large margin in order to prepares a competitive power. we have to consider the counter-measure which will be able to accommodate harmoniously both of two facts that first, Japanese Export Promotion Strategy for agricultural products is giving a hope in the Japanese rural society which have been considered that remaking will be impossible until now, and secondly, the agricultural reform which the cutting of cost and price of agricultural products will be possible in has to be promoted.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권9호
• /
• pp.1278-1284
• /
• 2000

An experiment was performed to evaluate different methods for preserving shrimp by-products and to determine their chemical composition. In the first experiment three ratios of shrimp by-product (SBP) to molasses (6:1, 4:1 and 3:1, wet weight), and to cassava root meal (3:1, 2:1 and 1:1, wet weight of shrimp by-product and air-dry weight of cassava root meal) were investigated. The pH of the SBP ensiled with molasses at a ratio of 3:1, and with cassava root meal at a ratio of 1:1, decreased during the first week to below 4.5 and remained low up to day 56 of ensiling, whereas the pH of the mixtures with higher ratios of SBP remained above 7.0, and the material deteriorated rapidly. The dry matter decreased initially in all treatments but then increased slightly from day 28 in the treatment where shrimp by-product was ensiled with cassava root meal at a ratio of 1:1. The crude protein (CP) and ammonia-N $(NH_3-N)$ contents of the preserved shrimp by-product material ensiled with molasses at a ratio of 3:1 increased significantly one week after ensiling. The CP content then remained constant, while the $NH_3-N$ concentration continued to increase up to 56 days after ensiling. When SBP was ensiled with cassava root meal at a ratio of 1:1 the CP content of the silage increased significantly up to 21 days after ensiling and then decreased back to the original level after 56 days, whereas $NH_3-N$ increased markedly up to 14 days and then remained fairly constant up to 56 days. However, the $NH_3-N$ content was significantly higher when SBP was ensiled with cassava root meal than with molasses. A balance experiment was carried out, arranged as a double Latin-square and including 6 F1 (Large White ${\times}$ Mong Cai) castrates fed randomly one of three diets based on cassava root meal, rice bran, and fish meal (FM) or shrimp by-product ensiled with molasses (SBEMO) or with cassava root meal (SBECA) as the main protein source. Apparent organic matter and CP digestibilities were significantly (p<0.001) higher for the fish meal diet than for the two shrimp by-product diets, although CP digestibility in SBEMO and SBECA was similar (p>0.05). N-retention was significantly higher for the fish meal diet than for the SBEMO diet, which in turn was significantly higher than for the SBECA diet (p<0.01). It can be concluded that shrimp by-product can be preserved by ensiling with molasses at a ratio of 3:1 or with cassava root meal at a ratio of 1:1. Nutrient digestibility and N-retention of diets based on these shrimp by-product silages were lower than for similar diets based on fish meal, probably due to their high chitin content and inferior amino acid balance.

• Journal of the Korean Wood Science and Technology
• /
• 제48권4호
• /
• pp.458-471
• /
• 2020

Effect of pre-treatment and compression ratio on specific gravity (SG) and dimensional stability improvement of three lesser-used wood species from natural forest area of North Kalimantan Province, Indonesia had been investigated. Hot soaking at 80℃ for 3 hours within 2 and 5% of boron solution was applied as pre-treatment, while compression ratio applied was 20 and 40% from the initial thickness. Densification was conducted using hot pressing machine at 30 kg/㎠ of pressure and 160℃ of temperature for 15 minutes. Specific gravity was measured gravimetrically, while dimensional stability was evaluated through thickness swelling and water absorption as the indicator. Results show that SG of densified wood was influenced by wood species and compression ratio, but not by pre-treatment applied; while dimensional stability was influenced by wood species, compression ratio, and pre-treatment. Specific gravity and water absorption of densified wood was improved significantly. Specific gravity increased 28.86-63.03%, while water absorption decreased 12.80-15.89%. Thickness swelling of 20% densified wood was lower than that of 40% densified wood.

• Journal of the Korean Wood Science and Technology
• /
• 제48권1호
• /
• pp.76-85
• /
• 2020

This study was conducted to analyze the application of boron compounds, methyl methacrylate (MMA), and heat treatment (HT) on changes in the density, moisture content, and flexural properties of samama (Anthocephalus macrophyllus) wood. Samama wood was impregnated with borax (BX) and boric acid (BA) using a pressure method at 5 atm for 4 h. Afterwards, the wood was impregnated with MMA at the same pressure and duration. Finally, the samama wood was given HT at 90 ℃ and 180 ℃. The results indicate that there was a weight gain of 93.4% in the wood impregnated using BA and MMA monomer and HT at 90 ℃. Consequently, the wood's density increased by 82.3%. Increased MOE and MOR percentages of 32.2% and 29.4%, respectively, were also found. HT at 180 ℃ degraded the wood components and MMA, and consequently, the density, MOE, and MOR also decreased. The wood impregnated by BX, BA, and MMA, and subjected to HT also had decreased moisture content (MC). This research recommends that the application of boron (BX, BA) should be combined with an MMA monomer and HT at 90 ℃ as an alternative method to improve samama wood quality. If darker color is preferable, HT should be conducted at 180 ℃.

• Journal of the Korean Wood Science and Technology
• /
• 제46권2호
• /
• pp.155-165
• /
• 2018

The objective of the research was to evaluate the effect of particle pre-treatment on physical, mechanical, and durability of jatropha fruit hulls (JFH) particleboard. The pre-treatments included were immersing in cold water, hot water, and acetic acid solution. After each treatment, the particles were dried up to 3% moisture content. Urea-formaldehyde (UF) resin was used to fabricate particleboards with board size, thickness and density target of 25 cm by 25 cm, 0.80 cm, and $0.70g/cm^3$, respectively. Board pressed at $130^{\circ}C$ for 10 minutes, and $25kg/cm^2$ pressure. The evaluation of particleboard followed the JIS A 5908-2003. Whilist their resistance to subterranean termite test (mass loss, mortality, antifeedant value and feeding rate) refers to the Indonesian standard (SNI 01.7207-2006). The physical and mechanical properties of particleboards showed that all pre-treatments decreased the pH of particles. Overall, all particle immersing treatments resulted of better physical and mechanical properties of particleboard than those of untreated ones. The acetic acid treatment resulted the best physical and mechanical properties of particleboard. Based on the mass loss of JFH particleboard, hot water and acetic acid treated particleboards were classified into weak resistance to subterranean attack. The other two treatments were classified into very weak resistance. Hot water treated particleboard provided the highest mortality and antifeedant as much as 87.40% and 34.20%, respectively. Based on antifeedant classification, hot water treated particleboards were classified into moderately strong resistance, while other treatments were categorized into weak resistance. The lowest feeding rate value ($45.30{\mu}g/termite/day$) was attained by hot water treatment.

• Journal of the Korean Wood Science and Technology
• /
• 제44권4호
• /
• pp.494-504
• /
• 2016

Eucalyptus oils are widely used as spices, perfume industrial materials, food flavorings, and medicines. Several types of Eucalyptus oils also have insecticidal activity and as carminative. This study investigated the chemical composition, insecticidal (larvicidal and repellent) activity of E. urophylla oil against filarial mosquito Culex quinquefasciatus. E. urophylla oil was obtained from fresh leaves by water-steam distillation with oil yield 1.08%. E. urophylla oil in this study had no color (clear), has odor (typical eucalyptus), with specific gravity 0.941; refractive index 1.465; miscibility in 70% ethanol 1 : 3; and optical rotation (-) $5.83^{\circ}$. The major compounds of the oil were ${\alpha}$-pinene (11.73%), 1,8-cineole (49.86%), ${\beta}$-ocimene (6.25%), ${\gamma}$-terpinene (9.11%), and ${\alpha}$-terpinyl acetate (7.63%). The result showed the excellent insecticide activity against C. quinquefasciatus. The oil provided larvicidal activity with $LC_{50}$: 80.21 ppm and $LC_{90}$: 210.18 ppm, and repellent activity with $IC_{50}$: 0.82% and $IC_{90}$: 4.88%. The present study showed the effectiveness of E. urophylla as natural insecticide against C. quinquefasciatus, the mosquito vector of filariasis.