• Journal of Korean Society of Forest Science
• /
• v.99 no.3
• /
• pp.391-396
• /
• 2010

To analyze the characteristics of canopy fuel in Pinus densiflora stand, which is essential to assess the crown fire hazard, allometric equations for estimation of crown fuel biomass were developed by subjectively categorized crown fuel component and crown bulk density was analyzed by available fuel component categories. Ten trees were destructively sampled at Pinus densiflora stand in Mt. Palgong in Daegu and their crown fuels were weighed separately for each fuel category by size classes and by living and dead. Regression equations that estimate crown fuel load by diameter at breast height(D) or additional total height(H) were derived. The adjusted coefficient of determination values were the highest (${R^2}_{adj}$=0.835-0.996) and standard error of estimate were the lowest (SEE=0.074-0.638) in the allometric equation lnWt=${\alpha}+{\beta}lnD+{\gamma}lnH$ in average. However, in needles and small branches categories, the differences in ${R^2}_{adj}$ and SEE between equations were not significant. Crown bulk density (CBD), which was calculated by crown fuel load divided by crown volume, was 0.067 kg/$m^3$ in average when only needles were considered as available crown fuel and 0.097 kg/$m^3$ when needles and branches (0-0.5 cm diameter) were considered. The increments of CBD of needles and small branches were little even when diameter at breast height increased.

• Journal of Korean Society of Forest Science
• /
• v.89 no.3
• /
• pp.287-296
• /
• 2000

This study was carried out to examine and compare the changes of inhabitation of soil microarthropoda after forest fire between different types of forest; i.e. the coniferous forest (Mt. Chocdae) and the broad-leaved forest (Samsinbong in Mt. Chiri). The individuals of soil microarthropoda found at the burned and unburned areas of Samsinbong and Mt. Chocdae were 12 orders in 5 classes, and individuals of Insecta and Arachnida 98% of them. In respect of classification groups, Collembola order was high at the burned and unburned areas of coniferous forest, while Acari order was high at the broad-leaved area. When classified by soil depth, the total number of soil microarthropoda individuals inhabiting at Samsinbong, the broad-leaved forest, was 25,342 and 37,350 at 1~5cm depth of burned and unburned areas respectively, while at 5~10cm depth the number turned out 9,722 and 15,906. Soil microarthropoda individuals of unburned area was 1.6 times higher than for the burned area. At the coniferous forest, the number marked 31,665 and 51,431, respectively for 1~5cm depth of burned and unburned area, and 10,189 and 13,202 for 5~10cm depth. Here also, the number for the unburned area was examined to be 1.4 times higher than for the burned area.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.1
• /
• pp.46-54
• /
• 2021

This study compared and analyzed the effects of forest tending works on the vertical distribution of wildfire fuel loads on Pinus densiflora stands in Gyeongbuk province. The study sites were located in Youngju and Bonghwa in Pinus densiflora stands. A total of 10 sample trees were collected for the development of the crown fuel vertical distribution model. The 6th NFI (National Forest Inventory) selected a sample point that only extracted from managed and unmanaged stands of Pinus densiflora in the Gyeongbuk province. The fitness index (F.I.) of the two models developed was 0.984 to 0.989, with the estimated parameter showing statistical significance (P<0.05). A s a results, the vertical distribution of wildfire fuel loads range of unmanaged stands was from 1m to 11m with the largest distribution at point 5m at the tree height. On the other hand, the vertical distribution of wildfire fuel loads range of the managed stands was from 1m to 15m with the largest distribution at the point of 8m at the tree height. The canopy bulk density was 0.16kg/㎥ for the managed stands and 0.25kg/㎥ for the unmanaged stands, unmanaged stands were about 1.6 times more than managed stands. This result is expected to be available for simulation through the implementation of the 3D model as crown fuel was analyzed in three dimensions.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.4
• /
• pp.113-126
• /
• 2021

This study was conducted to analyze the forest status and deforestation area changes of the DMZ region in North Korea based on satellite images. Using growing and non-growing season's RapidEye satellite images, land cover of the North Korean DMZ was classified into stocking land(conifer, deciduous, mixed), deforested land(unstocked mountain, cultivated mountain, bare mountain), and non-forest areas. Deforestation rates in the Yeonan-baecheon, Beopdong-Pyeonggang, Heoyang-Geumgang and Tongcheon-Goseong district were calculated as 14.24%, 16.75%, 5.98%, and 16.63% respectively. Forest fire and land use change of forest were considered as the main causes of deforestation of DMZ. Changes in deforestation area were analyzed through Google Earth images. As a results, it was shown that the area of deforestation was on a decreasing trend. This study can be used as basic data for establishing inter-Korean border region's forest cooperation strategies by providing forest spatial information on the North Korea's DMZ.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.375-378
• /
• 2007

Kangwondo area is mountainous and landslide happens easily during the rainy period in summer time. Especially, when there is torrential downpour caused by the unusual weather change, there will be greater possibility to see landslide. Another reason behind landslide is the continuous forest fire in these several years. Since the surface of the earth has been changed by the fire, when rainfall comes, landslide just happens easily. Also, it is reported that landcover condition, excepted rainfall condition, is the most effect for determining landslide susceptibility area. In this study, it is determined a landslide vulnerable area and landcover information is extracted from four satellite image(Landsat TM), about the landslide vulnerable area, which is pictured for each year. And which distribution change is analyzed.

• Journal of the Korea Furniture Society
• /
• v.19 no.1
• /
• pp.83-90
• /
• 2008

Gypsum-wood composites were made by introducing inorganic substances into wood using calcium chloride, first treating solution, and sodium sulfate, secondary treating solution, by double diffusion process under atmospheric pressure at room temperature. The process conducted as follows: water saturated specimens were soaked in calcium chloride solutions at several concentration. Then the specimens were soaked further in saturated sodium sulfate solution, and they were leached in flowing tap water for 24h. To attain sufficient weight percent gain (WPG) values, the suitable concentration of calcium chloride and soaking time in saturated sodium sulfate solution were 20% and 48h, respectively. Inorganic substances were produced mainly in the lumina of tracheides. It was made sure that these substances were dihydrate gypsum($CaSO_4$ $2H_2O$) by X -ray microanalysis (SEM-EDX). The composites had good fire resistance due to low heat transfer rate of gypsum formed in wood. However, the composites had little decay resistances, because they showed high weight losses by test fungi attacks.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.111-111
• /
• 2010

The mold transformers have been widely used in underground substations in large building and have some advantages in comparison to oil-transformer, that is low fire risk, excellent environmental compatibility, compact size and high reliability. In addition, the application of mold transformer for outdoor is possible due to development of epoxy resin. The mold transformer generally has cooling duct between low voltage coil and high voltage coil. A mold transformer made by one body molding method has been developed for small size and low loss, but it needs some cooling method because heat radiation between each winding is difficult. In this paper, the temperature distribution and thermal stress analysis of H class 100kVA pole cast resin transformer for power distribution are investigated by FEM program.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2012.04a
• /
• pp.3-6
• /
• 2012

우리나라 목조 문화재 건축물은 재료특성상 화재위험에 항상 노출되어 있다. 특히 2005년 4월 4일 발생한 양양산불로 인해 낙산사의 주요 건축물과 동종 누각이 소실되었고 2008년 2월 10일 발생한 숭례문 화재로 인해 숭례문 목조구조물 대부분이 소실되었다. 목조 문화재 건축물 주요 구조재의 수종에 대한 데이터베이스는 현재 우리나라에 아직 갖춰져 있지 않고 있어 본 연구를 통해 세계문화유산으로 등재된 경주 양동마을의 목조 건축물에 대한 수종분석을 실시하였다. 그 결과 기둥과 보 부재 수종은 소나무 > 느티나무 > 상수리나무 순으로 구성되어 있고 도리 부재는 소나무 > 느티나무 > 전나무 순으로 구성되어진 것으로 나타났다. 따라서 소나무, 느티나무, 상수리나무, 전나무에 대해 열방출율, 총열방출량, 착화온도 등에 대한 분석을 실시하였다. 그 결과 각 수종에 따라 연소특성에 차이가 있음을 알 수 있었고 향후, 연소특성 데이터베이스를 통해 산불로 인한 화재성상 및 목조 화재성상 예측에 활용하고자 한다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.11a
• /
• pp.417-421
• /
• 2011

본 연구에서는 우리나라 전역에 군락으로 서식하는 상록 다년초인 맥문동을 이용한 현장 실험을 실시하여 지표화 방지 및 확산속도 저지를 위한 산불 이격거리를 제시하고자 삼척시 검봉산 맥문동 식재지에서 식재지 미식재지 총 4종류의 실험구를 설정하고 실험한 결과 맥문동 식재지는 미식재지에 비해 1.1-2.9배 산불확산속도 저지 효과가 있는 것으로 나타났으며, 지표화 발생시 산림내로 확산되기 전 초동진화에 필요한 시간(30분)을 감안하면, 산림인접지 부근의 식재폭은 최소 69m 최대 203m가 필요한 것으로 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.2
• /
• pp.73-78
• /
• 2008

Inorganic chemical treated wood was prepared by impregnation of calcium or magnesium chloride ($CaCl_2$ or $MgCl_2$) solution and immersion in saturated solution of ammonium fluoride ($NH_4F$) as a reactant in order to make an introduction of a refractory fluorides with fungicidal and insecticidal effects in wood. The weight percent gains (WPGs) were increased with increase in concentration of calcium chloride or magnesium chloride solution, and were higher in treatment with calcium chloride than with magnesium chloride. Inorganic substances were produced mainly in the lumina of tracheides. These substances were proved to be the calcium fluoride or magnesium fluoride by the energy dispersive X-ray analyzer in conjunction with a scanning electron microscope (SEM-EDX). The treated wood showed good decay resistance because the weight losses were hardly occurred by the test fungi such as Tyromyces palustris and Trametes versicolor. The fire resistance effect was superior to the treated wood compared with that of the untreated wood.