• Journal of Forest and Environmental Science
• /
• v.36 no.2
• /
• pp.163-172
• /
• 2020

The objective of this study was to develop evaluation criteria for forest education using the Context, Input, Process, and Product (CIPP) model. To this end, we designed a survey based on expert advice and content analysis of previous studies on the CIPP model and forest education. The survey was conducted on 393 forest education specialists, and Cronbach's α coefficient was set as 0.6 or higher to verify reliability and validity, and to determine reliability by factor. Eventually, 52 out of 57 evaluation items were extracted, and the evaluation indexes were selected through factor analysis as follows: four evaluation indexes for the context dimension, namely "Clarity of goal setting," "Developing conditions for education," "Meeting of requirements," and "Institutional drive"; three evaluation indexes for the input dimension, namely "Acquisition of education infrastructure," "Establishment of operational support," and "Adequacy of assigned manpower"; four evaluation indexes for the process dimension, which were "Adequacy of budget allocation," "Expertise of forest education instructors," "Diversity of programs," and "Public-private academic partnership"; and five evaluation indexes for the product dimension, namely "Effectiveness of perception change," "Influence over the society," "Continuity of improvement in evaluation," "Continuity of education," and "Verification of the effects of education."

• Korean Journal of Remote Sensing
• /
• v.19 no.1
• /
• pp.1-9
• /
• 2003

MODIS LAI product has been one of key variable for analyzing the quantitative aspects of terrestrial ecology at global scale. This study was designed to validate MODIS global LAI product for regional application. To examine the quality of MODIS LAI data, we developed a reference LAI surface that was derived by relating the ground LAI measurements to Landsat ETM+ reflectance. The study area, the Kwangneung Experiment Forest in Korea, covers mixed deciduous and coniferous species of temperate forest. Ground measurements of LAI were conducted at 30 sample plots by using a photo-optical instrument during the growing season of 2002. Ground measured LAI data were then related to the ETM+ reflectance to produce a continuous map of LAI surface over the study area. From the comparison between the MODIS LAI and the reference LAI, it was found that the MODIS LAI values were slightly higher at the forestland. Considering the limitations of producing the reference LAI surface and the uncertainty of the input variable for the MODIS LAI algorithm, such small discrepancy mal not be significant.

• Journal of Environmental Science International
• /
• v.14 no.6
• /
• pp.521-524
• /
• 2005

We introduce a simplified crossing wood drain disperses rain water concentration and is used to protect the road surface from erosion due to flooding over the unpaved road. The efficiency of a simplified crossing wood drain was also investigated. A structure of simplified crossing wood drain can be produced within 10 minutes and installed within 18 minutes. The cost of the this product is 1/5 of that of the existing crossing drain product. The production and installation cost can be reduced according to dexterity. In the context of such applications, the degrees of damage for a rubber pad, which preventing the rain overflow, were varied according to their materials. A type of 8.2mm thick fabric rubber was the most suitable in this study.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.679-684
• /
• 2002

MODIS LAI has been one of key products for analyzing the quantitative aspects ofterrestrial ecology. This study was designed to validate MODIS LAS product by using the reference LAI map that was derived from both ground measurements and ETM＋ surface reflectance. The study area, the Kwangneung Experiment Forest in Korea, covers mixed species of deciduous and conifers of temperate forest. Throughout the growing season of 2002, we have measured LAS at the 30 sample plots using an optical device. Ground measured LAS data were then correlated to the ETM＋ reflectance to produce a continuous map of LAS over the study area. Preliminary comparison between MODIS LAI and the reference LAI map showed the lower LAI values from the MODIS product.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2008.10a
• /
• pp.205-213
• /
• 2008

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2008.10a
• /
• pp.179-187
• /
• 2008

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.10a
• /
• pp.179-183
• /
• 2011

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.08a
• /
• pp.25-25
• /
• 2020

산초나무(Zanthoxylum schinifolium Siebold & Zucc.)는 운향과(Rutaceae)에 속하는 낙엽활엽관목으로 주로 열매, 잎, 줄기는 식·약용으로 이용한다. 최근 산초나무 부위별 추출물에서 항산화활성, 항염증효과, 미백효과 등에 관한 연구가 이루어지면서 산초나무의 가치가 더욱 증가하고 있다. 본 연구는 산초나무의 효율적인 유·무성 증식법을 구명하기 위해 종자 처리에 따른 발아특성, 생장조절물질 처리에 따른 가지삽목과 뿌리삽목의 발근특성을 조사하였다. 산초나무 종자는 3개월간 저온습사저장(종자:모래=1:1, -4℃)을 실시할 경우 약 64.0%가 발아하였다. 습사저장된 종자를 파종 직전에 GA3를 이용하여 0, 500, 1,000 및 2,000ppm 농도에서 처리한 결과 각 처리구별 발아율은 유의한 차이를 나타내지 않았다(F=1.556, p=0.260). 다만, 500ppm 농도에서 72.0%가 발아하여 가장 높은 발아율을 보였으며 1,000ppm 이상 처리구에서는 발아율이 다소 감소하는 경향을 나타냈다. 무성증식 방법은 2월 중순에 산초나무 가지삽수와 뿌리삽수를 채취한 후 IBA와 NAA를 각각 0, 500, 1,000 및 2,000ppm 농도로 처리하였다. 가지삽목을 실시한 대부분의 삽수에서 신초가 발생했으나, 발근율은 1.3~6.3%로 현저히 낮았다. 반면, 뿌리삽목은 3개월 후 부정아 발생율이 처리에 따라 58.3~83.3%로 조사되었으며, 발근율은 0~66.7%를 나타나 처리구별 발근율에 유의한 차이가 있었다(F=3.744, p=0.020). IBA 처리가 근삽수의 발근에는 효과적이었으며, 특히 IBA 2,000ppm 처리에서 66.7%의 발근율을 보여 가장 효과적임을 알 수 있었다. 결론적으로, 산초나무의 효율적인 유성증식을 위해서는 종자를 3개월간 저온습사저장하는 것이 효과적이며, 무성증식 방법으로는 가지삽목보다 뿌리삽목을 이용하는 것이 더 효과적인 것으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.2
• /
• pp.191-203
• /
• 2024

Persimmon wood (Diospyros kaki) is a seasonal fruit-producing plant with a beautiful dark pattern in its wood that is suitable for high-quality furniture, sculptures and musical instruments. The utilization of persimmon wood can be improved by determining its anatomical characteristics, such as juvenile and mature wood. This study aimed to determine the boundaries between juvenile and mature wood and observe the anatomical properties of juvenile and mature wood and their variations in the axial direction. Three 30-year-old persimmon (D. kaki) trees grown in Karo, North Sumatra, Indonesia, were used in this study. The boundary between juvenile and mature wood was determined by measuring the fiber length and vessel element length from near the pith to near the bark. Anatomical observations were conducted in the juvenile and mature wood areas. The results showed that the average boundaries between juvenile and mature wood were 44.11 mm from the pith and were not significantly different in the axial direction of the trees. Furthermore, the wood anatomy categories of juvenile and mature wood differed significantly in terms of fiber diameter, fiber proportion, vessel proportion, and axial parenchyma proportion. In the axial direction, vessel diameter, ray parenchyma frequency, and ray parenchyma proportion at the base, middle, and top of the tree were significantly different.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.6
• /
• pp.787-796
• /
• 2017

A low dimensional stability and poor bending strength properties were main problems in particleboard manufacturing. The objective of this research was to evaluate the effect of mixed wood species and urea-formaldehyde (UF) or urea-melamine-formaldehyde (UMF) resins on the physical and mechanical properties of three-layer particleboards. The ratio of face/core/back layer was 1 : 2 : 1. The resin content of 12% for both UF resins and UMF resins (UF/MF = 70/30% w/w) was used. The results of this study showed that the utilization of S.mahagony shaving using both UF and UMF resins caused a decrease in the thickness swelling and water absorption of the boards. Thickness swellings of particleboard made of Sengon/Sengon/Sengon (SSS), Mahogany/Mahogany/Mahogany (MMM), Sengon/Mahogany/Sengon (SMS), and Mahogany/Sengon/Mahogany (MSM) were in the range of 23%, 12~16%, 14~16%, and 13~21%, respectively. The board bonded with UMF resin demonstrated better dimensional stability than that bonded with UF resin alone. Modulus of elasticity (MOE) and modulus of rupture (MOR) of particleboards made of S. mahagony shaving in the surface layer in both MMM and MSM boards were better than those of the SSS and SMS. MOE of MMM and MSM board was in the ranges of 24,000 to $26,000kg.cm^{-2}$ and 18,000 to $21,000kg.cm^{-2}$ respectively. Meanwhile, the MOR of board was in the ranges of 200 to $240kg.cm^{-2}$ and 190 to $228kg.cm^{-2}$, respectively.