• The Journal of the Korea Contents Association
• /
• v.20 no.11
• /
• pp.77-87
• /
• 2020

This study aims to suggest basic data for developing forest product in Jeongeup City by surveying and analyzing consumer awareness and purchasing behavior. A survey was conducted focusing on local tourist attractions in Jeongeup City, and the analysis was conducted on 234 people. Among the local specialty processed products that the survey participants had experience in purchasing, food was mainly tea, concentrate solution, liquor, snacks and fruit syrup/enzyme. The therapy was shown in order of soap, aroma oil, and lotion. It was found that the purchase cost was more than 10,000 won and less than 30,000 won. Major purchase uses were for direct use and gifts, and 56.8% of the customers were satisfied with the satisfaction of the products, which were found to be purchased because of their good quality, good gift, and good health functions. In the question of 11 kinds of forest products, the subjects were aware of bokbunja, balloon flower, wild flower, deodeok, bracken, durum, and mal, among which bokbunja and wild flower were recognized as the representative forest products of Jeongeup. A cluster of food and therapy product selection attributes was analyzed to find target consumers. As the group that is interested in forest products and values the safety and quality of products is highly recognized, the value of forest products should be increased in consideration of the quality and safety of forest products when developing products in the future.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.2
• /
• pp.8-15
• /
• 2000

This study is a continuation of the previous experimental analysis and is mostly focused on handsheet strength properties. Four completely different fibers, which were Hw-BKP, SW-BKP, White ledger, and OCC, were selected to investigate the effect of mechanical pre-treatment by Hobart mixer on handsheet strehgth properties. After equal time mechanical pre-treatment, the fibers were refined with laboratory valley beater for 10, 20 and 30 minutes, and handsheets were prepared from the fibers for physical strength comparison. Handsheets from SW-BKP and OCC showed 5-30% increase of breaking length, burst index, tear index, and compression index while handsheets from HW-BKP and White ledger no increase except tear index. In Hobart mixer pre-treatment, HW-BKP and White ledger fibers were easily attached to the wall of the mixer bowl and mechanical action was not effectively applied. The fiber length of Hw-BKP and White ledger were 0.837 mm and 1.591 mm, respectively, while SW-BKP and OCC were 2.744 mm and 2.033 mm, respectively, in weight weighted length. The effective mechanical pre-treatment seems to be related to the fiber length. Tear indexes of the pre-treated furnish were much higher than no pre-treatment at the same breaking length level.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.04a
• /
• pp.70-70
• /
• 2000

This study is a continuation of the previous experimental analysis and is mostly focused on handsheet strength properties. Four completely different fibers, which were Hw-BKP, Sw-BKP, white ledger, and OCC, were selected to investigate the effect of mechanical pre-treatment by Hobart mixer on handsheet strength properties. After equal time mechanical pre-treatment, the fibers were refined with laboratory valley beater for 10, 20 and 30 minutes, and handsheets were prepared from the fibers for physical strength comparison. Handsheets from SW-BKP and OCC showed 5-30% increase of breaking length, burst index, tear index, and compression index while handsheets from HW-BKP and white ledger no Increase except tear index. In Hobart mixer pre-treatment, HW-BKP and white ledger fibers were easily attached to the wall of the mixer bowl and mechanical action was not effectively applied. The fiber length of Hw-BKP and white ledger were 0.837mm and 1.591 mm, respectively, while SW-BKP and OCC were 2.744 mn and 2.033 mm, respectively, in weight weighted length. The effective mechanical pre-treatment seems to be related to the fiber length. Tear indexes of the pre-treated furnish were much higher than no pre-treatment at the same breaking length level.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.4
• /
• pp.7-14
• /
• 2001

Recycled fibers usually give slow drainage in the paper forming process, which limits the application of more refining to the recycled fibers for improving paper strength and formation. To use recycled fibers more effectively, especially OCC, developing very efficient handling technique of short fibers and fines is inevitable. We tried to make hard flocs of fractionated short fibers and fines, which were the main cause of slow drainage, by adding excessive amount of retention aid selectively on them. This technique was proved to increase drainage considerably, but to decrease strength properties, compared to the conventional technique of adding the same amount of polymers to the whole furnish in the lab test. The bonding capability of short fibers and fines in Korean OCC was very poor. Various chemical treatment on the short fibers and fines of the Korean OCC did not improve their bonding and optical properties. One of the reasons of no improvement in their properties was their high amount of ashes.

• Journal of Korean Society of Forest Science
• /
• v.76 no.3
• /
• pp.275-294
• /
• 1987

In the United States, forest administration is a constantly changing complex of policies, programs, and management regulations. Forest administration is the product of a brief but tumultuous history during which much of the forests which once covered half the land were coutover for farms, industry, and cities. In the last 15 years, forest administration has been increasingly dominated by concerns for maintaining an ecological balance. Current forest administration is deeply rooted in the American traditions of decentralized federalism and free enterprise, yet combines state socialism and private capitalism. The major elements of U.S. forest administration consist of : 1) programs and policies on taxation, professional education and research, and "cooperative forestry", 2) state controls on forest practices for privately owned lands, and of federal policies and regulations for the management of federal lands. The federal Forest Service has played a lead role in developing and implementing national forest policies and programs. Since the end of World War II, the national forests managed by the Forest Service for multiple use have provided and ever growing fraction of domestic timber needs. In the coming decades, cultural and social trends may force a change in management policy on federal land, reducing the importance of timber harvesting in relation to amenity values.

• The Plant Pathology Journal
• /
• v.24 no.2
• /
• pp.159-163
• /
• 2008

Accurate identification of pine wood nematode, Bursaphelenchus xylophilus is a prerequisite to diagnose the pine wilt disease. However, a fungivorous nematode, B. mucronatus is highly similar to B. xylophilus and it is difficult to differentiate these two species by morphological features. A molecular diagnosis method, ITSRFLP was applied for the identification of B. xylophilus and B. mucronatus from Korea. Genomic DNA was extracted from a single individual nematode and ITS DNA was amplified by PCR. The size of PCR product was approximately 900bp and the sequence data were obtained after cloning. Amplified ITS was digested by 5 different restriction enzymes (Rsa I, Hae III, Msp I, Hinf I, and Alu I) and provided a discriminatory profile for B. xylophilus and B. mucronatus. Besides, B. mucro- natus was determined to have 2 different genotypes, East Asian type and European type also clearly separated by Rsa I and Hae III digestion. European type of B. mucronatus is recently collected from Pinus koraiensis and has not been reported before. ITS sequnce data were analyzed by Restriction Mapper program and the result supported ITS-RFLP pattern. These data indicated that PCRRFLP method is an accurate and simple way for identification of Bursaphelenchus species.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.6
• /
• pp.458-474
• /
• 2022

Many methods have been explored to increase the palatability of pine (Pinus merkusii), the most common wood used for termite baiting. However, because of the undersupply of pine in Indonesia, it is crucial to vary the wood species for termite baiting and look for potential alternatives. Furthermore, various studies have shown that baiting time influences the intensity and pattern of termite attacks. Therefore, the present research aimed to study the preferences of subterranean termites and find the ideal baiting time among community wood species from Bogor, West Java, as a baiting alternative to pine. The woods tested were Acacia mangium (acacia), Falcataria moluccana (sengon), Anthocephalus cadamba (jabon), Maesopsis eminii (manii), Swietenia mahagoni (mahogany), Hevea brasiliensis (rubberwood), and P. merkusii (pine). Field tests were carried out based on the American Society for Testing and Materials D 1758-06 at the Arboretum, Faculty of Forestry and Environment, IPB University, with a baiting time of one to six months. The results led to the identification of four species of termites, namely Microtermes sp., Macrotermes sp., Shedorhinotermes sp., and Capritermes sp.. The frequency of termite attacks on the test site reached 93.1%. Rubberwood was the most potential wood bait for subterranean termites, indicated by the highest average weight loss value (65.8%) with a shorter optimal baiting time (up to one month) than that of other tested woods.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.2
• /
• pp.93-103
• /
• 2022

Currently, biofibers are used as a reinforcement in polymer composites for structural elements and construction materials instead of the synthetic fibers which cause environmental problems and are expensive. One of the chemicals with a pH close to neutral that can be potentially used as a modified fiber material is sodium chloride (NaCl). Therefore, this study aims to investigate the characteristics of a composite board made from NaCl-treated kenaf fiber. A completely randomized design method was used with consideration of two factors: the content of NaCl in the treatment solution (1 wt%, 3 wt%, and 5 wt%) and the duration of immersion of fibers in the solution (1 h, 2 h, and 3 h). The NaCl treatment was conducted by soaking the fibers in the solution for different durations. The fibers were then rinsed with water until the pH of the water reached 7 and subsequently dried inside an oven at 80℃ for 6 h. Kenaf fiber and epoxy were mixed manually with the total loading of 20 wt% based on the dry weight of the fiber. Physical and mechanical properties of the fibers were then evaluated based on JIS A 5908 particleboard standards. The results showed that increasing NaCl content in the fiber treatment solution can increase the physical and mechanical properties of the composite board. The properties of fibers treated with 5 wt% NaCl for 3 h were superior with a modulus of elasticity of 2.085 GPa, modulus of rupture of 19.77 MPa, internal bonding of 1.8 MPa, thickness swelling of 3%, and water absorption of 10.9%. The contact angle of untreated kenaf fibers was 104°, which increased to 80° and 73° on treatment with 1 wt% and 5 wt% NaCl for 3 h, respectively.

• Journal of Korean Society of Forest Science
• /
• v.90 no.3
• /
• pp.355-362
• /
• 2001

This study was conducted to propose the way to develop and strengthen competitiveness of the Korean paper industry by analysing current competitiveness and the factors which determine and influence it. Delphi method was employed to identify determining factors of international competitiveness of Korean paper industry and evaluate the level of competitiveness. The competitiveness both in the domestic and foreign markets was evaluated by analysing each product market faced by the Korean paper industry in light of each of the determining factors. Based on the Delphi survey results, in order of importance, product quality, manufacturing cost, transportation and storage, timely delivery, supply of raw materials, and marketing were identified as the factors determining international competitiveness. Among them, it was revealed that Korean paper industry has a certain level of competitiveness in the factors such as product quality and timely delivery service while supply of raw materials and manufacturing costs were found to be inferior to overseas manufacturers in both domestic and foreign markets.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.53 no.2
• /
• pp.61-65
• /
• 2011

Biomass is considered to be a major potential fuel and renewable resource for the future. In fact, there is high potential to produce the large amount of energy from biomass around the world. In this study, to obtain basic data for practical application of agricultural and forest by-products as fuel of heating system in agriculture, agricultural and forest biomass resources were surveyed, the pelletizer with capacity of $50\;kg{\cdot}h^{-1}$ was designed and manufactured and pellets were made by the pelletizer. High heating value, ash content, etc. of pellets made of agricultural and forest by-products were estimated. Straw of rice was the largest agricultural biomass in 2009 and the total amount of rice straw converted into energy of $299{\times}10^3$ TOE. And in 2009, amount of forest by-product converted into energy of $9,579{\times}10^3$ TOE. High heating values of pellets made of stem and seed of rape, stem of oat, rice straw and rice husk were 16,034, 16,026, 16,089, 15,650, $15,044\;kJ{\cdot}kg^{-1}$ respectively. High heating values of pellets made of agricultural by-products were average 83.6% compared to that of wood pellet. Average bulk density of pellets made of stem and seed of rape, stem of oat, rice straw and rice husk was $1,400\;kg{\cdot}m^{-3}$ ($1.4\;g{\cdot}cm^{-3}$). Ash contents of the pellets were 6.6, 7, 6.2, 5.5, 33% respectively. Rice husk pellet produced the largest ash content compared to other kinds of pellets.