• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1412-1425
• /
• 2009

This paper suggests to standardize railway accident restoration types as the standardized code and to develop standard operation procedures(SOP) for the efficient railway accident management and recovery system. First of all, occurred damage types as the existing railway accident types in both domestic and foreign cases have been carefully analyzed and then reclassified. Therefore, this study suggested the combination of 3 distinct code factors: restoration class, restoration object, and restoration location to standardize them. In addition, temporary restoration SOP will play a major role in the railway accident database management system and SOP for the damage limitation and the prevention of accident spread.

• 대한기계학회논문집
• /
• 제16권10호
• /
• pp.1869-1876
• /
• 1992

본 연구에서는 고온에서 높은 강도특성을 유지하면서 동시에 내마모성이 뛰어 나 가스터어빈의 부재로서의 사용이 기대되는 탄화규소(SiC) 세라믹에 대하여, 고체입 자의 충격에 의해 생기는 손상에 미치는 입자의 재질 및 크기의 영향을 조사하였다. 또 각 형태의 손상발생 임계치와 강도저하에 미치는 입자크기의 영향에 관해서도 검토 하였다.

• 한국안전학회지
• /
• 제20권1호
• /
• pp.75-80
• /
• 2005

In this paper, when CF/EPOXY laminates for high efficiency space structure are subjected to FOD(Foreign Object Damage), the effects of temperature change on the impact damages(inter laminar separation and transverse crack) of CF/EPOXY laminates and the relationship between residual life and impact damages ale experimentally investigated. Composite laminates used in this experiment are CF/EPOXY orthotropic laminated plates, which have two-interfaces $[0^{\circ}_6/90^{\circ}_6]S$ and four-interfaces $[0^{\circ}_3/90^{\circ}_6/0^{\circ}_3]S$. CF/EPOXY specimens with impact damages caused by a steel ball launched from the air gun were observed by the scanning acoustic microscope under room and high temperatures. In this experimental results, various relations were experimentally observed including the delamination area vs. temperature change, the bending strength vs. impact energy and the residual bending strength vs. impact damage of CF/EPOXY laminates. And as the temperature of CF/PEEK laminates increases, the delaminaion areas of impact-induced damages decrease linearly. A linear relationship between the impact energy and the delamination areas were observed. As the temperature of CF/PEEK laminates increases, the delamination areas decrease because of higher initial delaminatin damage energy.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.383-388
• /
• 2001

Effects of particle property variation of cone crack shape according to impact velocity in silicon carbide materials were investigated. The damage induced by spherical impact having different material and size was different according to materials. The size of ring cracks induced on the surface of specimen increased with increase of impact velocity within elastic contact conditions. The impact of steel particle produced larger ring cracks than that of SiC particle. In case of high impact velocity, the impact of SiC particle produced radial cracks by the elastic-plastic deformation at impact regions. Also percussion cone was formed from the back surface of specimen when particle size become large and its impact velocity exceeded a critical value. Increasing impact velocity, zenithal angle of cone cracks in SiC material was linearly decreasing not effect of impact particle size. An empirical equation, $\theta=\theta_{st}-\upsilon_p(180-\theta_{st})(\rho_p/\rho_s)^{1/2}/415$, was obtained from the test data as a function of quasi-static zenithal angle of cone crack($\theta_{st}$), the density of impact particle(${\rho}_p$) and specimen(${\rho}_s$). Applying this equation to the another materials, the variation of zenithal angle of cone crack could be predicted from the particle impact velocity.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.67-70
• /
• 2004

An investigation was performed to study the impact damage of the laminated composite plates caused by a low- velocity foreign object with multi-scale modeling based on the concepts of Direct Numerical Simulation (DNS)[4]. In the micro-scale part, we discretize the composite plates through separate modeling of fiber and matrix for the local microscopic analysis. A micro-scalemodel was developed for predicting the initiation of the damage and the extent of the final damage as a function of material properties, laminate configuration and the impactor's mass, etc. Anda macro-scale model was developed for description of global dynamic behavior. The connection betweenmicroscopic and macroscopic is implemented by the tied interface constraints of LS-DYNA contact card. A transient dynamic finite element analysis was adopted for calculating the contact force history and the stresses and strains inside the composites during impact resulting from a point-nose impactor. The low-velocity impact events such as contact force, deformation, etc. are simulated in the macroscopic sense and the impact damages, fiber-breakage, matrix cracking and delamination etc. are examined in the microscopic sense.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.414-419
• /
• 2006

The ballast or other objects may be located on the rail road by a lump of ice, repairing operation on the track, or the strong gust due to the high speed running of the train. When a train operated in this condition, it causes serious damages to the wheel, train, and structures near the track, or the secondary ballast flying. To remove these objects safely, a ballast blower is suggested which was attached under the train. Firstly, the numerical analyses are investigated to find out the basic flow characteristics of the ballast blower. Next, the performance of the ballast blower is verified by wind tunnel experiments. Through these studies, it is expected that the ballast blower can be applied practically.

• Journal of Platform Technology
• /
• 제10권4호
• /
• pp.3-10
• /
• 2022

본 연구에서는 수소차에 사용되는 수소압력용기 비파괴 안전성 평가 플랫폼 개발을 위해 유한요소해석을 사용하여 안전성 평가 기준 개발에 대한 연구를 수행하였다. Type 4 수소 압력 용기의 안전성을 평가하기 위해 복합 재료의 특성에 따른 매개변수를 바탕으로 재료의 물성을 유한요소 해석을 통해 도출하였다. 이를 통해 수소압력용기에 사용되는 CFRP 복합소재의 기계적 특성을 바탕으로, 내부 결함을 모델링하고 수소압력용기에 대한 평가기준을 사용하여 내부결함에 대한 파손가능성 여부를 도출하는 프로세스를 연구하였다. 결함은 박리, 이물질, 표면 수직균열을 모델링하고 파손 기준에 따른 손상을 분석하여 비파괴검사를 통해 검출된 결함의 안전성 여부를 판단할 수 있는 방법을 연구하였다. 연구 결과 박리 결함은 수소 압력용기의 내부에 근접할수록 파손가능성이 높아졌으며, 수직 균열을 경우 균열의 깊이가 깊어질수록 손상가능성이 높게 나타났다. 또한, 이물질 결함의 경우 압력용기의 외부 방향에 비해 내부 방향에 위치한 경우 손상가능성이 높게 나타났다. 본 연구를 통해 결함의 종류, 형상 및 크기에 따른 수소압력용기의 안전성을 평가할 수 있는 방법을 제시하였으며, 향후 본 연구결과를 바탕으로 수소차량 압력용기의 비파괴시험 안전검사 플랫폼 개발 연구를 수행하고자 한다.

• 대한기계학회논문집A
• /
• 제26권5호
• /
• pp.932-938
• /
• 2002

In structural applications, brittle materials such as soda-lime glasses and ceramics are usually subjected to multiaxial stress state. Brittle materials with cracks or damage by foreign object impacts are apt to fracture abruptly from cracks, because of their properities of very high strength and low fracture toughness. But in most cases, the residual strength of structural members with damage has been tested under uniaxial stress condition such as the 4-point bend test. Depending upon the crack pattern developed, the strength under multiaxial stress state might be different from the one under uniaxial. A comparative study was carried out to investigate the influence of stress state on the residual strength evaluation. In comparable tests, the residual strength under biaxial stress state by the ball-on-ring test was greater than that under the uniaxial one by the 4-point bend test, when a small size indendation crack was introduced. In the case that crack having an angle of 90deg. to the applied stress direction, the ratio of biaxial to uniaxial flexure strength was about 1.12. The residual strength was different from crack angles to loading direction when it was evaluated by the 4-point bend test. The ratio of residual strength of 45deg. crack to 90deg. one was about 1.20. In the case of specimen cracked by a spherical impact, it was shown that an overall decrease in flexure strength with increasing impact velocity, and the critical impact velocity for formation of a radial and/or cone crack was about 30m/s. In those cases that relatively large cracks were developed as compared with the case of indented cracks, the ratio of residual strength under biaxial stress state to one uniaxial became small.

• Composites Research
• /
• 제22권1호
• /
• pp.22-31
• /
• 2009

최근 화석 연료가 고갈됨에 따라 대체 에너지 개발 연구가 활발히 진행되고 있다. 여러 대체 에너지들 중 풍력 발전기는 바람의 에너지를 전기적 에너지로 바꾸어 주는 시스템으로 매우 친환경적이기 때문에 다양하게 연구되고 있다. 따라서 본 연구의 목표는 500W급 소형 풍력 발전용 블레이드의 개발로서 외국에 비하여 상대적으로 풍속이 낮은 국내와 같은 지역에 적용할 수 있도록 설계 되어야 한다. 본 논문에서는 피로수명을 고려한 고효율 경량화 블레이드의 공력설계 및 구조설계 방법이 제안되었으며, 구조해석으로 선형 정적해석, 좌굴해석, 진동모드해석이 수행되었다. 또한 풍력 발전 시스템에 발생할 수 있는 유체충돌해석을 모사하였다. 해석결과들은 유압시험장비를 이용한 구조시험 빛 성능시험의 결과와 비교되었고, 비교적 잘 일치하여 설계결과의 안전성을 확인하였다.

• 한국자동차공학회논문집
• /
• 제8권6호
• /
• pp.247-258
• /
• 2000

It is thought that impact damages and hygrothermals can affect to CFRP (Carbon-fiber reinforced plastic) composite laminated due to the sensitivity on the composite laminated Therefore, this paper focuses on the fracture mechanisms experimentally based on a scanning acoustic microscope (SAM) when subjected to impact damages, i.e., foreign object damages(FOD), and also the influence of impact damages and hygrothermals on residual fatigue bending strength of CFRP laminates. Composite laminates used in the experiment are CF/EPOXY orthotropy laminated plates, which constist of two-interfaces [04/904]s. A steel ball launched by an air gun collides against CFRP laminates to generate impact damages. Bending fatigue tests are periodically interrupted for a nondestructive evaluation (NDE) measurement of the progrossive damages to built the fracture mechanism by impact damages, and three-point fatigue bending tests are carried out to investigate the influence of hygrothermals on the effect on the residual bending fatigue strength of CFRP laminates.