• 한국운동역학회지
• /
• 제20권4호
• /
• pp.421-427
• /
• 2010

The purpose of this study was to investigate the relationship between the quantitative analysis of biomechanical movement and the qualitative analysis of video software in order to evaluate for the walking movement. The fourteen collegiate students who agreed with the purpose and method of this study participated as subjects. The slow walking and fast walking of the subjects in the place of experiment were photographed, and calculated several mechanical factors. This empirical evidence from the experiment indicated the significant difference(p<.001) between each distant factors of the walking movement for both analyses methods, but there was no statistically significant difference between the spacial factors observed in the experiment. For more detail, no significant difference between the walking ratios that expressed the coordination between stride length and stride frequency was found. The findings also indicated the high coefficient of correlation(over r=.9) which supports higher explanation force for the biomechanical method and the Dartfish video software method. Therefore, if the data was gathered by using the proper experimental method, the video software method could be used just like the quantitative data of biomechanical method.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권5호
• /
• pp.219-225
• /
• 2003

This paper described about the acoustic wave measurement method to diagnose GIS for particles. We measured and analyzed the signals of acoustic waves with two type acoustic sensors having 125kHz and 50kHz resonant frequency respectively when the particles were bounced on the inside surfaces of GIS tanks by the electrostatic force. To use two sensors for the diagnosis of GIS, we set up the calibration method for this measurement method. We showed the output characteristics of two sensors according to the sizes and materials of particles in the experiment. As the results, the inception voltages bouncing particles depended on the materials and the extinction voltages bouncing them depended on the sizes and materials. We found out that the relationship between sizes of particles and output voltages of sensors didn't have linearity but the ratios of between peak values of two sensors depended on the materials of GIS enclosures and the sizes of particles.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권5호
• /
• pp.219-219
• /
• 2003

This paper described about the acoustic wave measurement method to diagnose GIS for particles. We measured and analyzed the signals of acoustic waves with two type acoustic sensors having 125kHz and 50kHz resonant frequency respectively when the particles were bounced on the inside surfaces of GIS tanks by the electrostatic force. To use two sensors for the diagnosis of GIS, we set up the calibration method for this measurement method. We showed the output characteristics of two sensors according to the sizes and materials of particles in the experiment. As the results, the inception voltages bouncing particles depended on the materials and the extinction voltages bouncing them depended on the sizes and materials. We found out that the relationship between sizes of particles and output voltages of sensors didn′t have linearity but the ratios of between peak values of two sensors depended on the materials of GIS enclosures and the sizes of particles.

• 제어로봇시스템학회논문지
• /
• 제22권3호
• /
• pp.177-185
• /
• 2016

This paper presents a method to design a controller for active suspension with 1-DOF decoupled models. Three 1-DOF decoupled models describing vertical, roll and pitch motions are used to design a controller in order to generate a vertical force, roll and pitch moments, respectively. These control inputs are converted into active suspension forces with geometric relationship. To design a controller, a sliding mode control is adopted. Frequency domain analysis and simulation on vehicle simulation software, CarSim$^{(R)}$, show that the proposed method is effective for ride comfort.

• Ocean Systems Engineering
• /
• 제8권2호
• /
• pp.201-221
• /
• 2018

In this paper a comprehensive study for the structural control of Jacket platform with Magneto-Rheological (MR) damper is presented. The control is implemented as a closed loop feedback of the applied voltage in the MR Damper using fuzzy logic. Nine cases of combinations with MR damper are presented to complete the work. The selection of the MR damper (RD 1005-3) is based on the operating parameters (i.e., the range of frequency and displacement). Bingham model is used to obtain the control forces. The damping co-efficient of the model is obtained using empirical relationship between the voltage in the MR damper and input velocity from the structural members. The force acting on the structure is obtained from Morison equation using P-M spectrum. The results show that the reliable control was obtained when there was a continuous connection of multiple MR dampers with the lower levels of the structure. Independent MR dampers at different levels provided control within a range, while the MR dampers placed at alternate positions gave very high control.

• Journal of Welding and Joining
• /
• 제21권3호
• /
• pp.40-45
• /
• 2003

The high-speed rotating arc process forms a flat bead surface with decreased penetration depth because the molten droplets are deflected by centrifugal force. Therefore the rotating arc welding for horizontal fillet welding increases the leg length with the increase of rotation frequency and prevents the deflection of weld bead and overlap. In this study, the relationship between the welding parameters and the weld bead shape - leg length and undercut - are investigated experimentally. Consequently, the weld quality could be improved by rotating arc welding, and sound weld bead was achieved when applied to horizontal fillet welding with 4mm gap by avoiding the undercut which is inevitable for the conventional GMA welding methods.

• 대한조선학회논문집
• /
• 제40권2호
• /
• pp.28-33
• /
• 2003

This study is performed to evaluate and design the dynamic characteristics of the onboard machinery with resilient mounts. To avoid resonance with onboard machinery and external force, it is necessary to calculate natural frequencies of the resilient mounting system more accurately. Natural frequencies of on board machinery are determined by rigid body properties(mass, moment of inertia, center of mass) of machinery and stiffness of mounts. But it is very difficult to calculate rigid body properties theoretically. And stiffness properties of rubber mounts vary with dynamic displacement, pre load, frequency and temperature, and so on. In this study, we have identified rigid body properties using experimental modal analysis and estimated dynamic stiffness of rubber mount for onboard machinery using measured vibration response during seatrial. We measured displacement excitation through deck under mounts and evaluated relationship between modes of resilient mounting system and main excitation sources of a ship.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.435-447
• /
• 2019

Energy Flow Finite Element Analysis (EFFEA) is a promising tool for predicting dynamic energetics of complicated structures at high frequencies. In this paper, the Energy Flow Finite Element (EFFE) formulation of complicated Mindlin plates was newly developed to improve the accuracy of prediction of the dynamic characteristics in the high frequency. Wave transmission analysis was performed for all waves in complicated Mindlin plates. Advanced Energy Flow Analysis System (AEFAS), an exclusive EFFEA software, was implemented using $MATLAB^{(R)}$. To verify the general power transfer relationship derived, wave transmission analysis of coupled semi-infinite Mindlin plates was performed. For numerical verification of EFFE formulation derived and EFFEA software developed, numerical analyses were performed for various cases where coupled Mindlin plates were excited by a harmonic point force. Energy flow finite element solutions for coupled Mindlin plates were compared with the energy flow solutions in the various conditions.

• Coupled systems mechanics
• /
• 제11권6호
• /
• pp.485-504
• /
• 2022

This paper presents nonlinear oscillations of a carbon nanotube reinforced composite beam subjected to lateral harmonic load with damping effect based on the modified couple stress theory. As reinforcing phase, three different types of single walled carbon nanotubes distribution are considered through the thickness in polymeric matrix. The non-linear strain-displacement relationship is considered in the von Kármán nonlinearity. The governing nonlinear dynamic equation is derived with using of Hamilton's principle.The Galerkin's decomposition technique is utilized to discretize the governing nonlinear partial differential equation to nonlinear ordinary differential equation and then is solved by using of multiple time scale method. The frequency response equation and the forced vibration response of the system are obtained. Effects of patterns of reinforcement, volume fraction, excitation force and the length scale parameter on the nonlinear responses of the carbon nanotube reinforced composite beam are investigated.

• 대한인간공학회지
• /
• 제28권1호
• /
• pp.9-19
• /
• 2009

Repetitive movement, inadequate working posture, overuse of force, physical contact with sharp edge, vibration and temperature were well known risk factors of WMSDs (Work-related Musculoskeletal Disorders). Many researchers have investigated the relationship between inadequate working postures and incidences of WMSDs of the upper extremities, whereas relatively few researchers have tried to evaluate workload associated with the lower-body postures. The effects of lower-limb postures including various knee flexion angles on the subjective discomfort, heart rate and EMG of lower-limb muscles were investigated in this study. Thirty graduate students were asked to maintain thirteen different body postures, and heart rate and EMG data of five muscle groups (electro spine, biceps femoris, vastus medialis, gastrocnemius and tibialis anterior) from each posture were collected during fifteen minutes sustaining tasks. All participants were also asked to report their discomfort ratings of body parts. Results showed that high subjective discomfort ratings and heart rates were reported at the postures of knee angles of $60^{\circ}$ and $90^{\circ}$, whereas low discomfort ratings were founded at the postures of chair heights with 20cm, 40cm, and sitting with crossed legged. The change of median frequency for each muscle group during fifteen minutes tasks was investigated for each body posture to evaluate the relationship between muscle fatigue and body posture. It was found that the trends of changes of median frequency were different based on muscle group as well as lower-limb body posture from this study.