• International Journal of Control, Automation, and Systems
• /
• 제5권2호
• /
• pp.111-116
• /
• 2007

The design problem of partial pole assignment (PPA) in two classes of frequency-domain MIMO models by constant gain feedback is investigated in this paper. Its aim is to design a constant gain feedback which changes only a subset of the open-loop eigenvalues, while the rest of them are kept unchanged in the closed-loop system. A near general parametric expression for the feedback gain matrix in term of a set of design parameter vectors and the set of the closed-loop poles, and a simple parametric approach for solving the proposed problem are presented. The set of poles do not need to be previously prescribed, and can be set undetermined and treated together with the set of parametric vectors as degrees of design freedom provided by the approach. An illustrative example shows that the proposed parametric method is simple and effective.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.172-178
• /
• 1993

This paper deals with the modeling and experiment of a robot system for force/impact control performance. The basic model is composed of a direct drive motor, servo amplifier, link, force sensor and environments. Based on the developed model, the stability of the whole system was analyzed via root locus method. For the force control, integral force compensation with velocity feedback method shows the best performance of all the explicit force control strategies. In dealing with impact, PID position control and the explicit force control method were implemented. Instead of add more damping to the robot system by velocity feedback, we developed a new passive damping method and it was also applied to enhance the damping characteristic of the system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1513-1518
• /
• 1996

A force reflecting hand controller can be used to provide more realistic information to the operator of a teleoperation system such as kinesthetic feedback from a slave robot. In this paper, a new design concept of a force reflecting 6-DOF hand controller utilizing the kinematic structure of a Stewart Platform is presented. Based on the optimal design technique of a Stewart Platform, a force reflecting hand controller has been designed and constructed to verify the technical feasibility of proposed design concept. In order to provide an operator with kinesthetic feedback information, a force mapping algorithm based on a reciprocal product of screws has been introduced. Finally, the technical feasibility of the design concept has been demonstrated through some of experimental results of the device under virtual environment on a real-time graphic system.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권2호
• /
• pp.232-240
• /
• 1998

This paper deals with a hybrid position/force control of a robot which is moving on the constrained object with constant force. The proposed controller is composed of a position and force controller. The position controller has a nonlinear compensator which is based on the dynamic robot model and the force controller is attached by feedforward element. A direct drive robot with hard nonlinearity which is controlled by the proposed algorithm has moved on the constrained object with a high stiffness and low stiffness. The results show that the proposed controller has more vibration suppression effects which is occurred to the constrained object with a high stiffness, than a existing feedback controller, and accurate force control can be obtained by comparatively a small feedback gain.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1212-1217
• /
• 2006

This study is concerned with static and sinusoidal disturbance rejection for a single periodic input disturbance with known period. In the area of active elimination of a disturbance force, the control input should have two different kinds of gains: one is to deliver a stable control and the other is a force component to cancel the external disturbance force. In this paper we employ a simple state feedback control law to make the balance beam stable and employ a linear observer to estimate the states which represent the external disturbance force components. Simulation results verify our proposed control method to reject a static and sinusoidal disturbance force.

• 한국정보통신학회논문지
• /
• 제18권2호
• /
• pp.276-281
• /
• 2014

본 논문은 산업용 로봇을 위한 힘 피드백 제어는 사람의 감각을 기반으로 한 작업을 대체하여 구현하기에 적합한 연마 시스템을 제안하였다. 기존 연마작업의 표면 연마, 비드처리, 기계 가공 디버링 등의 공정은 그 복잡성에서 자동화가 가장 곤란하다고 인식되어 주로 인력에 의존 해왔다. 본 연구에서는 연마 공구를 파지시킨 힘 제어 로봇에 의한 자동 연마 시스템의 구축과 힘 센서로부터 신호 피드백 제어 방식의 특성 파악과 연마 공정에 적응성을 검증했다. 또한 실용화를 목적을 위한 선박의 바닥 및 측면 연마에의 응용을 진행했다. 따라서 자체 제작한 연마로봇을 활용 한 표면 연마작업을 통하여 실험결과를 검증하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.828-833
• /
• 2003

Rigid plate elastically supported at the edges is modeled and the performance of the optimal vibration control under sinusoidal excitation is tested. The controller based on the linear quadratic regulator with output feedback is designed to control the multi-degree of freedom vibration. Relative weighting parameters are considered as design constraints to determine the limitation of maximum control force and state parameters. Control force calculated by proportional output feedback of the displacement and velocity is used to suppress the vibration induced by the sinusoidal external force. The active vibration control of vibrating plate by the LQR controller is examined through the numerical simulations that show the effectiveness of optimal control scheme on the three degrees of freedom structure.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3054-3056
• /
• 1999

There have been numerous risks for excavator operator in working space. To overcome these riske, many researchers have been studied automation of excavator system. In these studies, excavator system is introduced by many researchers based on master-slave force feedback system. In this paper, a remote manipulation excavator is introduced based on force feedback. The proposed remote manipulation excavator system can give a feeling that the operator maneuvers the object directly, resulting in improved reality and efficiency. To demonstrate its performance, experiments are carried out on a test bed which is built around a commercial Hyundai HX-60W hydraulic excavator.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2001년도 하계학술발표회
• /
• pp.16-17
• /
• 2001

• 산업경영시스템학회지
• /
• 제25권6호
• /
• pp.12-16
• /
• 2002

Virtual reality (VR) opened the possibility of moving beyond the 2-D world of conventional desktop systems to an immersive, multi-sensory environment generated by computer graphics. Haptic feedback (Haptics) is now starting to get recognition and use in intensive applications for manipulation, while smell and taste feedback are at the stage of early research. This paper reviews some current works on increased haptic feedback augmentation in virtual reality applications.