• Nuclear Engineering and Technology
• /
• v.48 no.4
• /
• pp.859-869
• /
• 2016

Component-scale modeling of boiling is predominantly based on the Eulerian-Eulerian two-fluid approach. Within this framework, wall boiling is accounted for via the Rensselaer Polytechnic Institute (RPI) model and, within this model, the bubble is characterized using three main parameters: departure diameter (D), nucleation site density (N), and departure frequency (f). Typically, the magnitudes of these three parameters are obtained from empirical correlations. However, in recent years, efforts have been directed toward mechanistic modeling of the boiling process. Of the three parameters mentioned above, the departure diameter (D) is least affected by the intrinsic uncertainties of the nucleate boiling process. This feature, along with its prominence within the RPI boiling model, has made it the primary candidate for mechanistic modeling ventures. Mechanistic modeling of D is mostly carried out through solving of force balance equations on the bubble. Forces incorporated in these equations are formulated as functions of the radius of the bubble and have been developed for, and applied to, low-pressure conditions only. Conversely, for high-pressure conditions, no mechanistic information is available regarding the growth rates of bubbles and the forces acting on them. In this study, we use direct numerical simulation coupled with an interface tracking method to simulate bubble growth under high (up to 45 bar) pressure, to obtain the kind of mechanistic information required for an RPI-type approach. In this study, we compare the resulting bubble growth rate curves with predictions made with existing experimental data.

• The Journal of Fisheries Business Administration
• /
• v.41 no.3
• /
• pp.103-127
• /
• 2010

The FAO reports that IUU fishing activities have widespread economic, social, and management consequences, including depriving legitimate fishers of harvest opportunities. It affects all fisheries from small scale to industrial. It also affects the ability of governments to support sustainable livelihoods for fishers and, more broadly, to achieve food security. The complexity of IUU requires various measures to combat IUU fishing such as adoption of IUU vessel lists; stronger port State controls; improved monitoring, control and surveillance (MCS); implementation of market-related measures to help ensure compliance; and capacity-building assistance. Trade and market measures reduce opportunities for IUU fishing activities by precluding or impeding access to markets for IUU product in a manner consistent with international law. ICCAT, CCAMLR, and IATTC, have put in place trade tracking programs or catch documentation schemes, and WCPFC is considering such a program. Vessel lists assist enforcement authorities in determining which vessels are or are not authorized to be fishing or conducting fishing support activities in specified areas. A number of RFMOs maintain records of IUU vessels: CCAMLR, IATTC, ICCAT, NAFO, NASCO, NPAFC, WCPFC. Section 608 of the US MSRA calling on the Secretary of Commerce, in consultation with the Secretary of State, and in cooperation with relevant regional fishery management councils and any relevant advisory committees, to take actions to improve the effectiveness of international fishery management organizations in conserving and managing stocks under their jurisdiction. EU IUU Regulation entered into force on 1 January 2010, was intended to regulate the highly complex multi-channel fisheries supply system of the European Community (EC) in an effort to improve global fisheries sustainability.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.05a
• /
• pp.169-174
• /
• 2007

The purpose in having a control rod an a buoy system is to control the motion of it. The system may be composed entirely af a single circular cylinder finder and a lang mooring anchor cable. A control rod has one function to perform in meeting its purpose, and that is to develop a control force in consequence of its orientation and movement relative to the water. The forces and moments generated as a result of the effects of mutual interference, then determine the stability characteristics of the body. In this paper, the study of control-rod-attached buoy's 2-dimensional section was accomplished. model tests and numerical simulations had been carried out with different diameters of control rods. and varying the Reynolds number $Re=5,000{\sim}25,000$ based an the cylinder diameter(D=50mm) to. predict the performance af the body and the 2 frame particle tracking method had been used to obtain the velocity distribution in the flaw field 50mm circular cylinder had been used during the whale experiments and measured results had been compared with each other.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.33 no.2
• /
• pp.154-161
• /
• 2010

The conning display which is located in the ship bridge shows the various important information such as ship position, ship speed, track data, rate of turn, thruster rpm so on, and is one of the IBSs(Integrated Bridge Systems). In this study, the survey was conducted for ten officers to find the importance and using frequency of the information which were displayed in the conning display. The results showed that the information of drift speed, ship speed, wind direction and wind force, rate of turn, sea water depth, ship position, heading, thrust rpm, alarm, rudder command and angle got high scores and it meant that these information were very important and high frequency of use during the navigation. The optimized contents arrangement in conning display was suggested based on importance and using frequency of information. The experiment using eye-tracking system was conducted to compare the performance time and error rate of nine different scenarios for suggested arrangement display and three other existing displays. The results showed that the suggested arrangement was the best in performance time and error rate. The scenario concerning the direction and speed of wind showed faster performance time and lower error rate than other scenarios. The movement of subject's eye tended to search from the center and to avoid the comer, called 'the comer effect.' It is expected that the results of this study could help for the bridge staff to grasp the sailing information easily and to cope with the given situations promptly.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.2
• /
• pp.200-207
• /
• 2017

The purpose in having a control surface on ships is to control the motion of the ship. The control surface may be composed entirely of a single movable surface or of a combination of fixed and movable portions. A control surface has one sole function to perform in meeting its purpose, and that is to develop a control force in consequence of its orientation and movement relative to the water. The forces and moments generated as a result of this rotation and angle of attack then determine the manoeuvring characteristics of the ship. In this paper, two-dimensional flow characteristics of a flapped rudder and a water-blowing control rudder were accomplished respectively by PIV method in a circulating water channel. Model test has been carried out with different angles of attack of main foil (NACA 0012) and flap's deflection angles to predict the performance of the flapped rudder and the water-blowing control rudder. The 2-frame particle tracking method has been used to obtain the velocity distribution in the flow field. $Re{\fallingdotseq}3.0{\times}10^4$ has been used during the whole experiments and measured results have been compared with each other.

• Journal of the Korean Society of Safety
• /
• v.26 no.4
• /
• pp.41-46
• /
• 2011

The purpose of this paper is to analyze the causes of accidents related to the 3 phase 170 kV gas insulated switchgear of a power system collected from accident sites to secure data for the prevention of similar accidents and provide important points of view regarding diagnosis for the prevention of accidents involving gas insulated switchgears. The analysis results of the causes of accidents involving gas insulated switchgears showed deformation of the manipulation lever installed at the S-phase, disconnection of the insulation rod connection, melting of the upper conductor, a damaged tulip, damage to the lower spacer and the spacer at the breaker, etc. It is believed from this result that the potential for accidents has expanded due to accumulated energy as a result of repeated deterioration. The carbonization depth of a GIS was formed near the screw (T2, T3) used to secure the lower pole of the S-phase tulip. It is not known what has caused the screws to be extruded and melted. However, it is thought that an unbalanced electromagnetic force, micro-discharge, surface discharge, etc., have occurred at that point. In addition, even though 16 years have passed since its installation, there was no installation defect, act of arson, accidental fire, etc. General periodical inspection and diagnosis failed to find the factors causing the accidents. As a system contained in a closed metal container, it has a high risk factor. Therefore, it is necessary to design, install and operate a GIS in accordance with the standard operational procedure (SOP). In addition, it is necessary to apply conversion technology for periodical SF6 gas analysis and precision safety diagnosis. It is expected that tracking and managing these changes in characteristics by recording the results on the history card will provide a significant accident prevention effect.

• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.20 no.6
• /
• pp.47-54
• /
• 2018

The purpose of this study is to verify the long - range measurement performance for practical field application of VDMS. The reliability of the VDMS was verified by comparison with the existing monitoring sensor, GPS, Accelerometer and LDS. It showed the ability to accurately measure the dynamic displacement by tracking a motion of free vibration of target. And using the PSD function of measured data, the results in the frequency domain were also analyzed. We judged that VDMS is able to identify the higher system mode and has sufficient reliability. Based on the reliability verification, we conducted tests for long-distance applicability for actual application of VDMS. The distance from the stationary target model structure was increased by 50m interval, and the maximum distance was set to 400m. From the distance of 150m, the image obtained by the commercial camcorder has an error in the analysis, so the measured displacement comparison was performed between the LDS and the refractor telescope measurement results. In the measurement results of the displacement area of VDMS, the data validity was deteriorated due to the data shift by the external force and the quality degradation of the enlarged image. However, even under the condition that the effectiveness of the displacement measurement data of VDMS is low, the first mode characteristic included in the free vibration of the object is clearly measured. If the influence from the external environment is controlled and stable data is collected, It is judged that reliability of long-distance VDMS can be secured.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.4
• /
• pp.382-394
• /
• 2022

The treatment of patients with severe periodontitis should be proceeded step-bystep through an accurate diagnosis of each patients' individual tooth and with a strategic treatment plan. Implant-supported fixed prosthetic restoration has the advantage of high patient satisfaction and stable vertical dimension compared to the removable partial denture. However, multiple teeth defect areas lacking hard tissue may be disadvantageous in aesthetic failure and longer treatment time. In addition, it takes a certain period of time to manufacture and install a conventional fixed prosthesis, and during this process, the provisional prosthesis must satisfy the mechanical, biological, and aesthetic requirements of teeth. The purpose of this article is to describe the fabrication of implant-supported fixed prosthesis through a step-by-step approach in a partially edentulous patient.

• Korean Medical Education Review
• /
• v.25 no.2
• /
• pp.84-101
• /
• 2023

Longitudinal data can provide important evidence with the potential to stimulate innovation and affect policies in medical education and can serve as a driving force for further developments in medical education through evidence-based decisions. Tracking and observing cohorts of students and graduates using longitudinal data can be a way to link the past, present, and future of medical education. This study reviewed practical methods and technical, administrative, and ethical considerations for the establishment and operation of a longitudinal database and presented examples of longitudinal databases. Cohort study design methods and previous examples of research using longitudinal databases to explore major topics in medical education were also reviewed. The implications of this study are as follows: (1) a systematic design process is required to establish longitudinal data, and each university should engage in ongoing deliberation about this issue; (2) efforts are needed to alleviate "survey fatigue" among respondents and reduce the administrative burden of those conducting data collection and analysis; (3) it is necessary to regularly review issues of personal information protection, data security, and ethics regarding the survey respondents; and (4) a system should be established that integrates and manages a longitudinal database of medical education at the national level. The hope is that establishing longitudinal data and cohorts at individual medical schools will not be a temporary phenomenon, but rather that they will be well utilized at the national level to innovate and implement ongoing changes in medical education.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.245-245
• /
• 2021

해양으로 유출된 5 mm 이하의 크기로 분해된 미세플라스틱이 해양 환경 오염의 주요 원인으로 자리잡았다. 최근에는 청정해역으로 알려진 남극해에서도 발견되고 있어 남극해에 잔류하는 미세플라스틱 오염 수준을 이해하기 위해 노력하고 있다. 하지만, 파랑의 효과를 고려한 남극해의 해수 순환 구조와 미세플라스틱의 고유 특성을 반영한 미세플라스틱의 거동 및 공간적 분포에 대한 복합적 이해는 상대적으로 부족하다. 남극해에서 발견된 미세플라스틱은 과학기지들의 방류수나, 조사선 등과 같은 인위적인 활동으로 인해 집적될 수 있으며, 특히 영구적으로 거주하는 과학기지에서 흘려보내는 방류수에 포함된 미세플라스틱은 과학기지 주변 해수 오염에 직접적인 영향을 줄 것으로 예상된다. 따라서, 본 연구에서는 파랑 효과에 따른 남극 킹조지 섬(King George Island)에 위치한 세종과학기지의 방류수에 포함된 미세플라스틱의 이송에 대해 모의하였다. 세종과학기지가 위치한 킹조지 섬과 넬슨 섬(Nelson Island) 사이의 멕스웰 만(Maxwell Bay)의 해수 흐름을 재현하기 위하여 해수 유동 모델(Delft3D-FLOW)이 사용되었다. 또한, 해수 유동 모델에 파랑 모델(Delft3D-WAVE)을 결합하여 파랑의 효과가 미세플라스틱의 이송에 미치는 영향을 확인하였다. 세종과학기지의 방류수가 흘러나가는 마리안 소만(Marian Cove)의 유속장을 바탕으로 이송, 확산, 입자의 침강 속도를 고려하여서, 세종과학기지에서 밀물 시 방출한 입자를 라그랑지안 입자 추적(Lagrangian Particle Tracking) 방법을 이용해 추적하였다. 해수의 밀도보다 가벼운 플라스틱의 경우 해수 표층의 흐름을 따라 소만 내부로 이송되어 해안선에 도달하고, 해수의 밀도보다 무거운 플라스틱의 경우 소만 내부로 이송되나 입자의 침강 속도로 인해 방출 위치 근처에서 집적된다. 파랑의 효과를 고려하게 되면, 고려하기 전보다 두 종류의 미세플라스틱 모두 소만 내부로 더 멀리 이송되는데, 이는 파랑으로 인한 힘(wave-induced force)이 해수 유동 모델의 운동방정식에 추가되며 파랑 에너지 분산으로 인해 해수 흐름에 변화를 준 것으로 보인다.